On Mon, 20 Mar 2017, Hans de Goede wrote:
> Add mfd driver for Intel CHT Whiskey Cove PMIC, based on various non
> upstreamed CHT Whiskey Cove PMIC patches.
>
> This is a somewhat minimal version which adds irqchip support and cells
> for: ACPI PMIC opregion support, the i2c-controller driving the external
> charger irc and the pwrsrc/extcon block.
>
> Further cells can be added in the future if/when drivers are upstreamed
> for them.
>
> Cc: Bin Gao <bin....@intel.com>
> Cc: Felipe Balbi <felipe.ba...@linux.intel.com>
> Cc: Andy Shevchenko <andriy.shevche...@linux.intel.com>
> Signed-off-by: Hans de Goede <hdego...@redhat.com>
> Reviewed-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
> ---
> Changes in v2:
> -Since this uses plain mfd and not the intel_soc_pmic stuff give it
> its own Kconfig and allow this to be built as a module
> -Add missing #include <acpi/acpi_bus.h>
> Changes in v3:
> -Drop #include <acpi/acpi_bus.h> again, not the right fix for the build errors
> -Error out when the upper byte of the register-address passed to the regmap
> functions is 0 rather then hardcoding an address in that case
> -Various minor style tweaks / cleanups
> -Move defines of regulator register addresses to intel_pmic_chtwc.c,
> it is the only place where they are used
> -Drop now empty include/linux/mfd/intel_chtwc.h
> -Rename intel_soc_pmic_chtwc.c to intel_cht_wc.c to match Kconfig option name
> -Add irqchip support
> -Add external charger cell
> -Add pwrsrc cell
> Changes in v4:
> -Use PLATFORM_DEVID_NONE
> ---
> drivers/mfd/Kconfig | 11 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/intel_soc_pmic_chtwc.c | 244
> +++++++++++++++++++++++++++++++++++++
> 3 files changed, 256 insertions(+)
> create mode 100644 drivers/mfd/intel_soc_pmic_chtwc.c
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 55ecdfb..d427a10 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -437,6 +437,17 @@ config INTEL_SOC_PMIC
> thermal, charger and related power management functions
> on these systems.
>
> +config INTEL_SOC_PMIC_CHTWC
> + tristate "Support for Intel Cherry Trail Whiskey Cove PMIC"
> + depends on ACPI
> + depends on I2C
Nit: Any reason why these can't be on one line?
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + help
> + Select this option to enable support for the Intel Cherry Trail
> + Whiskey Cove PMIC found on some Intel Cherry Trail systems.
> +
> config MFD_INTEL_LPSS
> tristate
> select COMMON_CLK
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 31ce076..d2ca514 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -209,6 +209,7 @@ obj-$(CONFIG_MFD_SKY81452) += sky81452.o
> intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> +obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
> obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
>
> obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
> diff --git a/drivers/mfd/intel_soc_pmic_chtwc.c
> b/drivers/mfd/intel_soc_pmic_chtwc.c
> new file mode 100644
> index 0000000..50aec44
> --- /dev/null
> +++ b/drivers/mfd/intel_soc_pmic_chtwc.c
> @@ -0,0 +1,244 @@
> +/*
> + * MFD core driver for Intel Cherrytrail Whiskey Cove PMIC
> + * Copyright (C) 2017 Hans de Goede <hdego...@redhat.com>
> + *
> + * Based on various non upstream patches to support the CHT Whiskey Cove
> PMIC:
> + * Copyright (C) 2013-2015 Intel Corporation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + */
We have a shortened version of the licence now -- any reason why it
can't be used here?
> +#include <linux/acpi.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/intel_soc_pmic.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +
> +/* PMIC device registers */
> +#define REG_OFFSET_MASK GENMASK(7, 0)
> +#define REG_ADDR_MASK GENMASK(15, 8)
> +#define REG_ADDR_SHIFT 8
> +
> +#define CHT_WC_IRQLVL1 0x6e02
> +#define CHT_WC_IRQLVL1_MASK 0x6e0e
> +
> +/* Whiskey Cove PMIC share same ACPI ID between different platforms */
> +#define CHT_WC_HRV 3
> +
> +/* Level 1 IRQs (level 2 IRQs are handled in the child device drivers) */
> +enum {
> + CHT_WC_PWRSRC_IRQ = 0,
> + CHT_WC_THRM_IRQ,
> + CHT_WC_BCU_IRQ,
> + CHT_WC_ADC_IRQ,
> + CHT_WC_EXT_CHGR_IRQ,
> + CHT_WC_GPIO_IRQ,
> + /* There is no irq 6 */
> + CHT_WC_CRIT_IRQ = 7,
> +};
> +
> +static struct resource cht_wc_pwrsrc_resources[] = {
> + DEFINE_RES_IRQ(CHT_WC_PWRSRC_IRQ),
> +};
> +
> +static struct resource cht_wc_ext_charger_resources[] = {
> + DEFINE_RES_IRQ(CHT_WC_EXT_CHGR_IRQ),
> +};
> +
> +static struct mfd_cell cht_wc_dev[] = {
> + {
> + .name = "cht_wcove_pwrsrc",
> + .num_resources = ARRAY_SIZE(cht_wc_pwrsrc_resources),
> + .resources = cht_wc_pwrsrc_resources,
> + },
> + {
}, {
> + .name = "cht_wcove_ext_chgr",
> + .num_resources = ARRAY_SIZE(cht_wc_ext_charger_resources),
> + .resources = cht_wc_ext_charger_resources,
> + },
> + {
}, {
> + .name = "cht_wcove_region",
> + },
One line please.
> +};
> +
> +/*
> + * The CHT Whiskey Cove covers multiple i2c addresses, with a 1 byte
"I2C"
"Byte"
> + * register address space per i2c address, so we use 16 bit register
"I2C"
> + * addresses where the high 8 bits contain the i2c client address.
"I2C", etc.
> + */
> +static int cht_wc_byte_reg_read(void *context, unsigned int reg,
> + unsigned int *val)
> +{
> + struct i2c_client *client = context;
> + int ret, orig_addr = client->addr;
> +
> + if (!(reg & REG_ADDR_MASK)) {
> + dev_err(&client->dev, "Error i2c address not specified\n");
> + return -EINVAL;
> + }
> +
> + client->addr = (reg & REG_ADDR_MASK) >> REG_ADDR_SHIFT;
> + ret = i2c_smbus_read_byte_data(client, reg & REG_OFFSET_MASK);
> + client->addr = orig_addr;
> +
> + if (ret < 0)
> + return ret;
> +
> + *val = ret;
> + return 0;
> +}
> +
> +static int cht_wc_byte_reg_write(void *context, unsigned int reg,
> + unsigned int val)
> +{
> + struct i2c_client *client = context;
> + int ret, orig_addr = client->addr;
> +
> + if (!(reg & REG_ADDR_MASK)) {
> + dev_err(&client->dev, "Error i2c address not specified\n");
> + return -EINVAL;
> + }
> +
> + client->addr = (reg & REG_ADDR_MASK) >> REG_ADDR_SHIFT;
> + ret = i2c_smbus_write_byte_data(client, reg & REG_OFFSET_MASK, val);
> + client->addr = orig_addr;
> +
> + return ret;
> +}
> +
> +static const struct regmap_config cht_wc_regmap_cfg = {
> + .reg_bits = 16,
> + .val_bits = 8,
> + .reg_write = cht_wc_byte_reg_write,
> + .reg_read = cht_wc_byte_reg_read,
> +};
> +
> +static const struct regmap_irq cht_wc_regmap_irqs[] = {
> + REGMAP_IRQ_REG(CHT_WC_PWRSRC_IRQ, 0, BIT(CHT_WC_PWRSRC_IRQ)),
> + REGMAP_IRQ_REG(CHT_WC_THRM_IRQ, 0, BIT(CHT_WC_THRM_IRQ)),
> + REGMAP_IRQ_REG(CHT_WC_BCU_IRQ, 0, BIT(CHT_WC_BCU_IRQ)),
> + REGMAP_IRQ_REG(CHT_WC_ADC_IRQ, 0, BIT(CHT_WC_ADC_IRQ)),
> + REGMAP_IRQ_REG(CHT_WC_EXT_CHGR_IRQ, 0, BIT(CHT_WC_EXT_CHGR_IRQ)),
> + REGMAP_IRQ_REG(CHT_WC_GPIO_IRQ, 0, BIT(CHT_WC_GPIO_IRQ)),
> + REGMAP_IRQ_REG(CHT_WC_CRIT_IRQ, 0, BIT(CHT_WC_CRIT_IRQ)),
> +};
> +
> +static const struct regmap_irq_chip cht_wc_regmap_irq_chip = {
> + .name = "cht_wc_irq_chip",
> + .status_base = CHT_WC_IRQLVL1,
> + .mask_base = CHT_WC_IRQLVL1_MASK,
> + .irqs = cht_wc_regmap_irqs,
> + .num_irqs = ARRAY_SIZE(cht_wc_regmap_irqs),
> + .num_regs = 1,
> +};
> +
> +static int cht_wc_probe(struct i2c_client *client,
> + const struct i2c_device_id *i2c_id)
> +{
> + struct device *dev = &client->dev;
> + struct intel_soc_pmic *pmic;
> + acpi_status status;
> + unsigned long long hrv;
> + int ret;
> +
> + status = acpi_evaluate_integer(ACPI_HANDLE(dev), "_HRV", NULL, &hrv);
> + if (ACPI_FAILURE(status)) {
> + dev_err(dev, "Failed to get PMIC hardware revision\n");
> + return -ENODEV;
> + }
> + if (hrv != CHT_WC_HRV) {
> + dev_err(dev, "Invalid PMIC hardware revision: %llu\n", hrv);
> + return -ENODEV;
> + }
> + if (client->irq < 0) {
> + dev_err(dev, "Invalid IRQ\n");
> + return -ENODEV;
> + }
> +
> + pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
> + if (!pmic)
> + return -ENOMEM;
> +
> + pmic->irq = client->irq;
> + pmic->dev = dev;
> + i2c_set_clientdata(client, pmic);
> +
> + pmic->regmap = devm_regmap_init(dev, NULL, client, &cht_wc_regmap_cfg);
> + if (IS_ERR(pmic->regmap))
> + return PTR_ERR(pmic->regmap);
> +
> + ret = devm_regmap_add_irq_chip(dev, pmic->regmap, pmic->irq,
> + IRQF_ONESHOT | IRQF_SHARED, 0,
> + &cht_wc_regmap_irq_chip,
> + &pmic->irq_chip_data);
> + if (ret)
> + return ret;
> +
> + return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> + cht_wc_dev, ARRAY_SIZE(cht_wc_dev), NULL, 0,
> + regmap_irq_get_domain(pmic->irq_chip_data));
> +}
> +
> +static void cht_wc_shutdown(struct i2c_client *client)
> +{
> + struct intel_soc_pmic *pmic = i2c_get_clientdata(client);
> +
> + disable_irq(pmic->irq);
> +}
> +
> +static int __maybe_unused cht_wc_suspend(struct device *dev)
> +{
> + struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
> +
> + disable_irq(pmic->irq);
> + return 0;
> +}
> +
> +static int __maybe_unused cht_wc_resume(struct device *dev)
> +{
> + struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
> +
> + enable_irq(pmic->irq);
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(cht_wc_pm_ops, cht_wc_suspend, cht_wc_resume);
> +
> +static const struct i2c_device_id cht_wc_i2c_id[] = {
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, cht_wc_i2c_id);
> +
> +static const struct acpi_device_id cht_wc_acpi_ids[] = {
> + { "INT34D3", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, cht_wc_acpi_ids);
> +
> +static struct i2c_driver cht_wc_driver = {
> + .driver = {
> + .name = "CHT Whiskey Cove PMIC",
> + .pm = &cht_wc_pm_ops,
> + .acpi_match_table = ACPI_PTR(cht_wc_acpi_ids),
> + },
> + .probe = cht_wc_probe,
> + .shutdown = cht_wc_shutdown,
> + .id_table = cht_wc_i2c_id,
> +};
> +
> +module_i2c_driver(cht_wc_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Hans de Goede <hdego...@redhat.com>");
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
