The patchset will add a driver to support basic functionality for
XRA1403 device. Features supported:
- configure gpin as input/out
- get/set gpio status
Documentation: A gpio-xra1403.txt file was added to document the DTS
bindings related to driver.
Testing:
1. XRA1403 connected to iMX53 MCU
2. Export gpio from userspace
3. Verify that corresponding gpio directories are created
in `/sys/class/gpio/gpioXX`
4. Export gpios from first and second bank as output
5. Set the output gpio pin to high/low and verify with the
oscilloscope that gpio status is according with the configured
value.
Nandor Han (3):
gpio - Add EXAR XRA1403 SPI GPIO expander driver
doc,dts - add XRA1403 DTS binding documentation
Add XRA1403 support to MAINTAINERS file
.../devicetree/bindings/gpio/gpio-xra1403.txt | 37 +++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 8 +
drivers/gpio/Kconfig | 5 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-xra1403.c | 252 +++++++++++++++++++++
6 files changed, 304 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-xra1403.txt
create mode 100644 drivers/gpio/gpio-xra1403.c
--
2.10.1
