Hi everyone
This patch series was originally submitted by Andrew Lunn but got
stalled. I picked up the series and addressed what was discussed for
the earlier submission with some helpful input from Andrew. Hopefully
this time support for the PWM fan as found on Linksys WRT1900AC (Mamba)
will make it in.
Implementing as an MFD was discarded due to backward compatibility. The
original discussion can be read at [1].
This series depends on two cleanup series. The first series [2] ("gpio:
mvebu: preparatory cleanup for pwm-fan support") is in linux
next-20170320. The second one [3] ("gpio: mvebu: use BIT macro instead
of bit shifting") is in linux-20170327.
Ralph
[1] https://patchwork.ozlabs.org/patch/427287/
[2] https://lkml.org/lkml/2017/3/16/62
[3] https://lkml.org/lkml/2017/3/17/493
---
Notes:
About npwm = 1:
The only way I can think of to achieve that requires reading the
GPIO line from the device tree. This would prevent a user to
dynamically choose a line. Which is fine for the fan found on Mamba
but let's take some development board with freely accessible GPIOs
and suddenly we limit the use of this driver. Given the above, npwm
= ngpio with only one usable at a time is a more accurate
description of the situation. The only downside is some "wasted"
space.
About the new compatible string:
Orion was chosen for the SoC variant for the same reason as in
commit 5f79c651e81e ("arm: mvebu: use global interrupts for GPIOs on
Armada XP"). I decided having the first two chips be
"marvell,armada-370-xp-gpio" and keep "marvell,orion-gpio" for the
third one for some SoCs just to be able to require the PWM property
for this compatible string. Therefore the properties remain
optional and if defined for any other than the first two chips it's
an error.
---
Pending:
* npwm = 1? I vote no if that counts. ;) (suggested by Thierry Reding)
* Tested-by: Andrew Lunn for v1 needs renewing
* Needs ACK from Thierry Reding to be merged via linux-gpio tree by Linus
Walleij. (fine with the general approach, requested changes which
should have been taken care of now)
---
Changes v3->v4:
Patch 1/4 gpio: mvebu: Add limited PWM support:
* braces for both branches in if statement if one needs it. (suggested
by Andrew Lunn)
* introduce compatible string marvell,armada-370-xp-gpio (suggest by
Thierry Reding)
* fix mvebu_pwmreg_blink_on_duration -> mvebu_pwmreg_blink_off_duration
for period callculation in mvebu_pwm_get_state()
Patch 4/4 mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan
* Drop flags from pwms for Mamba, as no longer used (suggested by
Andrew Lunn)
* Use again #pwm-cell = 2, the second cell is actually the period.
Changes v2->v3:
Patch 1/4 gpio: mvebu: Add limited PWM support:
* drop pin from mvebu_pwn, can be infered (suggested by Thierry Reding)
* rename pwm to mvpwm so pwm can be used for pwm_device as in the API,
avoids some mental gymnastic.
* drop id from struct mvebu_gpio_chip, select blink counter in
mvebu_pwm_probe for all lines instead. We do not care about the
unused ones. I think a clear improvement in readability.
Makes coming up with a good comment simple as well.
* Switch to new atomic PWM API (suggested by Thierry Reding)
* rename use mvebu_gpioreg_blink_select to
mvebu_gpioreg_blink_counter_select.
* mark *_suspend() / *_resume() as __maybe_unused (suggested by Linus
Walleij)
* document #pwm-cells = 1 (suggested by Thierry Reding)
Patch 2/4 mvebu: xp: Add PWM properties to .dtsi files
* add missing reg-names / #pwm-cell properties to
armada-xp-mv78260.dtsi gpio1 node
* set pwm-cells = 1 (suggested by Thierry Reding)
All:
* always uppercase GPIO/PWM in prose (suggested by Thierry Reding)
Changes v1 -> v2:
Patch 1/4 gpio: mvebu: Add limited PWM support:
* use BIT macro (suggested by Linus Walleij)
* move id from struct mvebu_pwm to struct mvebu_gpio_chip, implement
blink select as if else and comment on the chip id for code clarity
(to accommodate Linus Walleijs request for a code clarification /
comment. If you can word it better I'm all ears.)
* Move function comment mvebu_pwm_probe into the function itself.
---
Andrew Lunn (4):
gpio: mvebu: Add limited PWM support
mvebu: xp: Add PWM properties to .dtsi files
ARM: mvebu: Enable SENSORS_PWM_FAN in defconfig
mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan
.../devicetree/bindings/gpio/gpio-mvebu.txt | 32 ++
MAINTAINERS | 2 +
arch/arm/boot/dts/armada-370.dtsi | 16 +-
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 +-
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 14 +-
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 16 +-
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 16 +-
arch/arm/configs/mvebu_v7_defconfig | 2 +
drivers/gpio/gpio-mvebu.c | 324 ++++++++++++++++++++-
9 files changed, 394 insertions(+), 36 deletions(-)
--
2.10.2
