Hi Ralph,
 
 On lun., mars 27 2017, Ralph Sennhauser <ralph.sennhau...@gmail.com> wrote:

The title should start by ARM: dts: mvebu:

If there is no need to have a v5 then I wil take care of modifying the
title while applying it.


> From: Andrew Lunn <and...@lunn.ch>
>
> Add properties to the GPIO nodes to allow them to be also used as PWM
> lines.
>
> Signed-off-by: Andrew Lunn <and...@lunn.ch>
> URL: https://patchwork.ozlabs.org/patch/427294/
> [Ralph Sennhauser:
>   * Use new compatible string marvell,armada-370-xp-gpio
>   * Add missing reg-names / #pwm-cell properties to armada-xp-mv78260.dtsi
>     'gpio1' node]
> Signed-off-by: Ralph Sennhauser <ralph.sennhau...@gmail.com>
> ---
>  arch/arm/boot/dts/armada-370.dtsi        | 16 +++++++++++-----
>  arch/arm/boot/dts/armada-xp-mv78230.dtsi | 14 ++++++++++----
>  arch/arm/boot/dts/armada-xp-mv78260.dtsi | 16 +++++++++++-----
>  arch/arm/boot/dts/armada-xp-mv78460.dtsi | 16 +++++++++++-----
>  4 files changed, 43 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-370.dtsi 
> b/arch/arm/boot/dts/armada-370.dtsi
> index cc011c8..e30b076 100644
> --- a/arch/arm/boot/dts/armada-370.dtsi
> +++ b/arch/arm/boot/dts/armada-370.dtsi
> @@ -137,29 +137,35 @@
>                       };
>  
>                       gpio0: gpio@18100 {
> -                             compatible = "marvell,orion-gpio";
> -                             reg = <0x18100 0x40>;
> +                             compatible = "marvell,armada-370-xp-gpio";

I think we should keep the "marvell,orion-gpio" too because the hardware
is still compatible with it. Morever it will allow to use a recent dtb
with an old kernel.


> +                             reg = <0x18100 0x40>, <0x181c0 0x08>;
> +                             reg-names = "gpio", "pwm";
>                               ngpios = <32>;
>                               gpio-controller;
>                               #gpio-cells = <2>;
> +                             #pwm-cells = <2>;
>                               interrupt-controller;
>                               #interrupt-cells = <2>;
>                               interrupts = <82>, <83>, <84>, <85>;
> +                             clocks = <&coreclk 0>;
>                       };
>  
>                       gpio1: gpio@18140 {
> -                             compatible = "marvell,orion-gpio";
> -                             reg = <0x18140 0x40>;
> +                             compatible = "marvell,armada-370-xp-gpio";

Same here and for all the others...

Thanks,

Gregory

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Reply via email to