On Fri, Mar 31, 2017 at 01:45:04PM +0200, Fabrice Gasnier wrote:
> Document STMicroelectronics STM32 DAC (digital-to-analog converter).
>
> Signed-off-by: Fabrice Gasnier <[email protected]>
> ---
> .../devicetree/bindings/iio/dac/st,stm32-dac.txt | 56
> ++++++++++++++++++++++
> 1 file changed, 56 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
> b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
> new file mode 100644
> index 0000000..1981983
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
> @@ -0,0 +1,56 @@
> +STMicroelectronics STM32 DAC
> +
> +The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
> +can be configured in 8- or 12-bit mode. In 12-bit mode, the data could be
> +left- or right-aligned. It has two output channels, each with its own
> converter.
> +It has built-in noise and triangle waveform generator and supports external
> +triggers for conversions. The DAC's output buffer allows a high drive output
> +current.
> +
> +Contents of a stm32 dac root node:
> +-----------------------------------
> +Required properties:
> +- compatible: Must be "st,stm32h7-dac-core".
> +- reg: Offset and length of the device's register set.
> +- clocks: Must contain an entry for pclk (which feeds the peripheral bus
> + interface)
> +- clock-names: Must be "pclk".
> +- vref-supply: Phandle to the vref+ input analog reference supply.
> +
> +Optional properties:
> +- resets: Must contain the phandle to the reset controller.
> +- A pinctrl state named "default" for each DAC channel may be defined to set
> + DAC_OUTx pin in mode of operation for analog output on external pin.
> +
> +Contents of a stm32 dac child node:
> +-----------------------------------
> +DAC core node should contain at least one subnode, representing a
> +DAC instance/channel available on the machine.
> +
> +Required properties:
> +- compatible: Must be "st,stm32-dac".
> +- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
> + Documentation/devicetree/bindings/iio/iio-bindings.txt
> +- st,dac-channel: Must be either 1 or 2, to define channel in use (e.g.
> + single channels: 1 or 2)
Use "reg" instead.
> +
> +Example:
> + dac: dac@40007400 {
> + compatible = "st,stm32h7-dac-core";
> + reg = <0x40007400 0x400>;
> + clocks = <&clk>;
> + clock-names = "pclk";
> + vref-supply = <®_vref>;
> +
> + dac1: dac@1 {
> + compatible = "st,stm32-dac";
> + #io-channels-cells = <1>;
> + st,dac-channel = <1>;
> + };
> +
> + dac2: dac@2 {
> + compatible = "st,stm32-dac";
> + #io-channels-cells = <1>;
> + st,dac-channel = <2>;
> + };
> + };
> --
> 1.9.1
>
