On 04/04/17 19:01, Tony Lindgren wrote: > * Roger Quadros <rog...@ti.com> [170330 05:37]: >> Hi Tony & Dave, >> >> On 13/03/17 15:42, Roger Quadros wrote: >>> Hi, >>> >>> This series adds ethernet support to am335x-icev2 board. >>> >>> The ethernet PHYs on the board need an explicit GPIO reset pulse >>> to ensure they bootstrap to the correct mode. Without the >>> GPIO reset they just don't work. >>> >>> cheers, >>> -roger >> >> Any comments on this series. Patch 1 is at version 2. > > I think you meant patch 2/3 is at version2. I've picked > patches 2 and 3 for v4.12 into dt and defconfig branches.
Thanks Tony. > > You may need to resend the davinci_mdio.c patch alone > for Dave as he usually won't pick individual patches I > think. OK, I'll send that one separately. cheers, -roger > > Regards, > > Tony > >>> Roger Quadros (2): >>> net: davinci_mdio: add GPIO reset logic >>> ARM: dts: am335x-icev2: Add CPSW ethernet0 and ethernet1 >>> >>> .../devicetree/bindings/net/davinci-mdio.txt | 2 + >>> arch/arm/boot/dts/am335x-icev2.dts | 113 >>> +++++++++++++++++++++ >>> drivers/net/ethernet/ti/davinci_mdio.c | 68 +++++++++++-- >>> 3 files changed, 175 insertions(+), 8 deletions(-) >>> >>
