This adds support for the GPIOs on Cirrus Logic Madera class codecs.
Signed-off-by: Nariman Poushin <nari...@opensource.wolfsonmicro.com>
Signed-off-by: Richard Fitzgerald <r...@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckee...@opensource.wolfsonmicro.com>
---
.../devicetree/bindings/gpio/gpio-madera.txt | 24 +++
MAINTAINERS | 2 +
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-madera.c | 173 +++++++++++++++++++++
5 files changed, 206 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-madera.txt
create mode 100644 drivers/gpio/gpio-madera.c
diff --git a/Documentation/devicetree/bindings/gpio/gpio-madera.txt
b/Documentation/devicetree/bindings/gpio/gpio-madera.txt
new file mode 100644
index 0000000..eb01c6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-madera.txt
@@ -0,0 +1,24 @@
+Cirrus Logic Madera class audio codecs gpio driver
+
+This is a subnode of the parent mfd node.
+
+See also the core bindings for the parent MFD driver:
+See Documentation/devicetree/bindings/mfd/madera.txt
+
+Required properties:
+ - compatible : must be "cirrus,madera-gpio"
+ - gpio-controller : Indicates this device is a GPIO controller.
+ - #gpio-cells : Must be 2. The first cell is the pin number. The second cell
+ is reserved for future use and must be zero
+
+Example:
+
+codec: cs47l85@0 {
+ compatible = "cirrus,cs47l85";
+
+ gpio {
+ compatible = "cirrus,madera-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ }
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 85af1f9..0183692 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3266,6 +3266,7 @@ L: patc...@opensource.wolfsonmicro.com
T: git https://github.com/CirrusLogic/linux-drivers.git
W: https://github.com/CirrusLogic/linux-drivers/wiki
S: Supported
+F: Documentation/devicetree/bindings/gpio/gpio-madera.txt
F: Documentation/devicetree/bindings/interrupt-controller/cirrus,madera.txt
F: Documentation/devicetree/bindings/mfd/madera.txt
F: Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
@@ -3273,6 +3274,7 @@ F:
Documentation/devicetree/bindings/regulator/madera*
F: include/linux/irqchip/irq-madera*
F: include/linux/mfd/madera/*
F: include/linux/regulator/madera*
+F: drivers/gpio/gpio-madera*
F: drivers/irqchip/irq-madera*
F: drivers/mfd/madera*
F: drivers/mfd/cs47l*
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 63ceed2..1386728 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -844,6 +844,12 @@ config GPIO_ARIZONA
help
Support for GPIOs on Wolfson Arizona class devices.
+config GPIO_MADERA
+ tristate "Cirrus Logic Madera class codecs"
+ depends on MFD_MADERA
+ help
+ Support for GPIOs on Cirrus Logic Madera class codecs.
+
config GPIO_CRYSTAL_COVE
tristate "GPIO support for Crystal Cove PMIC"
depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 095598e..d4b6c30 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_LP873X) += gpio-lp873x.o
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
+obj-$(CONFIG_GPIO_MADERA) += gpio-madera.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
diff --git a/drivers/gpio/gpio-madera.c b/drivers/gpio/gpio-madera.c
new file mode 100644
index 0000000..b4fa082
--- /dev/null
+++ b/drivers/gpio/gpio-madera.c
@@ -0,0 +1,173 @@
+/*
+ * gpio-madera.c - GPIO support for Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/madera/core.h>
+#include <linux/mfd/madera/pdata.h>
+#include <linux/mfd/madera/registers.h>
+
+struct madera_gpio {
+ struct madera *madera;
+ struct gpio_chip gpio_chip;
+};
+
+static int madera_gpio_direction_in(struct gpio_chip *chip, unsigned int
offset)
+{
+ struct madera_gpio *madera_gpio = gpiochip_get_data(chip);
+ struct madera *madera = madera_gpio->madera;
+
+ return regmap_update_bits(madera->regmap,
+ MADERA_GPIO1_CTRL_2 + (2 * offset),
+ MADERA_GP1_DIR_MASK, MADERA_GP1_DIR);
+}
+
+static int madera_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct madera_gpio *madera_gpio = gpiochip_get_data(chip);
+ struct madera *madera = madera_gpio->madera;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(madera->regmap,
+ MADERA_GPIO1_CTRL_1 + (2 * offset), &val);
+ if (ret < 0)
+ return ret;
+
+ if (val & MADERA_GP1_LVL_MASK)
+ return 1;
+ else
+ return 0;
+}
+
+static int madera_gpio_direction_out(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct madera_gpio *madera_gpio = gpiochip_get_data(chip);
+ struct madera *madera = madera_gpio->madera;
+ unsigned int regval;
+ int ret;
+
+ if (value)
+ regval = MADERA_GP1_LVL;
+ else
+ regval = 0;
+
+ ret = regmap_update_bits(madera->regmap,
+ MADERA_GPIO1_CTRL_2 + (2 * offset),
+ MADERA_GP1_DIR_MASK, 0);
+ if (ret < 0)
+ return ret;
+
+ return regmap_update_bits(madera->regmap,
+ MADERA_GPIO1_CTRL_1 + (2 * offset),
+ MADERA_GP1_LVL_MASK, regval);
+}
+
+static void madera_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ struct madera_gpio *madera_gpio = gpiochip_get_data(chip);
+ struct madera *madera = madera_gpio->madera;
+ unsigned int regval;
+ int ret;
+
+ if (value)
+ regval = MADERA_GP1_LVL;
+ else
+ regval = 0;
+
+ ret = regmap_update_bits(madera->regmap,
+ MADERA_GPIO1_CTRL_1 + (2 * offset),
+ MADERA_GP1_LVL_MASK, regval);
+ if (ret)
+ dev_warn(madera->dev, "Failed to write to 0x%x (%d)\n",
+ MADERA_GPIO1_CTRL_1 + (2 * offset), ret);
+}
+
+static struct gpio_chip template_chip = {
+ .label = "madera",
+ .owner = THIS_MODULE,
+ .direction_input = madera_gpio_direction_in,
+ .get = madera_gpio_get,
+ .direction_output = madera_gpio_direction_out,
+ .set = madera_gpio_set,
+ .can_sleep = true,
+};
+
+static int madera_gpio_probe(struct platform_device *pdev)
+{
+ struct madera *madera = dev_get_drvdata(pdev->dev.parent);
+ struct madera_pdata *pdata = dev_get_platdata(madera->dev);
+ struct madera_gpio *madera_gpio;
+ int ret;
+
+ madera_gpio = devm_kzalloc(&pdev->dev, sizeof(*madera_gpio),
+ GFP_KERNEL);
+ if (!madera_gpio)
+ return -ENOMEM;
+
+ madera_gpio->madera = madera;
+ madera_gpio->gpio_chip = template_chip;
+ madera_gpio->gpio_chip.parent = &pdev->dev;
+
+ if (IS_ENABLED(CONFIG_OF_GPIO))
+ madera_gpio->gpio_chip.of_node = pdev->dev.of_node;
+
+ switch (madera->type) {
+ case CS47L35:
+ madera_gpio->gpio_chip.ngpio = CS47L35_NUM_GPIOS;
+ break;
+ case CS47L85:
+ case WM1840:
+ madera_gpio->gpio_chip.ngpio = CS47L85_NUM_GPIOS;
+ break;
+ case CS47L90:
+ case CS47L91:
+ madera_gpio->gpio_chip.ngpio = CS47L90_NUM_GPIOS;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unknown chip variant %d\n",
+ madera->type);
+ return -EINVAL;
+ }
+
+ if (pdata && pdata->gpio_base)
+ madera_gpio->gpio_chip.base = pdata->gpio_base;
+ else
+ madera_gpio->gpio_chip.base = -1;
+
+ ret = devm_gpiochip_add_data(&pdev->dev, &madera_gpio->gpio_chip,
+ madera_gpio);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct platform_driver madera_gpio_driver = {
+ .driver.name = "madera-gpio",
+ .driver.owner = THIS_MODULE,
+ .probe = madera_gpio_probe,
+};
+
+module_platform_driver(madera_gpio_driver);
+
+MODULE_DESCRIPTION("GPIO interface for Madera codecs");
+MODULE_AUTHOR("Nariman Poushin <nari...@opensource.wolfsonmicro.com>");
+MODULE_AUTHOR("Richard Fitzgerald <r...@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:madera-gpio");
--
1.9.1
