On Fri, Apr 07, 2017 at 01:38:44PM +0100, Charles Keepax wrote: > The Arizona devices only maintain the state of output GPIOs whilst the > CODEC is active, this can cause issues if the CODEC suspends whilst > something is relying on the state of one of its GPIOs. However, in > many systems the CODEC GPIOs are used for audio related features > and thus the state of the GPIOs is unimportant whilst the CODEC is > suspended. Often keeping the CODEC resumed in such a system would > incur a power impact that is unacceptable. > > Add a flag through the second cell of the GPIO specifier in device > tree, to allow the user to select whether a GPIO being configured as > an output should keep the CODEC resumed.
If the whole codec can't be suspended, why does this need to be per GPIO? You could just have a single boolean property. > > Signed-off-by: Charles Keepax <ckee...@opensource.wolfsonmicro.com> > --- > Documentation/devicetree/bindings/mfd/arizona.txt | 5 ++++- > include/dt-bindings/mfd/arizona.h | 3 +++ > 2 files changed, 7 insertions(+), 1 deletion(-)
