From: Will Drewry <w...@chromium.org>
Add a dm= kernel parameter modeled after the md= parameter from
do_mounts_md. It allows for device-mapper targets to be configured at
boot time for use early in the boot process (as the root device or
otherwise).
Signed-off-by: Will Drewry <w...@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balle...@collabora.com>
---
Documentation/admin-guide/kernel-parameters.rst | 1 +
Documentation/admin-guide/kernel-parameters.txt | 3 +
Documentation/device-mapper/boot.txt | 42 +++
init/Makefile | 1 +
init/do_mounts.c | 1 +
init/do_mounts.h | 10 +
init/do_mounts_dm.c | 478 ++++++++++++++++++++++++
7 files changed, 536 insertions(+)
create mode 100644 Documentation/device-mapper/boot.txt
create mode 100644 init/do_mounts_dm.c
diff --git a/Documentation/admin-guide/kernel-parameters.rst
b/Documentation/admin-guide/kernel-parameters.rst
index b516164..ecb58d6 100644
--- a/Documentation/admin-guide/kernel-parameters.rst
+++ b/Documentation/admin-guide/kernel-parameters.rst
@@ -91,6 +91,7 @@ parameter is applicable::
BLACKFIN Blackfin architecture is enabled.
CLK Common clock infrastructure is enabled.
CMA Contiguous Memory Area support is enabled.
+ DM Device mapper support is enabled.
DRM Direct Rendering Management support is enabled.
DYNAMIC_DEBUG Build in debug messages and enable them at runtime
EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
diff --git a/Documentation/admin-guide/kernel-parameters.txt
b/Documentation/admin-guide/kernel-parameters.txt
index 2ba45ca..686453d 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -830,6 +830,9 @@
dis_ucode_ldr [X86] Disable the microcode loader.
+ dm= [DM] Allows early creation of a device-mapper device.
+ See Documentation/device-mapper/boot.txt.
+
dma_debug=off If the kernel is compiled with DMA_API_DEBUG support,
this option disables the debugging code at boot.
diff --git a/Documentation/device-mapper/boot.txt
b/Documentation/device-mapper/boot.txt
new file mode 100644
index 0000000..76ea6ac
--- /dev/null
+++ b/Documentation/device-mapper/boot.txt
@@ -0,0 +1,42 @@
+Boot time creation of mapped devices
+===================================
+
+It is possible to configure a device mapper device to act as the root
+device for your system in two ways.
+
+The first is to build an initial ramdisk which boots to a minimal
+userspace which configures the device, then pivot_root(8) in to it.
+
+For simple device mapper configurations, it is possible to boot directly
+using the following kernel command line:
+
+dm="<name> <uuid> <ro>,table line 1,...,table line n"
+
+name = the name to associate with the device
+ after boot, udev, if used, will use that name to label
+ the device node.
+uuid = may be 'none' or the UUID desired for the device.
+ro = may be 'ro' or 'rw'. If 'ro', the device and device table will be
+ marked read-only.
+
+Each table line may be as normal when using the dmsetup tool except for
+two variations:
+1. Any use of commas will be interpreted as a newline
+2. Quotation marks cannot be escaped and cannot be used without
+ terminating the dm= argument.
+
+Unless renamed by udev, the device node created will be dm-0 as the
+first minor number for the device-mapper is used during early creation.
+
+Example
+=======
+
+- Booting to a linear array made up of user-mode linux block devices:
+
+ dm="lroot none 0, 0 4096 linear 98:16 0, 4096 4096 linear 98:32 0" \
+ root=/dev/dm-0
+
+Will boot to a rw dm-linear target of 8192 sectors split across two
+block devices identified by their major:minor numbers. After boot, udev
+will rename this target to /dev/mapper/lroot (depending on the rules).
+No uuid was assigned.
diff --git a/init/Makefile b/init/Makefile
index c4fb455..30424d7 100644
--- a/init/Makefile
+++ b/init/Makefile
@@ -20,6 +20,7 @@ mounts-y := do_mounts.o
mounts-$(CONFIG_BLK_DEV_RAM) += do_mounts_rd.o
mounts-$(CONFIG_BLK_DEV_INITRD) += do_mounts_initrd.o
mounts-$(CONFIG_BLK_DEV_MD) += do_mounts_md.o
+mounts-$(CONFIG_BLK_DEV_DM) += do_mounts_dm.o
# dependencies on generated files need to be listed explicitly
$(obj)/version.o: include/generated/compile.h
diff --git a/init/do_mounts.c b/init/do_mounts.c
index c2de510..8b9182b 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -566,6 +566,7 @@ void __init prepare_namespace(void)
wait_for_device_probe();
md_run_setup();
+ dm_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
diff --git a/init/do_mounts.h b/init/do_mounts.h
index 067af1d..ecb2757 100644
--- a/init/do_mounts.h
+++ b/init/do_mounts.h
@@ -74,3 +74,13 @@ void md_run_setup(void);
static inline void md_run_setup(void) {}
#endif
+
+#ifdef CONFIG_BLK_DEV_DM
+
+void dm_run_setup(void);
+
+#else
+
+static inline void dm_run_setup(void) {}
+
+#endif
diff --git a/init/do_mounts_dm.c b/init/do_mounts_dm.c
new file mode 100644
index 0000000..54c3299
--- /dev/null
+++ b/init/do_mounts_dm.c
@@ -0,0 +1,478 @@
+/* do_mounts_dm.c
+ * Copyright (C) 2010 The Chromium OS Authors <chromium-os-...@chromium.org>
+ * All Rights Reserved.
+ * Based on do_mounts_md.c
+ *
+ * This file is released under the GPL.
+ */
+#include <linux/async.h>
+#include <linux/ctype.h>
+#include <linux/device-mapper.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+
+#include "do_mounts.h"
+
+#define DM_MAX_DEVICES 256
+#define DM_MAX_TARGETS 256
+#define DM_MAX_NAME 32
+#define DM_MAX_UUID 129
+#define DM_NO_UUID "none"
+
+#define DM_MSG_PREFIX "init"
+
+/* Separators used for parsing the dm= argument. */
+#define DM_FIELD_SEP " "
+#define DM_LINE_SEP ","
+#define DM_ANY_SEP DM_FIELD_SEP DM_LINE_SEP
+
+/*
+ * When the device-mapper and any targets are compiled into the kernel
+ * (not a module), one or more device-mappers may be created and used
+ * as the root device at boot time with the parameters given with the
+ * boot line dm=...
+ *
+ * Multiple device-mappers can be stacked specifying the number of
+ * devices. A device can have multiple targets if the the number of
+ * targets is specified.
+ *
+ * In the future, the <num> field will be mandatory.
+ *
+ * <device> ::= [<num>] <device-mapper>+
+ * <device-mapper> ::= <head> "," <target>+
+ * <head> ::= <name> <uuid> <mode> [<num>]
+ * <target> ::= <start> <length> <type> <options> ","
+ * <mode> ::= "ro" | "rw"
+ * <uuid> ::= xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx | "none"
+ * <type> ::= "verity" | "bootcache" | ...
+ *
+ * Example:
+ * 2 vboot none ro 1,
+ * 0 1768000 bootcache
+ * device=aa55b119-2a47-8c45-946a-5ac57765011f+1
+ * signature=76e9be054b15884a9fa85973e9cb274c93afadb6
+ * cache_start=1768000 max_blocks=100000 size_limit=23 max_trace=20000,
+ * vroot none ro 1,
+ * 0 1740800 verity payload=254:0 hashtree=254:0 hashstart=1740800 alg=sha1
+ * root_hexdigest=76e9be054b15884a9fa85973e9cb274c93afadb6
+ * salt=5b3549d54d6c7a3837b9b81ed72e49463a64c03680c47835bef94d768e5646fe
+ *
+ * Notes:
+ * 1. uuid is a label for the device and we set it to "none".
+ * 2. The <num> field will be optional initially and assumed to be 1.
+ * Once all the scripts that set these fields have been set, it will
+ * be made mandatory.
+ */
+
+struct dm_setup_target {
+ sector_t begin;
+ sector_t length;
+ char *type;
+ char *params;
+ /* simple singly linked list */
+ struct dm_setup_target *next;
+};
+
+struct dm_device {
+ int minor;
+ int ro;
+ char name[DM_MAX_NAME];
+ char uuid[DM_MAX_UUID];
+ unsigned long num_targets;
+ struct dm_setup_target *target;
+ int target_count;
+ struct dm_device *next;
+};
+
+struct dm_option {
+ char *start;
+ char *next;
+ size_t len;
+ char delim;
+};
+
+static struct {
+ unsigned long num_devices;
+ char *str;
+} dm_setup_args __initdata;
+
+static int __initdata dm_early_setup;
+
+static int __init get_dm_option(struct dm_option *opt, const char *accept)
+{
+ char *str = opt->next;
+ char *endp;
+
+ if (!str)
+ return 0;
+
+ str = skip_spaces(str);
+ opt->start = str;
+ endp = strpbrk(str, accept);
+ if (!endp) { /* act like strchrnul */
+ opt->len = strlen(str);
+ endp = str + opt->len;
+ } else {
+ opt->len = endp - str;
+ }
+ opt->delim = *endp;
+ if (*endp == 0) {
+ /* Don't advance past the nul. */
+ opt->next = endp;
+ } else {
+ opt->next = endp + 1;
+ }
+ return opt->len != 0;
+}
+
+static int __init dm_setup_cleanup(struct dm_device *devices)
+{
+ struct dm_device *dev = devices;
+
+ while (dev) {
+ struct dm_device *old_dev = dev;
+ struct dm_setup_target *target = dev->target;
+
+ while (target) {
+ struct dm_setup_target *old_target = target;
+
+ kfree(target->type);
+ kfree(target->params);
+ target = target->next;
+ kfree(old_target);
+ dev->target_count--;
+ }
+ BUG_ON(dev->target_count);
+ dev = dev->next;
+ kfree(old_dev);
+ }
+ return 0;
+}
+
+static char * __init dm_parse_device(struct dm_device *dev, char *str)
+{
+ struct dm_option opt;
+ size_t len;
+
+ /* Grab the logical name of the device to be exported to udev */
+ opt.next = str;
+ if (!get_dm_option(&opt, DM_FIELD_SEP)) {
+ DMERR("failed to parse device name");
+ goto parse_fail;
+ }
+ len = min(opt.len + 1, sizeof(dev->name));
+ strlcpy(dev->name, opt.start, len); /* includes nul */
+
+ /* Grab the UUID value or "none" */
+ if (!get_dm_option(&opt, DM_FIELD_SEP)) {
+ DMERR("failed to parse device uuid");
+ goto parse_fail;
+ }
+ len = min(opt.len + 1, sizeof(dev->uuid));
+ strlcpy(dev->uuid, opt.start, len);
+
+ /* Determine if the table/device will be read only or read-write */
+ get_dm_option(&opt, DM_ANY_SEP);
+ if (!strncmp("ro", opt.start, opt.len)) {
+ dev->ro = 1;
+ } else if (!strncmp("rw", opt.start, opt.len)) {
+ dev->ro = 0;
+ } else {
+ DMERR("failed to parse table mode");
+ goto parse_fail;
+ }
+
+ /* Optional number field */
+ if (opt.delim == DM_FIELD_SEP[0]) {
+ if (!get_dm_option(&opt, DM_LINE_SEP))
+ return NULL;
+ if (kstrtoul(opt.start, 10, &dev->num_targets))
+ dev->num_targets = 1;
+ } else {
+ dev->num_targets = 1;
+ }
+ if (dev->num_targets > DM_MAX_TARGETS) {
+ DMERR("too many targets %lu > %d",
+ dev->num_targets, DM_MAX_TARGETS);
+ }
+ return opt.next;
+
+parse_fail:
+ return NULL;
+}
+
+static char * __init dm_parse_targets(struct dm_device *dev, char *str)
+{
+ struct dm_option opt;
+ struct dm_setup_target **target = &dev->target;
+ unsigned long num_targets = dev->num_targets;
+ unsigned long i;
+
+ /* Targets are defined as per the table format but with a
+ * comma as a newline separator.
+ */
+ opt.next = str;
+ for (i = 0; i < num_targets; i++) {
+ *target = kzalloc(sizeof(*target), GFP_KERNEL);
+ if (!*target) {
+ DMERR("failed to allocate memory for target %s<%ld>",
+ dev->name, i);
+ goto parse_fail;
+ }
+ dev->target_count++;
+
+ if (!get_dm_option(&opt, DM_FIELD_SEP)) {
+ DMERR("failed to parse starting sector"
+ " for target %s<%ld>", dev->name, i);
+ goto parse_fail;
+ }
+
+ if (kstrtoull(opt.start, 10, &(*target)->begin))
+ goto parse_fail;
+
+ if (!get_dm_option(&opt, DM_FIELD_SEP)) {
+ DMERR("failed to parse length for target %s<%ld>",
+ dev->name, i);
+ goto parse_fail;
+ }
+
+ if (kstrtoull(opt.start, 10, &(*target)->length))
+ goto parse_fail;
+
+ if (get_dm_option(&opt, DM_FIELD_SEP))
+ (*target)->type = kstrndup(opt.start, opt.len,
+ GFP_KERNEL);
+ if (!((*target)->type)) {
+ DMERR("failed to parse type for target %s<%ld>",
+ dev->name, i);
+ goto parse_fail;
+ }
+ if (get_dm_option(&opt, DM_LINE_SEP))
+ (*target)->params = kstrndup(opt.start, opt.len,
+ GFP_KERNEL);
+ if (!((*target)->params)) {
+ DMERR("failed to parse params for target %s<%ld>",
+ dev->name, i);
+ goto parse_fail;
+ }
+ target = &((*target)->next);
+ }
+ DMDEBUG("parsed %d targets", dev->target_count);
+
+ return opt.next;
+
+parse_fail:
+ return NULL;
+}
+
+static struct dm_device * __init dm_parse_args(void)
+{
+ struct dm_device *devices = NULL;
+ struct dm_device **tail = &devices;
+ struct dm_device *dev;
+ char *str = dm_setup_args.str;
+ unsigned long num_devices = dm_setup_args.num_devices;
+ unsigned long i;
+
+ if (!str)
+ return NULL;
+ for (i = 0; i < num_devices; i++) {
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ DMERR("failed to allocated memory for dev");
+ goto error;
+ }
+ *tail = dev;
+ tail = &dev->next;
+ /*
+ * devices are given minor numbers 0 - n-1
+ * in the order they are found in the arg
+ * string.
+ */
+ dev->minor = i;
+ str = dm_parse_device(dev, str);
+ if (!str) /* NULL indicates error in parsing, bail */
+ goto error;
+
+ str = dm_parse_targets(dev, str);
+ if (!str)
+ goto error;
+ }
+ return devices;
+error:
+ dm_setup_cleanup(devices);
+ return NULL;
+}
+
+/*
+ * Parse the command-line parameters given our kernel, but do not
+ * actually try to invoke the DM device now; that is handled by
+ * dm_setup_drives after the low-level disk drivers have initialised.
+ * dm format is described at the top of the file.
+ *
+ * Because dm minor numbers are assigned in assending order starting with 0,
+ * You can assume the first device is /dev/dm-0, the next device is /dev/dm-1,
+ * and so forth.
+ */
+static int __init dm_setup(char *str)
+{
+ struct dm_option opt;
+ unsigned long num_devices;
+
+ if (!str) {
+ DMDEBUG("str is NULL");
+ goto parse_fail;
+ }
+ opt.next = str;
+ if (!get_dm_option(&opt, DM_FIELD_SEP))
+ goto parse_fail;
+ if (isdigit(opt.start[0])) { /* Optional number field */
+ if (kstrtoul(opt.start, 10, &num_devices))
+ num_devices = 1;
+ str = opt.next;
+ } else {
+ num_devices = 1;
+ /* Don't advance str */
+ }
+ if (num_devices > DM_MAX_DEVICES) {
+ DMDEBUG("too many devices %lu > %d",
+ num_devices, DM_MAX_DEVICES);
+ }
+ dm_setup_args.str = str;
+ dm_setup_args.num_devices = num_devices;
+ DMINFO("will configure %lu devices", num_devices);
+ dm_early_setup = 1;
+ return 1;
+
+parse_fail:
+ DMWARN("Invalid arguments supplied to dm=.");
+ return 0;
+}
+
+static void __init dm_setup_drives(void)
+{
+ struct mapped_device *md = NULL;
+ struct dm_table *table = NULL;
+ struct dm_setup_target *target;
+ struct dm_device *dev;
+ char *uuid;
+ fmode_t fmode = FMODE_READ;
+ struct dm_device *devices;
+
+ devices = dm_parse_args();
+
+ for (dev = devices; dev; dev = dev->next) {
+ if (dm_create(dev->minor, &md)) {
+ DMDEBUG("failed to create the device");
+ goto dm_create_fail;
+ }
+ DMDEBUG("created device '%s'", dm_device_name(md));
+
+ /*
+ * In addition to flagging the table below, the disk must be
+ * set explicitly ro/rw.
+ */
+ set_disk_ro(dm_disk(md), dev->ro);
+
+ if (!dev->ro)
+ fmode |= FMODE_WRITE;
+ if (dm_table_create(&table, fmode, dev->target_count, md)) {
+ DMDEBUG("failed to create the table");
+ goto dm_table_create_fail;
+ }
+
+ dm_lock_md_type(md);
+
+ for (target = dev->target; target; target = target->next) {
+ DMINFO("adding target '%llu %llu %s %s'",
+ (unsigned long long) target->begin,
+ (unsigned long long) target->length,
+ target->type, target->params);
+ if (dm_table_add_target(table, target->type,
+ target->begin,
+ target->length,
+ target->params)) {
+ DMDEBUG("failed to add the target"
+ " to the table");
+ goto add_target_fail;
+ }
+ }
+ if (dm_table_complete(table)) {
+ DMDEBUG("failed to complete the table");
+ goto table_complete_fail;
+ }
+
+ /* Suspend the device so that we can bind it to the table. */
+ if (dm_suspend(md, 0)) {
+ DMDEBUG("failed to suspend the device pre-bind");
+ goto suspend_fail;
+ }
+
+ /* Initial table load: acquire type of table. */
+ dm_set_md_type(md, dm_table_get_type(table));
+
+ /* Setup md->queue to reflect md's type. */
+ if (dm_setup_md_queue(md, table)) {
+ DMWARN("unable to set up device queue for new table.");
+ goto setup_md_queue_fail;
+ }
+
+ /*
+ * Bind the table to the device. This is the only way
+ * to associate md->map with the table and set the disk
+ * capacity directly.
+ */
+ if (dm_swap_table(md, table)) { /* should return NULL. */
+ DMDEBUG("failed to bind the device to the table");
+ goto table_bind_fail;
+ }
+
+ /* Finally, resume and the device should be ready. */
+ if (dm_resume(md)) {
+ DMDEBUG("failed to resume the device");
+ goto resume_fail;
+ }
+
+ /* Export the dm device via the ioctl interface */
+ if (!strcmp(DM_NO_UUID, dev->uuid))
+ uuid = NULL;
+ if (dm_ioctl_export(md, dev->name, uuid)) {
+ DMDEBUG("failed to export device with given"
+ " name and uuid");
+ goto export_fail;
+ }
+
+ dm_unlock_md_type(md);
+
+ DMINFO("dm-%d is ready", dev->minor);
+ }
+ dm_setup_cleanup(devices);
+ return;
+
+export_fail:
+resume_fail:
+table_bind_fail:
+setup_md_queue_fail:
+suspend_fail:
+table_complete_fail:
+add_target_fail:
+ dm_unlock_md_type(md);
+ dm_table_destroy(table);
+dm_table_create_fail:
+ dm_put(md);
+dm_create_fail:
+ DMWARN("starting dm-%d (%s) failed",
+ dev->minor, dev->name);
+ dm_setup_cleanup(devices);
+}
+
+__setup("dm=", dm_setup);
+
+void __init dm_run_setup(void)
+{
+ if (!dm_early_setup)
+ return;
+ DMINFO("attempting early device configuration.");
+ dm_setup_drives();
+}
--
2.9.3
