> -----Original Message----- > From: Dong Aisheng [mailto:[email protected]] > Sent: Friday, April 14, 2017 10:31 PM > To: [email protected] > Cc: A.S. Dong; Rob Herring; Mark Rutland; [email protected] > Subject: [PATCH v2 1/2] dt-binding: regulator: anatop: make regulator name > property required > > We actually can't allow the missing of the regualor name, thus update the > binding doc to make regulator-name property to be required. > > Cc: Rob Herring <[email protected]> > Cc: Mark Rutland <[email protected]> > Cc: [email protected] > Signed-off-by: Dong Aisheng <[email protected]>
Sorry, Mark, missed you about this one. Regards Dong Aisheng > --- > Documentation/devicetree/bindings/regulator/anatop-regulator.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/regulator/anatop- > regulator.txt b/Documentation/devicetree/bindings/regulator/anatop- > regulator.txt > index 1d58c8c..a3106c7 100644 > --- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt > +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt > @@ -2,6 +2,7 @@ Anatop Voltage regulators > > Required properties: > - compatible: Must be "fsl,anatop-regulator" > +- regulator-name: A string used as a descriptive name for regulator > +outputs > - anatop-reg-offset: Anatop MFD register offset > - anatop-vol-bit-shift: Bit shift for the register > - anatop-vol-bit-width: Number of bits used in the register > -- > 2.7.4
