On Tue, Apr 18, 2017 at 12:22 PM, Chen-Yu Tsai <w...@csie.org> wrote:
> The pinmux setting nodes all have an address element in their node
> names, however the pinctrl node does not have #address-cells.
>
> Rename the existing pinmux setting nodes and labels in sun8i-a83t.dtsi,
> dropping identifiers for functions that only have one possible setting,
> and using the pingroup name if the function is identically available on
> different pingroups.
>
> Signed-off-by: Chen-Yu Tsai <w...@csie.org>
> ---
> arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts | 2 +-
> arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 2 +-
> arch/arm/boot/dts/sun8i-a83t.dtsi | 10 +++++-----
> 3 files changed, 7 insertions(+), 7 deletions(-)
>
[...]
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi
> b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index 82cb87f21b96..87b99338716b 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -174,7 +174,7 @@
> #interrupt-cells = <3>;
> #gpio-cells = <3>;
>
> - mmc0_pins_a: mmc0@0 {
> + mmc0_pins: mmc0_pins {
> pins = "PF0", "PF1", "PF2",
> "PF3", "PF4", "PF5";
> function = "mmc0";
> @@ -182,13 +182,13 @@
> bias-pull-up;
> };
>
> - uart0_pins_a: uart0@0 {
> - pins = "PF2", "PF4";
> + uart0_pb_pins: uart0_pb_pins {
Duh... Forgot to use hyphens instead of underscores in the node names.
I'll send a patch for you to squash in.
ChenYu
> + pins = "PB9", "PB10";
> function = "uart0";
> };
>
> - uart0_pins_b: uart0@1 {
> - pins = "PB9", "PB10";
> + uart0_pf_pins: uart0_pf_pins {
> + pins = "PF2", "PF4";
> function = "uart0";
> };
> };
> --
> 2.11.0
>
