[PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2 boards

[Hoegeun Kwon]

The decon uses HW-TRIGGER, so TE interrupt is not necessary.
Therefore, remove the te-gpios property in the TM2 dts.

Signed-off-by: Hoegeun Kwon <hoegeun.k...@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts 
b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index 3ff9527..23191eb 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -60,7 +60,6 @@
                vci-supply = <&ldo28_reg>;
                reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
                enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
-               te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
        };
 };
 
-- 
1.9.1