[PATCH v2 07/30] arm: dts: mt7623: add pinctrl nodes to the mt7623 dtsi file

[sean.wang]

From: John Crispin <j...@phrozen.org>

Add pin controller node to the mt7623.dtsi file

Signed-off-by: John Crispin <j...@phrozen.org>
Signed-off-by: Sean Wang <sean.w...@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 3cc0a3a..1942bc7 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -15,7 +15,10 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/pinctrl/mt7623-pinfunc.h>
 #include <dt-bindings/power/mt2701-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/reset/mt2701-resets.h>
 #include "skeleton64.dtsi"
 
@@ -107,6 +110,26 @@
                #reset-cells = <1>;
        };
 
+       pio: pinctrl@10005000 {
+               compatible = "mediatek,mt7623-pinctrl",
+                            "mediatek,mt2701-pinctrl";
+               reg = <0 0x1000b000 0 0x1000>;
+               mediatek,pctl-regmap = <&syscfg_pctl_a>;
+               pins-are-numbered;
+               gpio-controller;
+               #gpio-cells = <2>;
+               interrupt-controller;
+               interrupt-parent = <&gic>;
+               #interrupt-cells = <2>;
+               interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+       };
+
+       syscfg_pctl_a: syscfg@10005000 {
+               compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
+               reg = <0 0x10005000 0 0x1000>;
+       };
+
        scpsys: scpsys@10006000 {
                compatible = "mediatek,mt7623-scpsys",
                             "mediatek,mt2701-scpsys",
-- 
1.9.1