[PATCH v2 20/20] ARM: sun5i: a10s-olinuxino: Enable HDMI

[Maxime Ripard]

The A10s Olinuxino has an HDMI connector. Make sure we can use it.

Acked-by: Chen-Yu Tsai <w...@csie.org>
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
 arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 29 +++++++++++++++++-
 1 file changed, 29 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts 
b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 894f874a5beb..1d13b6407222 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -63,6 +63,17 @@
                stdout-path = "serial0:115200n8";
        };
 
+       connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
                pinctrl-names = "default";
@@ -76,6 +87,10 @@
        };
 };
 
+&be0 {
+       status = "okay";
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -91,6 +106,16 @@
        status = "okay";
 };
 
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &i2c0 {
        pinctrl-names = "default";
        pinctrl-0 = <&i2c0_pins_a>;
@@ -248,6 +273,10 @@
        status = "okay";
 };
 
+&tcon0 {
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pins_a>;
-- 
git-series 0.8.11