The check for interrupt masking support is done by reading
the PCI_COMMAND config word
pci_read_config_word(dev, PCI_COMMAND, &orig);
then flipping the PCI_COMMAND_INTX_DISABLE bit and writing result back
pci_write_config_word(dev, PCI_COMMAND,
orig ^ PCI_COMMAND_INTX_DISABLE);
The expected result is that following read of the PCI_COMMAND
pci_read_config_word(dev, PCI_COMMAND, &new);
returns PCI_COMMAND with only PCI_COMMAND_INTX_DISABLE bit changed.
There are two possible outcomes:
1. Command is the same (hasn't changed)
2. Commmand has changed
And the second of them may be decoupled to:
2.1 Command changed only for PCI_COMMAND_INTX_DISABLE bit
(hasn't changed for bits different than
PCI_COMMAND_INTX_DISABLE)
2.2 Command changed for bit(s) different than
PCI_COMMAND_INTX_DISABLE bit
(and maybe for PCI_COMMAND_INTX_DISABLE too)
The 2.1 is expected result and anything else is error.
The 2.2 outcome is handled by pci_intx_mask_supported by printing
appropriate message to the log, but outcome 1 is not handled.
Log the message about command not being changed at all.
Signed-off-by: Piotr Gregor <piotrgre...@rsyncme.org>
---
drivers/pci/pci.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b01bd5b..67a611e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3712,7 +3712,7 @@ EXPORT_SYMBOL_GPL(pci_intx);
* pci_intx_mask_supported - probe for INTx masking support
* @dev: the PCI device to operate on
*
- * Check if the device dev support INTx masking via the config space
+ * Check if the device dev supports INTx masking via the config space
* command word.
*/
bool pci_intx_mask_supported(struct pci_dev *dev)
@@ -3736,11 +3736,21 @@ bool pci_intx_mask_supported(struct pci_dev *dev)
* go ahead and check it.
*/
if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) {
+ /*
+ * If anything else than PCI_COMMAND_INTX_DISABLE bit has
+ * changed (and maybe PCI_COMMAND_INTX_DISABLE too)
+ */
dev_err(&dev->dev, "Command register changed from 0x%x to 0x%x:
driver or hardware bug?\n",
orig, new);
} else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) {
+ /*
+ * OK. Only PCI_COMMAND_INTX_DISABLE bit has changed
+ */
mask_supported = true;
pci_write_config_word(dev, PCI_COMMAND, orig);
+ } else {
+ dev_err(&dev->dev, "Command register hasn't changed when
written from 0x%x to 0x%x: driver or hardware bug?\n",
+ orig, new);
}
pci_cfg_access_unlock(dev);
@@ -3798,7 +3808,7 @@ static bool pci_check_and_set_intx_mask(struct pci_dev
*dev, bool mask)
* @dev: the PCI device to operate on
*
* Check if the device dev has its INTx line asserted, mask it and
- * return true in that case. False is returned if not interrupt was
+ * return true in that case. False is returned if interrupt wasn't
* pending.
*/
bool pci_check_and_mask_intx(struct pci_dev *dev)
--
2.1.4
