This patch adds following improvements to Armada 8040 MachiatoBin: * Add 'chosen' node with stdout-path assignment * Enable 1G sgmii port * Enable SDHCI controllers on AP and CP HW blocks
Signed-off-by: Marcin Wojtas <[email protected]> --- arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 34 +++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index f7bb0cc..19d395b 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -51,6 +51,10 @@ compatible = "marvell,armada8040-mcbin", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@00000000 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; @@ -136,3 +140,33 @@ usb-phy = <&usb3h0_phy>; status = "okay"; }; + +&cpm_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cps_ethernet { + status = "okay"; +}; + +&cps_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; +}; + +&ap_sdhci0 { + status = "okay"; + bus-width = <8>; + no-1-8-v; + non-removable; +}; + +&cpm_sdhci0 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + non-removable; +}; -- 1.8.3.1
