The problem appears to be that the uart driver is not assigning the port. In uart_get() located in drivers/serial/serial_core.c the code tries to access state->port but it does not appear to exist. Where is the port supposed to get added/setup? Should this happen in the driver init or does the kernel add the ports to the driver after init?
Uart_get knows the correct driver name drv->driver_name = "PXA serial" and drv->dev_name = "ttyS", but the drv->state->port does not exist. Where should the port be added? The port info exists in drivers/serial/pxa.c but I cant find where its initialized. Any help would be great. Thanks, Tom -----Original Message----- From: young dave [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 03, 2007 6:54 PM To: Tom Strader Cc: linux-kernel@vger.kernel.org Subject: Re: Warning: unable to open an initial console. Hi; The errno "-6" is defined as: #define ENXIO 6 /* No such device or address*/ You can try to retrieve the rootfs and add the necessary device file to it, then reflash the rootfs. I'm Sorry, I have no embedded environment to test. Regards dave - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
