Hi Richard On Tue, 30 May 2017 14:28:47 +0200 Richard Genoud <richard.gen...@gmail.com> wrote:
> The blink counter A was always selected because 0 was forced in the > blink select counter register. > The variable 'set' was obviously there to be used as the register > value, selecting the B counter when id==1 and A counter when id==0. > > Tested on clearfog-pro (Marvell 88F6828) As stated in the other thread, testing on clearfog-pro is likely bogus, still the fix is correct. Reviewed-by: Ralph Sennhauser <ralph.sennhau...@gmail.com> Thanks Ralph > > Signed-off-by: Richard Genoud <richard.gen...@gmail.com> > --- > drivers/gpio/gpio-mvebu.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c > index 19a92efabbef..cdef2c78cb3b 100644 > --- a/drivers/gpio/gpio-mvebu.c > +++ b/drivers/gpio/gpio-mvebu.c > @@ -747,7 +747,7 @@ static int mvebu_pwm_probe(struct platform_device > *pdev, set = U32_MAX; > else > return -EINVAL; > - writel_relaxed(0, > mvebu_gpioreg_blink_counter_select(mvchip)); > + writel_relaxed(set, > mvebu_gpioreg_blink_counter_select(mvchip)); > mvpwm = devm_kzalloc(dev, sizeof(struct mvebu_pwm), > GFP_KERNEL); if (!mvpwm)
