Hi Alexandre,
On mar., mai 30 2017, Alexandre Belloni <alexandre.bell...@free-electrons.com>
wrote:
> As TCB2 doesn't have any output pins, use it as a clocksource.
>
In case you have not already applied it:
Acked-by: Gregory CLEMENT <gregory.clem...@free-electrons.com>
Thanks,
Gregory
> Cc: Gregory CLEMENT <gregory.clem...@free-electrons.com>
> Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
> ---
> arch/arm/boot/dts/at91-vinco.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91-vinco.dts
> b/arch/arm/boot/dts/at91-vinco.dts
> index e0c0b2897a49..d495a5e2aeac 100644
> --- a/arch/arm/boot/dts/at91-vinco.dts
> +++ b/arch/arm/boot/dts/at91-vinco.dts
> @@ -151,6 +151,18 @@
> status = "okay";
> };
>
> + tcb2: timer@fc024000 {
> + timer@0 {
> + compatible = "atmel,tcb-timer";
> + reg = <0>;
> + };
> +
> + timer@1 {
> + compatible = "atmel,tcb-timer";
> + reg = <1>;
> + };
> + };
> +
> macb1: ethernet@fc028000 {
> phy-mode = "rmii";
> status = "okay";
> --
> 2.11.0
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
