On Saturday, June 3, 2017 12:57:50 PM CEST Varadarajan Narayanan wrote: > +- function: > + Usage: required > + Value type: <string> > + Definition: Specify the alternative function to be configured for the > + specified pins. Functions are only valid for gpio pins. > + Valid values are: > + atest_char, atest_char0, atest_char1, atest_char2, > + atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync, > + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, > + audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c, > + blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart, > + blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2, > + blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, > blsp4_spi0, > + blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, > blsp5_spi, > + blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, > + cxc0, cxc1, dbg_out, gcc_plltest, gcc_tlmm, gpio, ldo_en, > + ldo_update, led0, led1, led2, mac0_sa0, mac0_sa1, > mac1_sa0, > + mac1_sa1, mac1_sa2, mac1_sa3, mac2_sa0, mac2_sa1, mdc, > + mdio, NA, pcie0_clk, pcie0_rst, pcie0_wake, pcie1_clk, > + pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, pcm_fsync, > + pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, pta1_1, > + pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3, > + qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, > + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, > + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, > + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, > + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, > + qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, > + qpic, rx0, rx1, rx2, sd_card, sd_write, tsens_max, wci2a, > + wci2b, wci2c, wci2d, NA
The "NA" function is listed twice. It should be there at all.
