Reviewed-by: Rick Altherr <ralth...@google.com>
On Sat, Jun 3, 2017 at 1:50 AM, Jonathan Cameron <ji...@kernel.org> wrote: > On Mon, 29 May 2017 13:12:12 +0530 > Arvind Yadav <arvind.yadav...@gmail.com> wrote: > >> clk_prepare_enable() can fail here and we must check its return value. >> >> Signed-off-by: Arvind Yadav <arvind.yadav...@gmail.com> > Please make sure to cc the driver author. This is a fairly new > driver, so chances are Rick will still be answering this email > address. > > Patch looks fine to me, but I would like to give Rick the opportunity > to respond. > > Jonathan >> --- >> drivers/iio/adc/aspeed_adc.c | 6 +++++- >> 1 file changed, 5 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c >> index 62670cb..e0ea411 100644 >> --- a/drivers/iio/adc/aspeed_adc.c >> +++ b/drivers/iio/adc/aspeed_adc.c >> @@ -212,7 +212,10 @@ static int aspeed_adc_probe(struct platform_device >> *pdev) >> } >> >> /* Start all channels in normal mode. */ >> - clk_prepare_enable(data->clk_scaler->clk); >> + ret = clk_prepare_enable(data->clk_scaler->clk); >> + if (ret) >> + goto clk_enable_error; >> + >> adc_engine_control_reg_val = GENMASK(31, 16) | >> ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE; >> writel(adc_engine_control_reg_val, >> @@ -236,6 +239,7 @@ static int aspeed_adc_probe(struct platform_device *pdev) >> writel(ASPEED_OPERATION_MODE_POWER_DOWN, >> data->base + ASPEED_REG_ENGINE_CONTROL); >> clk_disable_unprepare(data->clk_scaler->clk); >> +clk_enable_error: >> clk_hw_unregister_divider(data->clk_scaler); >> >> scaler_error: >