4.4-stable review patch. If anyone has any objections, please let me know.
------------------ From: Andrew Lunn <and...@lunn.ch> commit f2899788353c13891412b273fdff5f02d49aa40f upstream. The 88m1101 has an errata when configuring autoneg. However, it was being applied to many other Marvell PHYs as well. Limit its scope to just the 88m1101. Fixes: 76884679c644 ("phylib: Add support for Marvell 88e1111S and 88e1145") Reported-by: Daniel Walker <danie...@cisco.com> Signed-off-by: Andrew Lunn <and...@lunn.ch> Acked-by: Harini Katakam <hari...@xilinx.com> Reviewed-by: Florian Fainelli <f.faine...@gmail.com> Signed-off-by: David S. Miller <da...@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org> --- drivers/net/phy/marvell.c | 66 +++++++++++++++++++++++++--------------------- 1 file changed, 37 insertions(+), 29 deletions(-) --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -203,34 +203,6 @@ static int marvell_config_aneg(struct ph { int err; - /* The Marvell PHY has an errata which requires - * that certain registers get written in order - * to restart autonegotiation */ - err = phy_write(phydev, MII_BMCR, BMCR_RESET); - - if (err < 0) - return err; - - err = phy_write(phydev, 0x1d, 0x1f); - if (err < 0) - return err; - - err = phy_write(phydev, 0x1e, 0x200c); - if (err < 0) - return err; - - err = phy_write(phydev, 0x1d, 0x5); - if (err < 0) - return err; - - err = phy_write(phydev, 0x1e, 0); - if (err < 0) - return err; - - err = phy_write(phydev, 0x1e, 0x100); - if (err < 0) - return err; - err = marvell_set_polarity(phydev, phydev->mdix); if (err < 0) return err; @@ -264,6 +236,42 @@ static int marvell_config_aneg(struct ph return 0; } +static int m88e1101_config_aneg(struct phy_device *phydev) +{ + int err; + + /* This Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation + */ + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + + if (err < 0) + return err; + + err = phy_write(phydev, 0x1d, 0x1f); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1e, 0x200c); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1d, 0x5); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1e, 0); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1e, 0x100); + if (err < 0) + return err; + + return marvell_config_aneg(phydev); +} + #ifdef CONFIG_OF_MDIO /* * Set and/or override some configuration registers based on the @@ -993,7 +1001,7 @@ static struct phy_driver marvell_drivers .name = "Marvell 88E1101", .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, - .config_aneg = &marvell_config_aneg, + .config_aneg = &m88e1101_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr,