Hi Greg,

Please take these patches for FPGA that have been
reviewed on the mailing lists.

Thanks,
Alan

Anatolij Gustschin (1):
  fpga: Add flag to indicate SPI bitstream is bit-reversed

Joel Holdsworth (1):
  of: Add vendor prefix for Lattice Semiconductor

Joshua Clayton (5):
  doc: dt: document altera-passive-serial binding
  fpga manager: Add altera-ps-spi driver for Altera FPGAs
  ARM: dts: imx6q-evi: support altera-ps-spi
  lib: add bitrev8x4()
  fpga-manager: altera-ps-spi: use bitrev8x4

Moritz Fischer (1):
  dt-bindings: fpga: Add bindings document for Xilinx LogiCore PR
    Decoupler

Tobias Klauser (1):
  fpga: allow to compile-test Altera FPGA bridge drivers

Vincent Legoll (1):
  Make FPGA a menuconfig to ease disabling it all

 .../bindings/fpga/altera-passive-serial.txt        |  29 ++
 .../bindings/fpga/xilinx-pr-decoupler.txt          |  36 +++
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/imx6q-evi.dts                    |  16 ++
 drivers/fpga/Kconfig                               |  17 +-
 drivers/fpga/Makefile                              |   1 +
 drivers/fpga/altera-ps-spi.c                       | 308 +++++++++++++++++++++
 include/linux/bitrev.h                             |  19 ++
 include/linux/fpga/fpga-mgr.h                      |   2 +
 9 files changed, 422 insertions(+), 7 deletions(-)
 create mode 100644 
Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
 create mode 100644 
Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
 create mode 100644 drivers/fpga/altera-ps-spi.c

-- 
2.11.0

Reply via email to