[PATCH] thermal: imx: Handle return value of clk_prepare_enable

[Arvind Yadav]

clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav...@gmail.com>
---
 drivers/thermal/imx_thermal.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index fb648a4..1aee321 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -648,8 +648,11 @@ static int imx_thermal_resume(struct device *dev)
 {
        struct imx_thermal_data *data = dev_get_drvdata(dev);
        struct regmap *map = data->tempmon;
+       int ret;
 
-       clk_prepare_enable(data->thermal_clk);
+       ret = clk_prepare_enable(data->thermal_clk);
+       if (ret)
+               return ret;
        /* Enabled thermal sensor after resume */
        regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
        regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
-- 
1.9.1