On 10/06/17 02:12, Sebastian Reichel wrote:
This fixes the following error during kernel boot:

platform 480a5000.des: Cannot lookup hwmod 'des'

Unfortunately the DES module is only documented partly
in the OMAP4430 TRM. I found an old patch from Joel,
which I took over and updated for currently mainline.

Signed-off-by: Joel Fernandes <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
---
  arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 37 ++++++++++++++++++++++++++++++
  1 file changed, 37 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c 
b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 18feb49e813b..f2f13c678cfb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -993,6 +993,42 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__aes1 = 
{
  };
/*
+ * 'des' class for DES3DES module
+ */
+static struct omap_hwmod_class_sysconfig omap44xx_des_sysc = {
+       .rev_offs       = 0x30,
+       .sysc_offs      = 0x34,
+       .syss_offs      = 0x38,
+       .sysc_flags     = SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class omap44xx_des_hwmod_class = {
+       .name           = "des",
+       .sysc           = &omap44xx_des_sysc,
+};
+
+static struct omap_hwmod omap44xx_des_hwmod = {
+       .name           = "des",
+       .class          = &omap44xx_des_hwmod_class,
+       .clkdm_name     = "l4_secure_clkdm",
+       .main_clk       = "des_fck",

Change the above to l3_div_ck.

+       .prcm           = {
+               .omap4  = {
+                       .context_offs   = OMAP4_RM_L4SEC_DES3DES_CONTEXT_OFFSET,
+                       .clkctrl_offs   = OMAP4_CM_L4SEC_DES3DES_CLKCTRL_OFFSET,
+                       .modulemode     = MODULEMODE_SWCTRL,
+               },
+       },
+};
+
+struct omap_hwmod_ocp_if omap44xx_l4_per__des = {
+       .master         = &omap44xx_l4_per_hwmod,
+       .slave          = &omap44xx_des_hwmod,
+       .clk            = "des_fck",

l3_div_ck.

+       .user           = OCP_USER_MPU | OCP_USER_SDMA,
+};

l4_per is wrong interconnect for this module. It is actually connected to l3_main_2.

+
+/*
   * 'fdif' class
   * face detection hw accelerator module
   */
@@ -4834,6 +4870,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] 
__initdata = {
        &omap44xx_mpu__emif1,
        &omap44xx_mpu__emif2,
        &omap44xx_l3_main_2__aes1,
+       &omap44xx_l4_per__des,
        NULL,
  };

Reply via email to