On Fri, Apr 7, 2017 at 6:46 PM, Shawn Guo <[email protected]> wrote: > On Thu, Apr 06, 2017 at 11:32:07PM +0530, Jagan Teki wrote: >> From: Jagan Teki <[email protected]> >> >> Add support for Sound card and related codec(via i2c1) nodes >> on Engicam Is.IoT MX6UL variant module boards. >> >> Cc: Shawn Guo <[email protected]> >> Cc: Matteo Lisi <[email protected]> >> Cc: Michael Trimarchi <[email protected]> >> Signed-off-by: Jagan Teki <[email protected]> >> --- >> Changes for v3: >> - Replace fsl,imx-audio-sgtl5000 and use simple-audio-card >> Changes for v2: >> - Use proper [label:] node-name[@unit-address] for codec >> - Remove incorrect codec property 'wlf,shared-lrclk' >> - Remove 'gpr' from sound card node >> >> arch/arm/boot/dts/imx6ul-isiot-common.dtsi | 10 +++++++ >> arch/arm/boot/dts/imx6ul-isiot.dtsi | 44 >> ++++++++++++++++++++++++++++++ > > Can you help me understand how these two files are related? Why is > sgtl5000 added into one and sound node added into the other?
lcdif, ts and sound card which may differ based on the base-board connected with SOM, So I moved these stuff which are related to Starter kit supported once's and used with SOM dts files. if some other board with same SOM can have different lcdif and etc so they can define locally to dts. thanks! -- Jagan Teki Senior Linux Kernel Engineer | Amarula Solutions U-Boot, Linux | Upstream Maintainer Hyderabad, India.
