Hi Guodong,
On 2017/6/8 23:08, Guodong Xu wrote:
> From: Wang Xiaoyin <hw.wangxiao...@hisilicon.com>
>
> add device node for hi6421 pmic core and hi6421v530
> voltage regulator,include LDO(1,3,9,11,15,16)
>
> Signed-off-by: Wang Xiaoyin <hw.wangxiao...@hisilicon.com>
> Signed-off-by: Guodong Xu <guodong...@linaro.org>
> Acked-by: Arnd Bergmann <a...@arndb.de>
> ---
> arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 46
> +++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> index ca448f0..e579333 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> @@ -97,6 +97,52 @@
> default-state = "off";
> };
> };
> +
> + pmic: pmic@fff34000 {
> + compatible = "hisilicon,hi6421v530-pmic";
> + reg = <0x0 0xfff34000 0x0 0x1000>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + regulators {
> + ldo3: LDO3 { /* HDMI */
> + regulator-name = "VOUT3_1V85";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo9: LDO9 { /* SDCARD I/O */
> + regulator-name = "VOUT9_1V8_2V95";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> +
> + ldo11: LDO11 { /* Low Speed Connector */
> + regulator-name = "VOUT11_1V8_2V95";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> +
> + ldo15: LDO15 { /* UFS VCC */
> + regulator-name = "VOUT15_3V0";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo16: LDO16 { /* SD VDD */
> + regulator-name = "VOUT16_2V95";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <360>;
> + };
> + };
> + };
> };
>
> &i2c0 {
>
Since you put the dts part into another patch set[1] and the driver part has
been applied.
I will pick up [1].
Thanks!
[1]: https://lkml.org/lkml/2017/6/14/1052
BR,
Wei
