On 16/06/17 15:45, YT Shen wrote:
This adds basic chip support for Mediatek 2712
Signed-off-by: YT Shen <[email protected]>
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 32 ++++++
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 166 ++++++++++++++++++++++++++++
3 files changed, 199 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt2712-evb.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt2712e.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile
b/arch/arm64/boot/dts/mediatek/Makefile
index 9fbfd32..fcc0604 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
new file mode 100644
index 0000000..8c804df
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <[email protected]>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include "mt2712e.dtsi"
+
+/ {
+ model = "MediaTek MT2712 evaluation board";
+ compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
new file mode 100644
index 0000000..65cdd4a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -0,0 +1,166 @@
[...]
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ uart5: serial@1000f000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x1000f000 0 0x400>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
uart has two clocks, baud and bus clock. Please refer to the bindings
descrption for more information, that's what they are for.
Please define the two dummy clocks with the correct frequency and use them.
Regards,
Matthias
