From: Fabien Parent <fpar...@baylibre.com>
commit 43849785e1079f6606a31cb7fda92d1200849728 upstream.
Read access to the SPI flash are broken on da850-evm, i.e. the data
read is not what is actually programmed on the flash.
According to the datasheet for the M25P64 part present on the da850-evm,
if the SPI frequency is higher than 20MHz then the READ command is not
usable anymore and only the FAST_READ command can be used to read data.
This commit specifies in the DTS that we should use FAST_READ command
instead of the READ command.
Tested-by: Kevin Hilman <khil...@baylibre.com>
Signed-off-by: Fabien Parent <fpar...@baylibre.com>
[nsek...@ti.com: subject line adjustment]
Signed-off-by: Sekhar Nori <nsek...@ti.com>
Signed-off-by: Jiri Slaby <jsl...@suse.cz>
Signed-off-by: Olof Johansson <o...@lixom.net>
Signed-off-by: Willy Tarreau <w...@1wt.eu>
---
arch/arm/boot/dts/da850-evm.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index c914357..d3c206e 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -59,6 +59,7 @@
#size-cells = <1>;
compatible = "m25p64";
spi-max-frequency = <30000000>;
+ m25p,fast-read;
reg = <0>;
partition@0 {
label = "U-Boot-SPL";
--
2.8.0.rc2.1.gbe9624a
