-stable review patch. If anyone has any objections, please let us know.
------------------
From: Stephen Hemminger <[EMAIL PROTECTED]>
The workaround Yukon EC-U wasn't comparing with correct
version and wasn't doing correct setup. Without it, 88e8056
throws all sorts of errors.
Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
drivers/net/sky2.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -524,9 +524,9 @@ static void sky2_phy_init(struct sky2_hw
ledover &= ~PHY_M_LED_MO_RX;
}
- if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev ==
CHIP_REV_YU_EC_A1) {
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
+ hw->chip_rev == CHIP_REV_YU_EC_U_A1) {
/* apply fixes in PHY AFE */
- pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
/* increase differential signal amplitude in 10BASE-T */
@@ -538,7 +538,7 @@ static void sky2_phy_init(struct sky2_hw
gm_phy_write(hw, port, 0x17, 0x2002);
/* set page register to 0 */
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
} else {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
