Exynos5433 has two usb 3.0 controllers: usbhost and usbdrd. usbhost
is host-only controller whereas usbdrd supports both peripheral and
host mode. "drd" means dual-role device, so usbhost cannot be labeled
with the name contains "drd". Howerver, the label usbdrd_dwc3_0 was
used for usbhost's dwc3 node. It seems it obviously fault because TM2
and TM2E doesn't use usbhost but dr_mode property is assigned to it.
This patch assigns the proper label for two dwc3 nodes, and apply
changes to the related reference.
Signed-off-by: Dongwoo Lee <dwoo08....@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 +-
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 804a270..477c3bc 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -1202,7 +1202,7 @@
status = "okay";
};
-&usbdrd_dwc3_0 {
+&usbdrd_dwc3 {
dr_mode = "otg";
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 727f36a..7fe994b 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1367,7 +1367,7 @@
ranges;
status = "disabled";
- dwc3@15400000 {
+ usbdrd_dwc3: dwc3@15400000 {
compatible = "snps,dwc3";
reg = <0x15400000 0x10000>;
interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
@@ -1414,7 +1414,7 @@
ranges;
status = "disabled";
- usbdrd_dwc3_0: dwc3@15a00000 {
+ usbhost_dwc3: dwc3@15a00000 {
compatible = "snps,dwc3";
reg = <0x15a00000 0x10000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
--
1.9.1
