On Wed, 21 Jun 2017 08:22:06 -0400 Tom Rini <[email protected]> wrote:
> The binding says that the compatible string must be "ti,am33xx-elm" > but the code checks only for, and all functioning users set, this as > "ti,am3352-elm" so correct the binding. > > Cc: David Woodhouse <[email protected]> > Cc: Brian Norris <[email protected]> > Cc: Boris Brezillon <[email protected]> > Cc: Marek Vasut <[email protected]> > Cc: Richard Weinberger <[email protected]> > Cc: Cyrille Pitchen <[email protected]> > Cc: Rob Herring <[email protected]> > Cc: Mark Rutland <[email protected]> > Signed-off-by: Tom Rini <[email protected]> Applied. Thanks, Boris > --- > I have submitted a separate patch that correct the dm816x.dtsi to set > the compatible string there for the elm from ti,816-elm to ti,am3352-elm > and tested it on the hardware, where it works. It is quite likely that > dm814x.dtsi can be trivially corrected as it came after dm816x and > before am335x but as I cannot test the hardware, I did not update that. > --- > Documentation/devicetree/bindings/mtd/elm.txt | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/mtd/elm.txt > b/Documentation/devicetree/bindings/mtd/elm.txt > index 8c1528c421d4..59ddc61c1076 100644 > --- a/Documentation/devicetree/bindings/mtd/elm.txt > +++ b/Documentation/devicetree/bindings/mtd/elm.txt > @@ -1,7 +1,7 @@ > Error location module > > Required properties: > -- compatible: Must be "ti,am33xx-elm" > +- compatible: Must be "ti,am3352-elm" > - reg: physical base address and size of the registers map. > - interrupts: Interrupt number for the elm. >
