Allow devices that use this driver to be registered via a
devicetree.

Signed-off-by: Chris Packham <chris.pack...@alliedtelesis.co.nz>
---
Changes in v2:
- Set i2c->adap.dev.of_node so that child nodes are automatically probed
- Split dt-binding to separate patch, use "reset-gpios" instead of "gpios".
Changes in v3:
- None

 drivers/i2c/busses/i2c-pca-platform.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/i2c/busses/i2c-pca-platform.c 
b/drivers/i2c/busses/i2c-pca-platform.c
index 9f995b8ed587..a6df6b8d2289 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -24,6 +24,8 @@
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/irq.h>
 
@@ -137,12 +139,15 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
        struct resource *res;
        struct i2c_pca9564_pf_platform_data *platform_data =
                                dev_get_platdata(&pdev->dev);
+       struct device_node *np = pdev->dev.of_node;
        int ret = 0;
        int irq;
 
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        irq = platform_get_irq(pdev, 0);
        /* If irq is 0, we do polling. */
+       if (irq < 0)
+               irq = 0;
 
        if (res == NULL) {
                ret = -ENODEV;
@@ -178,6 +183,7 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
                 (unsigned long) res->start);
        i2c->adap.algo_data = &i2c->algo_data;
        i2c->adap.dev.parent = &pdev->dev;
+       i2c->adap.dev.of_node = np;
 
        if (platform_data) {
                i2c->adap.timeout = platform_data->timeout;
@@ -196,6 +202,13 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
                                i2c->gpio = NULL;
                        }
                }
+       } else if (np) {
+               i2c->adap.timeout = HZ;
+               i2c->gpio = devm_gpiod_get_optional(&pdev->dev, "reset-gpios", 
GPIOD_OUT_LOW);
+               if (IS_ERR(i2c->gpio))
+                       return PTR_ERR(i2c->gpio);
+               of_property_read_u32_index(np, "clock-frequency", 0,
+                                          &i2c->algo_data.i2c_clock);
        } else {
                i2c->adap.timeout = HZ;
                i2c->algo_data.i2c_clock = 59000;
@@ -270,11 +283,21 @@ static int i2c_pca_pf_remove(struct platform_device *pdev)
        return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id i2c_pca_of_match_table[] = {
+       { .compatible = "nxp,pca9564" },
+       { .compatible = "nxp,pca9665" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, i2c_pca_of_match_table);
+#endif
+
 static struct platform_driver i2c_pca_pf_driver = {
        .probe = i2c_pca_pf_probe,
        .remove = i2c_pca_pf_remove,
        .driver = {
                .name = "i2c-pca-platform",
+               .of_match_table = of_match_ptr(i2c_pca_of_match_table),
        },
 };
 
-- 
2.13.0

Reply via email to