Hi all! I installed a new kernel 2.6.20.6 and it is unable to boot. During loading, I get some messages from the kernel, similar to the following PCI: BIOS Bug: MCFG area at xxxxx is not E820-reserved PCI: Not using MMCONFIG udevplug: make_queue: unable to create /dev/.udev/queue: No such file or directory udevplug: make_queue: unable to create /dev/.udev/queue: File exists sda: assuming drive cache: write through Then loading stops and after about 2 minutes boots BusyBox. Kernel version 2.6.18.8 and 2.6.16.44-rc2 loaded properly.
the output of dmesg: [17179569.184000] Linux version 2.6.15-26-686 ([EMAIL PROTECTED]) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Sep 8 20:16:40 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable) [17179569.184000] BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data) [17179569.184000] BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) [17179569.184000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [17179569.184000] 1151MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] found SMP MP-table at 000ff780 [17179569.184000] On node 0 totalpages: 524192 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 294816 pages, LIFO batch:31 [17179569.184000] DMI 2.3 present. [17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fad00 [17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x05000504 MSFT 0x00000097) @ 0x7ffa0000 [17179569.184000] ACPI: FADT (v001 A M I OEMFACP 0x05000504 MSFT 0x00000097) @ 0x7ffa0200 [17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x05000504 MSFT 0x00000097) @ 0x7ffa0390 [17179569.184000] ACPI: OEMB (v001 A M I AMI_OEM 0x05000504 MSFT 0x00000097) @ 0x7ffae040 [17179569.184000] >>> ERROR: Invalid checksum [17179569.184000] ACPI: MCFG (v001 A M I OEMMCFG 0x05000504 MSFT 0x00000097) @ 0x7ffa8810 [17179569.184000] ACPI: DSDT (v001 A0229 A0229000 0x00000000 INTL 0x02002026) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x808 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [17179569.184000] Processor #0 15:4 APIC version 20 [17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [17179569.184000] Processor #1 15:4 APIC version 20 [17179569.184000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [17179569.184000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [17179569.184000] ACPI: IRQ0 used by override. [17179569.184000] ACPI: IRQ2 used by override. [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/sda2 ro quiet vga=795 [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes) [17179569.184000] Detected 3011.186 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour dummy device 80x25 [17179572.764000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179572.764000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179572.868000] Memory: 2065764k/2096768k available (2115k kernel code, 29864k reserved, 595k data, 332k init, 1179264k highmem) [17179572.868000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179572.948000] Calibrating delay using timer specific routine.. 6029.29 BogoMIPS (lpj=12058592) [17179572.948000] Security Framework v1.0.0 initialized [17179572.948000] SELinux: Disabled at boot. [17179572.948000] Mount-cache hash table entries: 512 [17179572.948000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000 [17179572.948000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000 [17179572.948000] monitor/mwait feature present. [17179572.948000] using mwait in idle threads. [17179572.948000] CPU: Trace cache: 12K uops, L1 D cache: 16K [17179572.948000] CPU: L2 cache: 2048K [17179572.948000] CPU: Hyper-Threading is disabled [17179572.948000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000649d 00000000 00000000 [17179572.948000] mtrr: v2.0 (20020519) [17179572.948000] Enabling fast FPU save and restore... done. [17179572.948000] Enabling unmasked SIMD FPU exception support... done. [17179572.948000] Checking 'hlt' instruction... OK. [17179572.964000] SMP alternatives: switching to UP code [17179572.964000] checking if image is initramfs... it is [17179573.448000] Freeing initrd memory: 6809k freed [17179573.452000] ACPI: Looking for DSDT ... not found! [17179573.464000] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [17179573.464000] SMP alternatives: switching to SMP code [17179573.464000] Booting processor 1/1 eip 3000 [17179573.476000] Initializing CPU#1 [17179573.556000] Calibrating delay using timer specific routine.. 6021.78 BogoMIPS (lpj=12043573) [17179573.556000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000 [17179573.556000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000 [17179573.556000] monitor/mwait feature present. [17179573.556000] CPU: Trace cache: 12K uops, L1 D cache: 16K [17179573.556000] CPU: L2 cache: 2048K [17179573.556000] CPU: Hyper-Threading is disabled [17179573.556000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000649d 00000000 00000000 [17179573.556000] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [17179573.556000] Total of 2 processors activated (12051.08 BogoMIPS). [17179573.556000] ENABLING IO-APIC IRQs [17179573.556000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [17179573.720000] checking TSC synchronization across 2 CPUs: passed. [17179573.724000] Brought up 2 CPUs [17179573.724000] NET: Registered protocol family 16 [17179573.724000] EISA bus registered [17179573.724000] ACPI: bus type pci registered [17179573.724000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4 [17179573.724000] PCI: Using MMCONFIG [17179573.724000] ACPI: Subsystem revision 20051216 [17179573.740000] ACPI: Interpreter enabled [17179573.740000] ACPI: Using IOAPIC for interrupt routing [17179573.740000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179573.740000] PCI: Probing PCI hardware (bus 00) [17179573.744000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [17179573.744000] Boot video device is 0000:04:00.0 [17179573.744000] PCI: Transparent bridge - 0000:00:1e.0 [17179573.744000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179573.748000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [17179573.748000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [17179573.748000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [17179573.748000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [17179573.756000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [17179573.756000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [17179573.756000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [17179573.756000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [17179573.756000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [17179573.756000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) [17179573.756000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [17179573.756000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [17179573.756000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179573.756000] pnp: PnP ACPI init [17179573.764000] pnp: PnP ACPI: found 16 devices [17179573.764000] PnPBIOS: Disabled by ACPI PNP [17179573.764000] PCI: Using ACPI for IRQ routing [17179573.764000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179573.780000] pnp: 00:07: ioport range 0x290-0x297 has been reserved [17179573.784000] PCI: Bridge: 0000:00:01.0 [17179573.784000] IO window: e000-efff [17179573.784000] MEM window: cff00000-cfffffff [17179573.784000] PREFETCH window: d0000000-dfffffff [17179573.784000] PCI: Bridge: 0000:00:1c.0 [17179573.784000] IO window: d000-dfff [17179573.784000] MEM window: disabled. [17179573.784000] PREFETCH window: disabled. [17179573.784000] PCI: Bridge: 0000:00:1c.4 [17179573.784000] IO window: c000-cfff [17179573.784000] MEM window: cfe00000-cfefffff [17179573.784000] PREFETCH window: disabled. [17179573.784000] PCI: Bridge: 0000:00:1e.0 [17179573.784000] IO window: b000-bfff [17179573.784000] MEM window: cfd00000-cfdfffff [17179573.784000] PREFETCH window: 88000000-880fffff [17179573.784000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179573.784000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [17179573.784000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179573.784000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179573.784000] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 [17179573.784000] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [17179573.784000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [17179573.784000] audit: initializing netlink socket (disabled) [17179573.784000] audit(1176455394.780:1): initialized [17179573.784000] highmem bounce pool size: 64 pages [17179573.784000] VFS: Disk quotas dquot_6.5.1 [17179573.784000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179573.784000] Initializing Cryptographic API [17179573.784000] io scheduler noop registered [17179573.784000] io scheduler anticipatory registered [17179573.784000] io scheduler deadline registered [17179573.784000] io scheduler cfq registered [17179573.784000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179573.784000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [17179573.784000] assign_interrupt_mode Found MSI capability [17179573.784000] Allocate Port Service[pcie00] [17179573.784000] Allocate Port Service[pcie03] [17179573.784000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179573.784000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179573.784000] assign_interrupt_mode Found MSI capability [17179573.784000] Allocate Port Service[pcie00] [17179573.784000] Allocate Port Service[pcie02] [17179573.784000] Allocate Port Service[pcie03] [17179573.784000] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 [17179573.784000] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [17179573.784000] assign_interrupt_mode Found MSI capability [17179573.784000] Allocate Port Service[pcie00] [17179573.784000] Allocate Port Service[pcie02] [17179573.784000] Allocate Port Service[pcie03] [17179573.784000] isapnp: Scanning for PnP cards... [17179574.136000] isapnp: No Plug & Play device found [17179574.156000] Real Time Clock Driver v1.12 [17179574.156000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [17179574.156000] PNP: PS/2 controller doesn't have AUX irq; using default 12 [17179574.160000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179574.160000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179574.160000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179574.160000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179574.160000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179574.164000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179574.164000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179574.164000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179574.164000] mice: PS/2 mouse device common for all mice [17179574.164000] EISA: Probing bus 0 at eisa.0 [17179574.164000] Cannot allocate resource for EISA slot 8 [17179574.164000] EISA: Detected 0 cards. [17179574.164000] NET: Registered protocol family 2 [17179574.204000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179574.220000] IP route cache hash table entries: 131072 (order: 7, 524288 bytes) [17179574.220000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes) [17179574.224000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [17179574.224000] TCP: Hash tables configured (established 262144 bind 65536) [17179574.224000] TCP reno registered [17179574.224000] TCP bic registered [17179574.224000] NET: Registered protocol family 1 [17179574.224000] NET: Registered protocol family 8 [17179574.224000] NET: Registered protocol family 20 [17179574.224000] Starting balanced_irq [17179574.224000] Using IPI No-Shortcut mode [17179574.224000] ACPI wakeup devices: [17179574.224000] P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 P0P8 P0P9 PS2K UAR1 USB2 USB3 USB4 MC97 USB1 EUSB [17179574.224000] ACPI: (supports S0 S1 S3 S4 S5) [17179574.224000] Freeing unused kernel memory: 332k freed [17179574.272000] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k, total 16384k [17179574.272000] vesafb: mode is 1280x1024x32, linelength=5120, pages=2 [17179574.272000] vesafb: protected mode interface info at c000:b540 [17179574.272000] vesafb: scrolling: redraw [17179574.272000] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [17179574.272000] vesafb: Mode is VGA compatible [17179574.404000] Console: switching to colour frame buffer device 160x64 [17179574.404000] fb0: VESA VGA frame buffer device [17179574.416000] Capability LSM initialized [17179574.452000] ACPI: Processor [CPU1] (supports 8 throttling states) [17179574.928000] ICH7: IDE controller at PCI slot 0000:00:1f.1 [17179574.928000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 209 [17179574.928000] ICH7: chipset revision 1 [17179574.928000] ICH7: not 100% native mode: will probe irqs later [17179574.928000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio [17179574.928000] Probing IDE interface ide0... [17179575.688000] hda: ASUS DRW-1608P, ATAPI CD/DVD-ROM drive [17179576.376000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179576.388000] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66) [17179576.388000] Uniform CD-ROM driver Revision: 3.20 [17179576.460000] SCSI subsystem initialized [17179576.464000] ACPI: bus type scsi registered [17179576.464000] libata version 1.20 loaded. [17179576.464000] ata_piix 0000:00:1f.2: version 1.05 [17179576.464000] ata_pci_init_one: pci_dev class+intf: 0x1018f [17179576.464000] ata_pci_init_one: NO_LEGACY == 0 [17179576.464000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 217 [17179576.464000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [17179576.464000] ata1: PATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0x9400 irq 217 [17179576.464000] ata2: PATA max UDMA/133 cmd 0xA000 ctl 0x9802 bmdma 0x9408 irq 217 [17179576.632000] ata1: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f 93:0000 [17179576.632000] ata1: dev 0 ATA-6, max UDMA/133, 312581808 sectors: LBA48 [17179576.632000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe42e0 [17179576.636000] ata1: dev 0 configured for UDMA/133 [17179576.636000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe42e0 [17179576.640000] scsi0 : ata_piix [17179577.808000] ata2: disabling port [17179577.808000] scsi1 : ata_piix [17179577.808000] Vendor: ATA Model: ST3160827AS Rev: 3.42 [17179577.808000] Type: Direct-Access ANSI SCSI revision: 05 [17179577.816000] Driver 'sd' needs updating - please use bus_type methods [17179577.816000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) [17179577.816000] SCSI device sda: drive cache: write back [17179577.816000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) [17179577.816000] SCSI device sda: drive cache: write back [17179577.816000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > [17179577.888000] sd 0:0:0:0: Attached scsi disk sda [17179578.268000] usbcore: registered new driver usbfs [17179578.268000] usbcore: registered new driver hub [17179578.324000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 225 [17179578.324000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [17179578.324000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [17179578.324000] ehci_hcd 0000:00:1d.7: debug port 1 [17179578.324000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [17179578.324000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [17179578.324000] ehci_hcd 0000:00:1d.7: irq 225, io mem 0xcfcff800 [17179578.328000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179578.328000] hub 1-0:1.0: USB hub found [17179578.328000] hub 1-0:1.0: 8 ports detected [17179578.340000] USB Universal Host Controller Interface driver v2.3 [17179578.340000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 225 [17179578.340000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [17179578.340000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [17179578.344000] ieee1394: Initialized config rom entry `ip1394' [17179578.432000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [17179578.432000] uhci_hcd 0000:00:1d.0: irq 225, io base 0x00008000 [17179578.432000] hub 2-0:1.0: USB hub found [17179578.432000] hub 2-0:1.0: 2 ports detected [17179578.536000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 233 [17179578.536000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [17179578.536000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [17179578.536000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [17179578.536000] uhci_hcd 0000:00:1d.1: irq 233, io base 0x00008400 [17179578.536000] hub 3-0:1.0: USB hub found [17179578.536000] hub 3-0:1.0: 2 ports detected [17179578.644000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50 [17179578.644000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [17179578.644000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [17179578.644000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [17179578.644000] uhci_hcd 0000:00:1d.2: irq 50, io base 0x00008800 [17179578.644000] hub 4-0:1.0: USB hub found [17179578.644000] hub 4-0:1.0: 2 ports detected [17179578.748000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58 [17179578.748000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [17179578.748000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [17179578.748000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [17179578.748000] uhci_hcd 0000:00:1d.3: irq 58, io base 0x00009000 [17179578.748000] hub 5-0:1.0: USB hub found [17179578.748000] hub 5-0:1.0: 2 ports detected [17179578.852000] ohci1394: $Rev: 1313 $ Ben Collins <[EMAIL PROTECTED]> [17179578.852000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 66 [17179578.868000] usb 1-7: new high speed USB device using ehci_hcd and address 3 [17179578.900000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66] MMIO=[cfddb800-cfddbfff] Max Packet=[2048] [17179578.920000] Probing IDE interface ide1... [17179579.012000] Initializing USB Mass Storage driver... [17179579.252000] usb 3-1: new low speed USB device using uhci_hcd and address 2 [17179579.428000] scsi2 : SCSI emulation for USB Mass Storage devices [17179579.428000] usb-storage: device found at 3 [17179579.428000] usb-storage: waiting for device to settle before scanning [17179579.428000] usbcore: registered new driver usb-storage [17179579.428000] USB Mass Storage support registered. [17179579.564000] usbcore: registered new driver hiddev [17179579.580000] input: Darfon USB Optical Mouse as /class/input/input1 [17179579.580000] input: USB HID v1.10 Mouse [Darfon USB Optical Mouse] on usb-0000:00:1d.1-1 [17179579.580000] usbcore: registered new driver usbhid [17179579.580000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [17179579.628000] Attempting manual resume [17179579.656000] EXT3-fs: mounted filesystem with ordered data mode. [17179579.656000] kjournald starting. Commit interval 5 seconds [17179580.172000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800003e2806] [17179583.444000] ts: Compaq touchscreen protocol output [17179583.508000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [17179584.432000] Vendor: Kingston Model: DataTraveler II Rev: PMAP [17179584.432000] Type: Direct-Access ANSI SCSI revision: 00 [17179584.432000] SCSI device sdb: 4062208 512-byte hdwr sectors (2080 MB) [17179584.436000] sdb: Write Protect is off [17179584.436000] sdb: Mode Sense: 23 00 00 00 [17179584.436000] sdb: assuming drive cache: write through [17179584.440000] SCSI device sdb: 4062208 512-byte hdwr sectors (2080 MB) [17179584.440000] sdb: Write Protect is off [17179584.440000] sdb: Mode Sense: 23 00 00 00 [17179584.440000] sdb: assuming drive cache: write through [17179584.440000] sdb: sdb1 [17179584.444000] sd 2:0:0:0: Attached scsi removable disk sdb [17179584.444000] sd 2:0:0:0: Attached scsi generic sg1 type 0 [17179584.444000] usb-storage: device scan complete [17179585.496000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179585.500000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179585.560000] hw_random: RNG not detected [17179585.684000] input: PC Speaker as /class/input/input2 [17179585.716000] Floppy drive(s): fd0 is 1.44M [17179585.724000] parport: PnPBIOS parport detected. [17179585.724000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [17179585.736000] FDC 0 is a post-1991 82077 [17179586.168000] Intel(R) PRO/1000 Network Driver - version 7.0.33-k2 [17179586.168000] Copyright (c) 1999-2005 Intel Corporation. [17179586.168000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179586.168000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [17179586.184000] Linux video capture interface: v1.00 [17179586.228000] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:13:d4:1f:a7:54 [17179586.296000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [17179586.296000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 21 (level, low) -> IRQ 66 [17179586.296000] skge 1.5 addr 0xcfddc000 irq 66 chip Yukon-Lite rev 9 [17179586.296000] skge eth1: addr 00:13:d4:1f:ab:a0 [17179586.304000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 58 [17179586.304000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [17179586.384000] saa7130/34: v4l2 driver version 0.2.14 loaded [17179586.692000] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [17179586.916000] ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 23 (level, low) -> IRQ 217 [17179586.916000] saa7133[0]: found at 0000:01:02.0, rev: 208, irq: 217, latency: 64, mmio: 0xcfddb000 [17179586.916000] saa7133[0]: subsystem: 1043:8188, board: UNKNOWN/GENERIC [card=0,autodetected] [17179586.916000] saa7133[0]: board init: gpio is 0 [17179587.052000] saa7133[0]: i2c eeprom 00: 43 10 88 81 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [17179587.052000] saa7133[0]: i2c eeprom 10: 00 01 22 00 ff 20 ff ff ff ff ff ff ff ff ff ff [17179587.052000] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 00 38 ff ff ff ff [17179587.052000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179587.052000] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 08 ff ff ff ff ff ff [17179587.052000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179587.052000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179587.052000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179587.052000] saa7133[0]: registered device video0 [v4l2] [17179587.052000] saa7133[0]: registered device vbi0 [17179587.060000] saa7134 ALSA driver for DMA sound loaded [17179587.060000] saa7133[0]/alsa: saa7133[0] at 0xcfddb000 irq 217 registered as card -1 [17179587.156000] lp0: using parport0 (interrupt-driven). [17179587.204000] sbp2: $Rev: 1306 $ Ben Collins <[EMAIL PROTECTED]> [17179587.204000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179587.204000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179587.248000] Adding 3903752k swap on /dev/sda5. Priority:-1 extents:1 across:3903752k [17179587.268000] EXT3 FS on sda2, internal journal [17179587.376000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [17179587.376000] md: bitmap version 4.39 [17179588.168000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED] [17179588.540000] cdrom: open failed. [17179589.360000] kjournald starting. Commit interval 5 seconds [17179589.360000] EXT3 FS on sda6, internal journal [17179589.360000] EXT3-fs: mounted filesystem with ordered data mode. [17179589.408000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [17179589.476000] NTFS volume version 3.1. [17179589.500000] kjournald starting. Commit interval 5 seconds [17179589.500000] EXT3 FS on sda9, internal journal [17179589.500000] EXT3-fs: mounted filesystem with ordered data mode. [17179589.520000] kjournald starting. Commit interval 5 seconds [17179589.520000] EXT3 FS on sda7, internal journal [17179589.520000] EXT3-fs: mounted filesystem with ordered data mode. [17179589.536000] kjournald starting. Commit interval 5 seconds [17179589.536000] EXT3 FS on sda8, internal journal [17179589.536000] EXT3-fs: mounted filesystem with ordered data mode. [17179594.328000] ACPI: Power Button (FF) [PWRF] [17179594.328000] ACPI: Power Button (CM) [PWRB] [17179594.400000] ibm_acpi: ec object not found [17179594.452000] pcc_acpi: loading... [17179598.672000] ppdev: user-space parallel port driver [17179600.016000] Linux agpgart interface v0.101 (c) Dave Jones [17179600.172000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [17179600.172000] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes. [17179600.172000] [fglrx] module loaded - fglrx 8.33.6 [Jan 8 2007] on minor 0 [17179600.212000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179602.052000] [fglrx] total GART = 130023424 [17179602.052000] [fglrx] free GART = 114032640 [17179602.052000] [fglrx] max single GART = 114032640 [17179602.052000] [fglrx] total LFB = 134086656 [17179602.052000] [fglrx] free LFB = 116256768 [17179602.052000] [fglrx] max single LFB = 116256768 [17179602.052000] [fglrx] total Inv = 134217728 [17179602.052000] [fglrx] free Inv = 134217728 [17179602.052000] [fglrx] max single Inv = 134217728 [17179602.052000] [fglrx] total TIM = 0 [17179616.788000] NET: Registered protocol family 10 [17179616.792000] lo: Disabled Privacy Extensions [17179616.792000] IPv6 over IPv4 tunneling driver [17179644.916000] skge eth0: enabling interface [17179644.940000] ADDRCONF(NETDEV_UP): eth0: link is not ready [17179645.004000] e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex [17179645.004000] e1000: eth1: e1000_watchdog_task: 10/100 speed: disabling TSO [17179646.604000] skge eth0: Link is up at 100 Mbps, full duplex, flow control none [17179646.616000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [17179655.656000] eth1: no IPv6 routers present [17179657.188000] eth0: no IPv6 routers present -- Regards, Denis - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
