No need to get into the submenu to disable all EEPROM-related config entries
Signed-off-by: Vincent Legoll <vincent.leg...@gmail.com>
---
drivers/misc/eeprom/Kconfig | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index de58762..0ea5290 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -1,8 +1,9 @@
-menu "EEPROM support"
+menuconfig EEPROM
+ tristate "EEPROM support"
config EEPROM_AT24
tristate "I2C EEPROMs / RAMs / ROMs from most vendors"
- depends on I2C && SYSFS
+ depends on EEPROM && I2C && SYSFS
select NVMEM
help
Enable this driver to get read/write support to most I2C EEPROMs
@@ -30,7 +31,7 @@ config EEPROM_AT24
config EEPROM_AT25
tristate "SPI EEPROMs from most vendors"
- depends on SPI && SYSFS
+ depends on EEPROM && SPI && SYSFS
select NVMEM
help
Enable this driver to get read/write support to most SPI EEPROMs,
@@ -42,7 +43,7 @@ config EEPROM_AT25
config EEPROM_LEGACY
tristate "Old I2C EEPROM reader"
- depends on I2C && SYSFS
+ depends on EEPROM && I2C && SYSFS
help
If you say yes here you get read-only access to the EEPROM data
available on modern memory DIMMs and Sony Vaio laptops via I2C. Such
@@ -53,7 +54,7 @@ config EEPROM_LEGACY
config EEPROM_MAX6875
tristate "Maxim MAX6874/5 power supply supervisor"
- depends on I2C
+ depends on EEPROM && I2C
help
If you say yes here you get read-only support for the user EEPROM of
the Maxim MAX6874/5 EEPROM-programmable, quad power-supply
@@ -67,6 +68,7 @@ config EEPROM_MAX6875
config EEPROM_93CX6
tristate "EEPROM 93CX6 support"
+ depends on EEPROM
help
This is a driver for the EEPROM chipsets 93c46 and 93c66.
The driver supports both read as well as write commands.
@@ -75,7 +77,7 @@ config EEPROM_93CX6
config EEPROM_93XX46
tristate "Microwire EEPROM 93XX46 support"
- depends on SPI && SYSFS
+ depends on EEPROM && SPI && SYSFS
select REGMAP
select NVMEM
help
@@ -90,7 +92,7 @@ config EEPROM_93XX46
config EEPROM_DIGSY_MTC_CFG
bool "DigsyMTC display configuration EEPROMs device"
- depends on GPIO_MPC5200 && SPI_GPIO
+ depends on EEPROM && GPIO_MPC5200 && SPI_GPIO
help
This option enables access to display configuration EEPROMs
on digsy_mtc board. You have to additionally select Microwire
@@ -102,12 +104,10 @@ config EEPROM_DIGSY_MTC_CFG
config EEPROM_IDT_89HPESX
tristate "IDT 89HPESx PCIe-swtiches EEPROM / CSR support"
- depends on I2C && SYSFS
+ depends on EEPROM && I2C && SYSFS
help
Enable this driver to get read/write access to EEPROM / CSRs
over IDT PCIe-swtich i2c-slave interface.
This driver can also be built as a module. If so, the module
will be called idt_89hpesx.
-
-endmenu
--
2.7.4
