On Wed, Jul 5, 2017 at 11:02 PM, Alexander Gerasiov <[email protected]> wrote:
> WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382
> but serial ports are not soldered on board. Detected as
> Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850])
>
> Signed-off-by: Alexander Gerasiov <[email protected]>
> ---
> drivers/parport/parport_pc.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
> index 78530d1714dc..f00a87cd9ea9 100644
> --- a/drivers/parport/parport_pc.c
> +++ b/drivers/parport/parport_pc.c
> @@ -2646,6 +2646,7 @@ enum parport_pc_pci_cards {
> netmos_9901,
> netmos_9865,
> quatech_sppxp100,
> + wch_ch382_1p,
> };
>
>
> @@ -2708,6 +2709,7 @@ static struct parport_pc_pci {
> /* netmos_9901 */ { 1, { { 0, -1 }, } },
> /* netmos_9865 */ { 1, { { 0, -1 }, } },
> /* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
> + /* wch_ch382_1p*/ { 1, { { 2, -1}, } },
Didn't you miss a space?
> };
>
> static const struct pci_device_id parport_pc_pci_tbl[] = {
> @@ -2797,6 +2799,8 @@ static const struct pci_device_id parport_pc_pci_tbl[]
> = {
> /* Quatech SPPXP-100 Parallel port PCI ExpressCard */
> { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
> + /* WCH CH382L PCI-E single parallel port card */
> + { 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382_1p},
> { 0, } /* terminate list */
> };
> MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);
> --
> 2.11.0
>
--
With Best Regards,
Andy Shevchenko
