This works identically to imx6sx-tempmon on both imx6ul and imx6ull.
It just needs to be defined in dts.

Signed-off-by: Leonard Crestez <leonard.cres...@nxp.com>
---
 arch/arm/boot/dts/imx6ul.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 6da2b77..60084eb 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -598,6 +598,15 @@
                                fsl,anatop = <&anatop>;
                        };
 
+                       tempmon: tempmon {
+                               compatible = "fsl,imx6ul-tempmon", 
"fsl,imx6sx-tempmon";
+                               interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+                               fsl,tempmon = <&anatop>;
+                               nvmem-cells = <&tempmon_calib>, 
<&tempmon_temp_grade>;
+                               nvmem-cell-names = "calib", "temp_grade";
+                               clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+                       };
+
                        snvs: snvs@020cc000 {
                                compatible = "fsl,sec-v4.0-mon", "syscon", 
"simple-mfd";
                                reg = <0x020cc000 0x4000>;
@@ -860,9 +869,17 @@
                        };
 
                        ocotp: ocotp-ctrl@021bc000 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
                                compatible = "fsl,imx6ul-ocotp", "syscon";
                                reg = <0x021bc000 0x4000>;
                                clocks = <&clks IMX6UL_CLK_OCOTP>;
+                               tempmon_calib: calib {
+                                       reg = <56 4>;
+                               };
+                               tempmon_temp_grade: temp_grade {
+                                       reg = <32 4>;
+                               };
                        };
 
                        lcdif: lcdif@021c8000 {
-- 
2.7.4

Reply via email to