hi,
On Friday 07 July 2017 06:37 PM, Srinath Mannam wrote:
> USB phy driver for stingray USB DRDU3 and DRDU2/USB3H
> phy modules
>
> Signed-off-by: Srinath Mannam <srinath.man...@broadcom.com>
> Reviewed-by: Ray Jui <ray....@broadcom.com>
> Reviewed-by: Scott Branden <scott.bran...@broadcom.com>
> ---
> drivers/phy/broadcom/Kconfig | 13 +
> drivers/phy/broadcom/Makefile | 1 +
> drivers/phy/broadcom/phy-bcm-stingray-usb.c | 722
> ++++++++++++++++++++++++++++
> 3 files changed, 736 insertions(+)
> create mode 100644 drivers/phy/broadcom/phy-bcm-stingray-usb.c
>
> diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
> index 37371b8..185a84b 100644
> --- a/drivers/phy/broadcom/Kconfig
> +++ b/drivers/phy/broadcom/Kconfig
> @@ -58,6 +58,19 @@ config PHY_NS2_USB_DRD
>
> If unsure, say N.
>
> +config PHY_STINGRAY_USB
> + tristate "Broadcom Stingray USB2 DRD PHY driver"
> + depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
> + select GENERIC_PHY
> + default ARCH_BCM_IPROC
> + help
> + Enable this to support the Broadcom Stingray USB PHY for DRDU3,
> + DRDU2 and USB3H.
> + This driver initializes the PHY which can be used in both
> + Host and Device modes.
> +
> + If unsure, say N.
> +
> config PHY_BRCM_SATA
> tristate "Broadcom SATA PHY driver"
> depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC ||
> COMPILE_TEST
> diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile
> index 4eb82ec..78c1033 100644
> --- a/drivers/phy/broadcom/Makefile
> +++ b/drivers/phy/broadcom/Makefile
> @@ -4,4 +4,5 @@ obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
> obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
> obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
> obj-$(CONFIG_PHY_NS2_USB_DRD) += phy-bcm-ns2-usbdrd.o
> +obj-$(CONFIG_PHY_STINGRAY_USB) += phy-bcm-stingray-usb.o
> obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
> diff --git a/drivers/phy/broadcom/phy-bcm-stingray-usb.c
> b/drivers/phy/broadcom/phy-bcm-stingray-usb.c
> new file mode 100644
> index 0000000..03603fd
> --- /dev/null
> +++ b/drivers/phy/broadcom/phy-bcm-stingray-usb.c
> @@ -0,0 +1,722 @@
> +/*
> + * Copyright (C) 2017 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +
> +#define DRDU2_U2PLL_NDIV_FRAC 0x0
> +
> +#define DRDU2_U2PLL_NDIV_INT 0x4
> +
> +#define DRDU2_U2PLL_CTRL 0x8
> +#define DRDU2_U2PLL_LOCK BIT(6)
> +#define DRDU2_U2PLL_RESETB BIT(5)
> +#define DRDU2_U2PLL_PDIV_MASK 0xF
> +#define DRDU2_U2PLL_PDIV_OFFSET 1
> +#define DRDU2_U2PLL_SUSPEND_EN BIT(0)
> +
> +#define DRDU2_PHY_CTRL 0x0C
> +#define DRDU2_U2IDDQ BIT(30)
> +#define DRDU2_U2SOFT_RST_N BIT(29)
> +#define DRDU2_U2PHY_ON_FLAG BIT(22)
> +#define DRDU2_U2PHY_PCTL_MASK 0xFFFF
> +#define DRDU2_U2PHY_PCTL_OFFSET 6
> +#define DRDU2_U2PHY_RESETB BIT(5)
> +#define DRDU2_U2PHY_ISO BIT(4)
> +#define DRDU2_U2AFE_BG_PWRDWNB BIT(3)
> +#define DRDU2_U2AFE_PLL_PWRDWNB BIT(2)
> +#define DRDU2_U2AFE_LDO_PWRDWNB BIT(1)
> +#define DRDU2_U2CTRL_CORERDY BIT(0)
> +
> +#define DRDU2_STRAP_CTRL 0x18
> +#define DRDU2_FORCE_HOST_MODE BIT(5)
> +#define DRDU2_FORCE_DEVICE_MODE BIT(4)
> +#define BDC_USB_STP_SPD_MASK 0x7
> +#define BDC_USB_STP_SPD_OFFSET 0
> +
> +#define DRDU2_PWR_CTRL 0x1C
> +#define DRDU2_U2PHY_DFE_SWITCH_PWROKIN_I BIT(2)
> +#define DRDU2_U2PHY_DFE_SWITCH_PWRONIN_I BIT(1)
> +
> +#define DRDU2_SOFT_RESET_CTRL 0x20
> +#define DRDU2_BDC_AXI_SOFT_RST_N BIT(0)
> +
> +#define USB3H_U2PLL_NDIV_FRAC 0x4
> +
> +#define USB3H_U2PLL_NDIV_INT 0x8
> +
> +#define USB3H_U2PLL_CTRL 0xC
> +#define USB3H_U2PLL_LOCK BIT(6)
> +#define USB3H_U2PLL_RESETB BIT(5)
> +#define USB3H_U2PLL_PDIV_MASK 0xF
> +#define USB3H_U2PLL_PDIV_OFFSET 1
> +
> +#define USB3H_U2PHY_CTRL 0x10
> +#define USB3H_U2PHY_ON_FLAG 22
> +#define USB3H_U2PHY_PCTL_MASK 0xFFFF
> +#define USB3H_U2PHY_PCTL_OFFSET 6
> +#define USB3H_U2PHY_RESETB BIT(5)
> +#define USB3H_U2PHY_ISO BIT(4)
> +#define USB3H_U2AFE_BG_PWRDWNB BIT(3)
> +#define USB3H_U2AFE_PLL_PWRDWNB BIT(2)
> +#define USB3H_U2AFE_LDO_PWRDWNB BIT(1)
> +#define USB3H_U2CTRL_CORERDY BIT(0)
> +
> +#define USB3H_U3PHY_CTRL 0x14
> +#define USB3H_U3SOFT_RST_N BIT(30)
> +#define USB3H_U3MDIO_RESETB_I BIT(29)
> +#define USB3H_U3POR_RESET_I BIT(28)
> +#define USB3H_U3PHY_PCTL_MASK 0xFFFF
> +#define USB3H_U3PHY_PCTL_OFFSET 2
> +#define USB3H_U3PHY_RESETB BIT(1)
> +
> +#define USB3H_U3PHY_PLL_CTRL 0x18
> +#define USB3H_U3PLL_REFCLK_MASK 0x7
> +#define USB3H_U3PLL_REFCLK_OFFSET 4
> +#define USB3H_U3PLL_SS_LOCK BIT(3)
> +#define USB3H_U3PLL_SEQ_START BIT(2)
> +#define USB3H_U3SSPLL_SUSPEND_EN BIT(1)
> +#define USB3H_U3PLL_RESETB BIT(0)
> +
> +#define USB3H_PWR_CTRL 0x28
> +#define USB3H_PWR_CTRL_OVERRIDE_I_R 4
> +
> +#define USB3H_SOFT_RESET_CTRL 0x2C
> +#define USB3H_XHC_AXI_SOFT_RST_N BIT(1)
> +
> +#define USB3H_PHY_PWR_CTRL 0x38
> +#define USB3H_DISABLE_USB30_P0 BIT(2)
> +#define USB3H_DISABLE_EUSB_P1 BIT(1)
> +#define USB3H_DISABLE_EUSB_P0 BIT(0)
> +
> +
> +#define DRDU3_U2PLL_NDIV_FRAC 0x4
> +
> +#define DRDU3_U2PLL_NDIV_INT 0x8
> +
> +#define DRDU3_U2PLL_CTRL 0xC
> +#define DRDU3_U2PLL_LOCK BIT(6)
> +#define DRDU3_U2PLL_RESETB BIT(5)
> +#define DRDU3_U2PLL_PDIV_MASK 0xF
> +#define DRDU3_U2PLL_PDIV_OFFSET 1
> +
> +#define DRDU3_U2PHY_CTRL 0x10
> +#define DRDU3_U2PHY_ON_FLAG BIT(22)
> +#define DRDU3_U2PHY_PCTL_MASK 0xFFFF
> +#define DRDU3_U2PHY_PCTL_OFFSET 6
> +#define DRDU3_U2PHY_RESETB BIT(5)
> +#define DRDU3_U2PHY_ISO BIT(4)
> +#define DRDU3_U2AFE_BG_PWRDWNB BIT(3)
> +#define DRDU3_U2AFE_PLL_PWRDWNB BIT(2)
> +#define DRDU3_U2AFE_LDO_PWRDWNB BIT(1)
> +#define DRDU3_U2CTRL_CORERDY BIT(0)
> +
> +#define DRDU3_U3PHY_CTRL 0x14
> +#define DRDU3_U3XHC_SOFT_RST_N BIT(31)
> +#define DRDU3_U3BDC_SOFT_RST_N BIT(30)
> +#define DRDU3_U3MDIO_RESETB_I BIT(29)
> +#define DRDU3_U3POR_RESET_I BIT(28)
> +#define DRDU3_U3PHY_PCTL_MASK 0xFFFF
> +#define DRDU3_U3PHY_PCTL_OFFSET 2
> +#define DRDU3_U3PHY_RESETB BIT(1)
> +
> +#define DRDU3_U3PHY_PLL_CTRL 0x18
> +#define DRDU3_U3PLL_REFCLK_MASK 0x7
> +#define DRDU3_U3PLL_REFCLK_OFFSET 4
> +#define DRDU3_U3PLL_SS_LOCK BIT(3)
> +#define DRDU3_U3PLL_SEQ_START BIT(2)
> +#define DRDU3_U3SSPLL_SUSPEND_EN BIT(1)
> +#define DRDU3_U3PLL_RESETB BIT(0)
> +
> +#define DRDU3_STRAP_CTRL 0x28
> +#define BDC_USB_STP_SPD_MASK 0x7
> +#define BDC_USB_STP_SPD_OFFSET 0
> +#define BDC_USB_STP_SPD_SS 0x0
> +#define BDC_USB_STP_SPD_HS 0x2
> +
> +#define DRDU3_PWR_CTRL 0x2c
> +#define DRDU3_PWR_CTRL_OVERRIDE_I_R 4
> +
> +#define DRDU3_SOFT_RESET_CTRL 0x30
> +#define DRDU3_XHC_AXI_SOFT_RST_N BIT(1)
> +#define DRDU3_BDC_AXI_SOFT_RST_N BIT(0)
> +
> +#define DRDU3_PHY_PWR_CTRL 0x3c
> +#define DRDU3_DISABLE_USB30_P0 BIT(2)
> +#define DRDU3_DISABLE_EUSB_P1 BIT(1)
> +#define DRDU3_DISABLE_EUSB_P0 BIT(0)
> +
> +#define PLL_REFCLK_PAD 0x0
> +#define PLL_REFCLK_25MHZ 0x1
> +#define PLL_REFCLK_96MHZ 0x2
> +#define PLL_REFCLK_INTERNAL 0x3
> +#define PLL_LOCK_RETRY_COUNT 1000
> +
> +
> +#define U2PLL_NDIV_INT_VAL 0x13
> +#define U2PLL_NDIV_FRAC_VAL 0x1005
> +#define U2PLL_PDIV_VAL 0x1
> +/*
> + * 0x0806 of PCTL_VAL has below bits set
> + * BIT-8 : refclk divider 1
> + * BIT-3:2: device mode; mode is not effect
> + * BIT-1: soft reset active low
> + */
> +#define U2PHY_PCTL_VAL 0x0806
> +#define U3PHY_PCTL_VAL 0x0006
> +
> +#define MAX_NR_PORTS 3
> +
> +#define USB3H_DRDU2_PHY 1
> +#define DRDU3_PHY 2
> +
> +#define USB_HOST_MODE 1
> +#define USB_DEV_MODE 2
> +
> +#define USB3SS_PORT 0
> +#define DRDU2_PORT 1
> +#define USB3HS_PORT 2
> +
> +#define DRD3SS_PORT 0
> +#define DRD3HS_PORT 1
> +
> +struct sr_usb_phy {
> + void __iomem *drdu2reg;
> + void __iomem *usb3hreg;
> + void __iomem *drdu3reg;
> + uint32_t phy_id;
> + struct sr_usb_phy_port *phy_port;
> +};
> +
> +struct sr_usb_phy_port {
> + uint32_t port_id;
> + uint32_t mode;
> + struct phy *gphy;
> + struct sr_usb_phy *p;
> +};
> +
> +static inline void reg32_clrbits(void __iomem *addr, uint32_t clear)
> +{
> + writel(readl(addr) & ~clear, addr);
> +}
> +
> +static inline void reg32_setbits(void __iomem *addr, uint32_t set)
> +{
> + writel(readl(addr) | set, addr);
> +}
> +
> +static int pll_lock_check(void __iomem *addr, u32 bit)
> +{
> + int retry;
> + u32 rd_data;
> +
> + retry = PLL_LOCK_RETRY_COUNT;
> + do {
> + rd_data = readl(addr);
> + if (rd_data & bit)
> + return 0;
> + udelay(1);
> + } while (--retry > 0);
> +
> + pr_err("%s: FAIL\n", __func__);
> + return -ETIMEDOUT;
> +}
It would be nice if you can prefix all functions with bcm_usb.
> +
> +static struct phy *bcm_usb_phy_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct sr_usb_phy_port *phy_port = dev_get_drvdata(dev);
> + struct sr_usb_phy *p;
> +
> + if (!phy_port)
> + return ERR_PTR(-EINVAL);
> +
> + p = phy_port->p;
> +
> + if (WARN_ON(args->args[0] < 1 || args->args[0] > 2))
Please use constant enums. I think here it means
PHY_MODE_USB_HOST/PHY_MODE_USB_DEVICE?
> + return ERR_PTR(-EINVAL);
> +
> + if (WARN_ON(args->args_count < 1))
> + return ERR_PTR(-EINVAL);
> +
> + if ((p->phy_id == USB3H_DRDU2_PHY) && (phy_port->port_id == 0) &&
> + (args->args[0] == USB_DEV_MODE))
> + return ERR_PTR(-EINVAL);
port 0 cannot be used for host mode? How about other ports?
> +
> + phy_port->mode |= args->args[0];
When is this mode used? If mode is never used, then this custom xlate is not
required at all.
> +
> + return phy_port->gphy;
> +}
> +
> +static int usb3h_u2_phy_power_on(void __iomem *regs)
> +{
> + u32 rd_data;
> + int ret = 0;
> +
> + /* Set Core Ready high */
> + reg32_setbits(regs + USB3H_U2PHY_CTRL, USB3H_U2CTRL_CORERDY);
> + msleep(100);
That looks like a huge delay? Is it really necessary
> +
> + rd_data = readl(regs + USB3H_U2PHY_CTRL);
> + rd_data &= ~(USB3H_U2PHY_PCTL_MASK << USB3H_U2PHY_PCTL_OFFSET);
> + rd_data |= (U2PHY_PCTL_VAL << USB3H_U2PHY_PCTL_OFFSET);
> + writel(rd_data, regs + USB3H_U2PHY_CTRL);
> +
> + msleep(300);
one more here.
> + reg32_setbits(regs + USB3H_U2PLL_CTRL,
> + USB3H_U2PLL_RESETB);
> +
> + reg32_setbits(regs + USB3H_U2PHY_CTRL,
> + USB3H_U2PHY_RESETB);
> +
> + ret = pll_lock_check(regs + USB3H_U2PLL_CTRL, USB3H_U2PLL_LOCK);
> +
> + return ret;
> +}
> +
> +
> +static int usb3h_u3_phy_power_on(void __iomem *regs)
> +{
> + u32 rd_data;
> + int ret = 0;
> +
> + /* Set pctl with mode and soft reset */
> + rd_data = readl(regs + USB3H_U3PHY_CTRL);
> + rd_data &= ~(USB3H_U3PHY_PCTL_MASK << USB3H_U3PHY_PCTL_OFFSET);
> + rd_data |= (U3PHY_PCTL_VAL << USB3H_U3PHY_PCTL_OFFSET);
> + writel(rd_data, regs + USB3H_U3PHY_CTRL);
> +
> + reg32_clrbits(regs + USB3H_U3PHY_PLL_CTRL,
> + USB3H_U3SSPLL_SUSPEND_EN);
> + reg32_setbits(regs + USB3H_U3PHY_PLL_CTRL,
> + USB3H_U3PLL_SEQ_START);
> + reg32_setbits(regs + USB3H_U3PHY_PLL_CTRL,
> + USB3H_U3PLL_RESETB);
> +
> + msleep(30);
> +
> + ret = pll_lock_check(regs + USB3H_U3PHY_PLL_CTRL, USB3H_U3PLL_SS_LOCK);
> +
> + return ret;
> +}
> +
> +
> +static int drdu3_u2_phy_power_on(void __iomem *regs)
> +{
> + u32 rd_data;
> + int ret = 0;
> +
> + /* Set Core Ready high */
> + reg32_setbits(regs + DRDU3_U2PHY_CTRL, DRDU3_U2CTRL_CORERDY);
> +
> + msleep(100);
> +
> + rd_data = readl(regs + DRDU3_STRAP_CTRL);
> + rd_data &= (~(BDC_USB_STP_SPD_MASK << BDC_USB_STP_SPD_OFFSET));
> + rd_data |= (BDC_USB_STP_SPD_SS << BDC_USB_STP_SPD_OFFSET);
> + writel(rd_data, regs + DRDU3_STRAP_CTRL);
> +
> + rd_data = readl(regs + DRDU3_U2PHY_CTRL);
> + rd_data &= ~(DRDU3_U2PHY_PCTL_MASK << DRDU3_U2PHY_PCTL_OFFSET);
> + rd_data |= (U2PHY_PCTL_VAL << DRDU3_U2PHY_PCTL_OFFSET);
> + writel(rd_data, regs + DRDU3_U2PHY_CTRL);
> +
> + msleep(300);
> +
> + reg32_setbits(regs + DRDU3_U2PLL_CTRL,
> + DRDU3_U2PLL_RESETB);
> +
> + reg32_setbits(regs + DRDU3_U2PHY_CTRL,
> + DRDU3_U2PHY_RESETB);
> +
> + ret = pll_lock_check(regs + DRDU3_U2PLL_CTRL, DRDU3_U2PLL_LOCK);
> +
> + return ret;
> +}
> +
> +static int drdu3_u3_phy_power_on(void __iomem *regs)
> +{
> + u32 rd_data;
> + int ret = 0;
> +
> + /* Set pctl with mode and soft reset */
> + rd_data = readl(regs + DRDU3_U3PHY_CTRL);
> + rd_data &= ~(DRDU3_U3PHY_PCTL_MASK << DRDU3_U3PHY_PCTL_OFFSET);
> + rd_data |= (U3PHY_PCTL_VAL << DRDU3_U3PHY_PCTL_OFFSET);
> + writel(rd_data, regs + DRDU3_U3PHY_CTRL);
> +
> + reg32_clrbits(regs + DRDU3_U3PHY_PLL_CTRL,
> + DRDU3_U3SSPLL_SUSPEND_EN);
> + reg32_setbits(regs + DRDU3_U3PHY_PLL_CTRL,
> + DRDU3_U3PLL_SEQ_START);
> + reg32_setbits(regs + DRDU3_U3PHY_PLL_CTRL,
> + DRDU3_U3PLL_RESETB);
> +
> + msleep(30);
> +
> + ret = pll_lock_check(regs + DRDU3_U3PHY_PLL_CTRL, DRDU3_U3PLL_SS_LOCK);
> +
> + return ret;
> +}
> +
> +
> +static int drdu2_u2_phy_power_on(void __iomem *regs)
> +{
> + u32 rd_data;
> + int ret = 0;
> +
> + writel(U2PLL_NDIV_INT_VAL, regs + DRDU2_U2PLL_NDIV_INT);
> + writel(U2PLL_NDIV_FRAC_VAL, regs + DRDU2_U2PLL_NDIV_FRAC);
> +
> + rd_data = readl(regs + DRDU2_U2PLL_CTRL);
> + rd_data &= ~(DRDU2_U2PLL_PDIV_MASK << DRDU2_U2PLL_PDIV_OFFSET);
> + rd_data |= (U2PLL_PDIV_VAL << DRDU2_U2PLL_PDIV_OFFSET);
> + writel(rd_data, regs + DRDU2_U2PLL_CTRL);
> +
> + reg32_setbits(regs + DRDU2_PHY_CTRL, DRDU2_U2CTRL_CORERDY);
> +
> + msleep(100);
> + reg32_setbits(regs + DRDU2_U2PLL_CTRL,
> + DRDU2_U2PLL_RESETB);
> +
> + reg32_setbits(regs + DRDU2_PHY_CTRL,
> + DRDU2_U2PHY_RESETB);
> +
> + rd_data = readl(regs + DRDU2_PHY_CTRL);
> + rd_data &= ~(DRDU2_U2PHY_PCTL_MASK << DRDU2_U2PHY_PCTL_OFFSET);
> + rd_data |= (U2PHY_PCTL_VAL << DRDU2_U2PHY_PCTL_OFFSET);
> + writel(rd_data, regs + DRDU2_PHY_CTRL);
> +
> + ret = pll_lock_check(regs + DRDU2_U2PLL_CTRL, DRDU2_U2PLL_LOCK);
> +
> + return ret;
> +}
> +static int sr_u3h_u2drd_phy_reset(struct phy *gphy)
> +{
> + struct sr_usb_phy_port *phy_port = phy_get_drvdata(gphy);
> + struct sr_usb_phy *p = phy_port->p;
> +
> + switch (phy_port->port_id) {
> + case USB3HS_PORT:
> + reg32_clrbits(p->usb3hreg + USB3H_U2PHY_CTRL,
> + USB3H_U2CTRL_CORERDY);
> + reg32_setbits(p->usb3hreg + USB3H_U2PHY_CTRL,
> + USB3H_U2CTRL_CORERDY);
> + break;
> + case DRDU2_PORT:
> + reg32_clrbits(p->drdu2reg + DRDU2_PHY_CTRL,
> + DRDU2_U2CTRL_CORERDY);
> + reg32_setbits(p->drdu2reg + DRDU2_PHY_CTRL,
> + DRDU2_U2CTRL_CORERDY);
> + break;
> + }
> + return 0;
> +}
> +
> +static int sr_u3drd_phy_reset(struct phy *gphy)
> +{
> + struct sr_usb_phy_port *phy_port = phy_get_drvdata(gphy);
> + struct sr_usb_phy *p = phy_port->p;
> +
> + switch (phy_port->port_id) {
> + case DRD3HS_PORT:
> + reg32_clrbits(p->drdu3reg + DRDU3_U2PHY_CTRL,
> + DRDU3_U2CTRL_CORERDY);
> + reg32_setbits(p->drdu3reg + DRDU3_U2PHY_CTRL,
> + DRDU3_U2CTRL_CORERDY);
> + break;
> + }
> + return 0;
> +}
> +
> +static int sr_u3h_u2drd_phy_power_on(struct phy *gphy)
> +{
> + struct sr_usb_phy_port *phy_port = phy_get_drvdata(gphy);
> + struct sr_usb_phy *p = phy_port->p;
> + int ret = 0;
> +
> + switch (phy_port->port_id) {
> + case USB3SS_PORT:
> + reg32_clrbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
> + USB3H_DISABLE_USB30_P0);
> + ret = usb3h_u3_phy_power_on(p->usb3hreg);
> + if (ret)
> + goto err_usb3h_phy_on;
> + break;
> + case USB3HS_PORT:
> + reg32_clrbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
> + USB3H_DISABLE_EUSB_P1);
> + ret = usb3h_u2_phy_power_on(p->usb3hreg);
> + if (ret)
> + goto err_usb3h_phy_on;
> +
> + break;
> + case DRDU2_PORT:
> + reg32_clrbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
> + USB3H_DISABLE_EUSB_P0);
> +
> + ret = drdu2_u2_phy_power_on(p->drdu2reg);
> + if (ret) {
> + reg32_setbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
> + USB3H_DISABLE_EUSB_P0);
> + goto err_drdu2_phy_on;
> + }
> + break;
> + }
> +
> + /* Device Mode */
> + if (phy_port->port_id == DRDU2_PORT) {
> + writel(DRDU2_BDC_AXI_SOFT_RST_N,
> + p->drdu2reg + DRDU2_SOFT_RESET_CTRL);
> + reg32_setbits(p->drdu2reg + DRDU2_PHY_CTRL,
> + DRDU2_U2SOFT_RST_N);
> + }
> + /* Host Mode */
> + writel(USB3H_XHC_AXI_SOFT_RST_N,
> + p->usb3hreg + USB3H_SOFT_RESET_CTRL);
> + reg32_setbits(p->usb3hreg + USB3H_U3PHY_CTRL,
> + USB3H_U3SOFT_RST_N);
> +
> + return 0;
> +err_usb3h_phy_on:
> + reg32_setbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
> + (USB3H_DISABLE_EUSB_P1 |
> + USB3H_DISABLE_USB30_P0));
> +err_drdu2_phy_on:
> +
> + return ret;
> +}
> +
> +static int sr_u3drd_phy_power_on(struct phy *gphy)
> +{
> + struct sr_usb_phy_port *phy_port = phy_get_drvdata(gphy);
> + struct sr_usb_phy *p = phy_port->p;
> + int ret = 0;
> +
> + switch (phy_port->port_id) {
> + case DRD3SS_PORT:
> + reg32_clrbits(p->drdu3reg + USB3H_PHY_PWR_CTRL,
> + DRDU3_DISABLE_USB30_P0);
> +
> + ret = drdu3_u3_phy_power_on(p->drdu3reg);
> + if (ret)
> + goto err_drdu3_phy_on;
> + break;
> + case DRD3HS_PORT:
> + reg32_clrbits(p->drdu3reg + USB3H_PHY_PWR_CTRL,
> + DRDU3_DISABLE_EUSB_P0);
> + ret = drdu3_u2_phy_power_on(p->drdu3reg);
> + if (ret)
> + goto err_drdu3_phy_on;
> + break;
> + }
> + /* Host Mode */
> + reg32_setbits(p->drdu3reg + DRDU3_SOFT_RESET_CTRL,
> + DRDU3_XHC_AXI_SOFT_RST_N);
> + reg32_setbits(p->drdu3reg + DRDU3_U3PHY_CTRL,
> + DRDU3_U3XHC_SOFT_RST_N);
> + /* Device Mode */
> + reg32_setbits(p->drdu3reg + DRDU3_SOFT_RESET_CTRL,
> + DRDU3_BDC_AXI_SOFT_RST_N);
> + reg32_setbits(p->drdu3reg + DRDU3_U3PHY_CTRL,
> + DRDU3_U3BDC_SOFT_RST_N);
> +
> + return 0;
> +err_drdu3_phy_on:
> + reg32_setbits(p->drdu3reg + DRDU3_PHY_PWR_CTRL,
> + (DRDU3_DISABLE_EUSB_P0 |
> + DRDU3_DISABLE_USB30_P0));
> +
> + return ret;
> +}
> +
> +static int sr_u3h_u2drd_phy_power_off(struct phy *gphy)
> +{
> + struct sr_usb_phy_port *phy_port = phy_get_drvdata(gphy);
> + struct sr_usb_phy *p = phy_port->p;
> +
> + switch (phy_port->port_id) {
> + case USB3SS_PORT:
> + reg32_setbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
> + USB3H_DISABLE_USB30_P0);
> + break;
> + case USB3HS_PORT:
> + reg32_setbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
> + USB3H_DISABLE_EUSB_P1);
> + break;
> + case DRDU2_PORT:
> + reg32_setbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
> + USB3H_DISABLE_EUSB_P0);
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static int sr_u3drd_phy_power_off(struct phy *gphy)
> +{
> + struct sr_usb_phy_port *phy_port = phy_get_drvdata(gphy);
> + struct sr_usb_phy *p = phy_port->p;
> +
> + switch (phy_port->port_id) {
> + case DRD3SS_PORT:
> + reg32_setbits(p->drdu3reg + DRDU3_PHY_PWR_CTRL,
> + DRDU3_DISABLE_USB30_P0);
> + break;
> + case DRD3HS_PORT:
> + reg32_setbits(p->drdu3reg + DRDU3_PHY_PWR_CTRL,
> + DRDU3_DISABLE_EUSB_P0);
> + break;
> + }
> + return 0;
> +}
> +
> +static struct phy_ops sr_u3h_u2drd_phy_ops = {
> + .power_on = sr_u3h_u2drd_phy_power_on,
> + .power_off = sr_u3h_u2drd_phy_power_off,
> + .reset = sr_u3h_u2drd_phy_reset,
> + .owner = THIS_MODULE,
> +};
> +
> +static struct phy_ops sr_u3drd_phy_ops = {
> + .power_on = sr_u3drd_phy_power_on,
> + .power_off = sr_u3drd_phy_power_off,
> + .reset = sr_u3drd_phy_reset,
> + .owner = THIS_MODULE,
> +};
Can you split this patch into 2 so that it's easier to review. 1st patch add
u2drd_phy and then add u3drd_phy.
> +
> +static const struct of_device_id sr_usb_phy_of_match[] = {
> + {
> + .compatible = "brcm,sr-u3h-u2drd-phy",
> + .data = &sr_u3h_u2drd_phy_ops,
> + },
> + {
> + .compatible = "brcm,sr-u3drd-phy",
> + .data = &sr_u3drd_phy_ops,
> + },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, sr_usb_phy_of_match);
> +
> +static int sr_usb_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct sr_usb_phy *p;
> + struct device_node *dn = dev->of_node, *child;
> + struct resource *res;
> + struct phy *gphy;
> + const struct phy_ops *ops;
> + struct phy_provider *phy_provider;
> + const struct of_device_id *match;
> + struct sr_usb_phy_port *phy_port;
> + uint32_t child_cnt, cnt = 0;
> +
> + match = of_match_node(sr_usb_phy_of_match, dn);
> + if (!match) {
> + dev_err(dev, "of_match_node() failed\n");
> + return -EINVAL;
> + }
> + ops = match->data;
> +
> + child_cnt = of_get_child_count(dn);
> + if (!child_cnt || child_cnt > MAX_NR_PORTS)
> + return -ENODEV;
> +
> + p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
> + if (!p)
> + return -ENOMEM;
> +
> + p->phy_port = devm_kcalloc(dev, child_cnt,
> + sizeof(struct sr_usb_phy_port),
> + GFP_KERNEL);
> + if (!p->phy_port)
> + return -ENOMEM;
> +
> + if (of_device_is_compatible(dn, "brcm,sr-u3h-u2drd-phy")) {
> + void __iomem *drdu2reg, *usb3hreg;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "drdu2");
> + drdu2reg = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(drdu2reg))
> + return PTR_ERR(drdu2reg);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "usb3h");
> + usb3hreg = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(usb3hreg))
> + return PTR_ERR(usb3hreg);
> +
> + p->drdu2reg = drdu2reg;
> + p->usb3hreg = usb3hreg;
> + p->phy_id = USB3H_DRDU2_PHY;
> + }
> + if (of_device_is_compatible(dn, "brcm,sr-u3drd-phy")) {
> + void __iomem *drdu3reg;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "drdu3");
> + drdu3reg = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(drdu3reg))
> + return PTR_ERR(drdu3reg);
> +
> + p->drdu3reg = drdu3reg;
> + p->phy_id = DRDU3_PHY;
> + }
> +
> + for_each_available_child_of_node(dn, child) {
> + phy_port = &p->phy_port[cnt];
> + if (of_property_read_u32(child, "reg", &phy_port->port_id)) {
> + dev_err(dev, "missing reg property in node %s\n",
> + child->name);
> + return -EINVAL;
> + }
> + if (phy_port->port_id >= MAX_NR_PORTS)
> + return -EINVAL;
> +
> + gphy = devm_phy_create(dev, child, ops);
> + if (IS_ERR(gphy))
> + return PTR_ERR(gphy);
> +
> + phy_set_drvdata(gphy, phy_port);
> + dev_set_drvdata(&gphy->dev, phy_port);
why do you need dev_set_drvdata when phy_set_drvdata already saves private data
for you?
Thanks
Kishon
