Register init table use un-document define, it is unreadable,
And sometimes we only want to update tiny bits, init table
method is not friendly, it's diffcult to reuse for difference
chips.

Signed-off-by: Mark Yao <mark....@rock-chips.com>
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c |  6 ++--
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 10 ++-----
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 43 +++--------------------------
 3 files changed, 10 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c 
b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 45589d6..7a5f809 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1393,7 +1393,6 @@ static void vop_destroy_crtc(struct vop *vop)
 static int vop_initial(struct vop *vop)
 {
        const struct vop_data *vop_data = vop->data;
-       const struct vop_reg_data *init_table = vop_data->init_table;
        struct reset_control *ahb_rst;
        int i, ret;
 
@@ -1453,13 +1452,14 @@ static int vop_initial(struct vop *vop)
 
        memcpy(vop->regsbak, vop->regs, vop->len);
 
-       for (i = 0; i < vop_data->table_size; i++)
-               vop_writel(vop, init_table[i].offset, init_table[i].value);
+       VOP_CTRL_SET(vop, global_regdone_en, 1);
+       VOP_CTRL_SET(vop, dsp_blank, 0);
 
        for (i = 0; i < vop_data->win_size; i++) {
                const struct vop_win_data *win = &vop_data->win[i];
 
                VOP_WIN_SET(vop, win, enable, 0);
+               VOP_WIN_SET(vop, win, gate, 1);
        }
 
        vop_cfg_done(vop);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h 
b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
index 9979fd0..084d3b2 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
@@ -24,11 +24,6 @@ enum vop_data_format {
        VOP_FMT_YUV444SP,
 };
 
-struct vop_reg_data {
-       uint32_t offset;
-       uint32_t value;
-};
-
 struct vop_reg {
        uint32_t offset;
        uint32_t shift;
@@ -46,6 +41,7 @@ struct vop_ctrl {
        struct vop_reg hdmi_en;
        struct vop_reg mipi_en;
        struct vop_reg dp_en;
+       struct vop_reg dsp_blank;
        struct vop_reg out_mode;
        struct vop_reg dither_down;
        struct vop_reg dither_up;
@@ -65,6 +61,7 @@ struct vop_ctrl {
 
        struct vop_reg line_flag_num[2];
 
+       struct vop_reg global_regdone_en;
        struct vop_reg cfg_done;
 };
 
@@ -115,6 +112,7 @@ struct vop_win_phy {
        uint32_t nformats;
 
        struct vop_reg enable;
+       struct vop_reg gate;
        struct vop_reg format;
        struct vop_reg rb_swap;
        struct vop_reg act_info;
@@ -136,8 +134,6 @@ struct vop_win_data {
 };
 
 struct vop_data {
-       const struct vop_reg_data *init_table;
-       unsigned int table_size;
        const struct vop_ctrl *ctrl;
        const struct vop_intr *intr;
        const struct vop_win_data *win;
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c 
b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
index bafd698..00e9d79 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
@@ -127,13 +127,7 @@
        .cfg_done = VOP_REG(RK3036_REG_CFG_DONE, 0x1, 0),
 };
 
-static const struct vop_reg_data rk3036_vop_init_reg_table[] = {
-       {RK3036_DSP_CTRL1, 0x00000000},
-};
-
 static const struct vop_data rk3036_vop = {
-       .init_table = rk3036_vop_init_reg_table,
-       .table_size = ARRAY_SIZE(rk3036_vop_init_reg_table),
        .ctrl = &rk3036_ctrl_data,
        .intr = &rk3036_intr,
        .win = rk3036_vop_win_data,
@@ -193,7 +187,8 @@
 static const struct vop_win_phy rk3288_win23_data = {
        .data_formats = formats_win_lite,
        .nformats = ARRAY_SIZE(formats_win_lite),
-       .enable = VOP_REG(RK3288_WIN2_CTRL0, 0x1, 0),
+       .enable = VOP_REG(RK3288_WIN2_CTRL0, 0x1, 4),
+       .gate = VOP_REG(RK3288_WIN2_CTRL0, 0x1, 0),
        .format = VOP_REG(RK3288_WIN2_CTRL0, 0x7, 1),
        .rb_swap = VOP_REG(RK3288_WIN2_CTRL0, 0x1, 12),
        .dsp_info = VOP_REG(RK3288_WIN2_DSP_INFO0, 0x0fff0fff, 0),
@@ -215,6 +210,7 @@
        .dither_down = VOP_REG(RK3288_DSP_CTRL1, 0xf, 1),
        .dither_up = VOP_REG(RK3288_DSP_CTRL1, 0x1, 6),
        .data_blank = VOP_REG(RK3288_DSP_CTRL0, 0x1, 19),
+       .dsp_blank = VOP_REG(RK3288_DSP_CTRL0, 0x3, 18),
        .out_mode = VOP_REG(RK3288_DSP_CTRL0, 0xf, 0),
        .pin_pol = VOP_REG(RK3288_DSP_CTRL0, 0xf, 4),
        .htotal_pw = VOP_REG(RK3288_DSP_HTOTAL_HS_END, 0x1fff1fff, 0),
@@ -224,22 +220,10 @@
        .hpost_st_end = VOP_REG(RK3288_POST_DSP_HACT_INFO, 0x1fff1fff, 0),
        .vpost_st_end = VOP_REG(RK3288_POST_DSP_VACT_INFO, 0x1fff1fff, 0),
        .line_flag_num[0] = VOP_REG(RK3288_INTR_CTRL0, 0x1fff, 12),
+       .global_regdone_en = VOP_REG(RK3288_SYS_CTRL, 0x1, 11),
        .cfg_done = VOP_REG(RK3288_REG_CFG_DONE, 0x1, 0),
 };
 
-static const struct vop_reg_data rk3288_init_reg_table[] = {
-       {RK3288_SYS_CTRL, 0x00c00000},
-       {RK3288_DSP_CTRL0, 0x00000000},
-       {RK3288_WIN0_CTRL0, 0x00000080},
-       {RK3288_WIN1_CTRL0, 0x00000080},
-       /* TODO: Win2/3 support multiple area function, but we haven't found
-        * a suitable way to use it yet, so let's just use them as other windows
-        * with only area 0 enabled.
-        */
-       {RK3288_WIN2_CTRL0, 0x00000010},
-       {RK3288_WIN3_CTRL0, 0x00000010},
-};
-
 /*
  * Note: rk3288 has a dedicated 'cursor' window, however, that window requires
  * special support to get alpha blending working.  For now, just use overlay
@@ -273,8 +257,6 @@
 };
 
 static const struct vop_data rk3288_vop = {
-       .init_table = rk3288_init_reg_table,
-       .table_size = ARRAY_SIZE(rk3288_init_reg_table),
        .feature = VOP_FEATURE_OUTPUT_RGB10,
        .intr = &rk3288_vop_intr,
        .ctrl = &rk3288_ctrl_data,
@@ -328,22 +310,7 @@
        .clear = VOP_REG_MASK(RK3399_INTR_CLEAR0, 0xffff, 0),
 };
 
-static const struct vop_reg_data rk3399_init_reg_table[] = {
-       {RK3399_SYS_CTRL, 0x2000f800},
-       {RK3399_DSP_CTRL0, 0x00000000},
-       {RK3399_WIN0_CTRL0, 0x00000080},
-       {RK3399_WIN1_CTRL0, 0x00000080},
-       /* TODO: Win2/3 support multiple area function, but we haven't found
-        * a suitable way to use it yet, so let's just use them as other windows
-        * with only area 0 enabled.
-        */
-       {RK3399_WIN2_CTRL0, 0x00000010},
-       {RK3399_WIN3_CTRL0, 0x00000010},
-};
-
 static const struct vop_data rk3399_vop_big = {
-       .init_table = rk3399_init_reg_table,
-       .table_size = ARRAY_SIZE(rk3399_init_reg_table),
        .feature = VOP_FEATURE_OUTPUT_RGB10,
        .intr = &rk3399_vop_intr,
        .ctrl = &rk3399_ctrl_data,
@@ -362,8 +329,6 @@
 };
 
 static const struct vop_data rk3399_vop_lit = {
-       .init_table = rk3399_init_reg_table,
-       .table_size = ARRAY_SIZE(rk3399_init_reg_table),
        .intr = &rk3399_vop_intr,
        .ctrl = &rk3399_ctrl_data,
        /*
-- 
1.9.1


Reply via email to