On Tue, Jun 20, 2017 at 02:08:44PM +0100, Lorenzo Pieralisi wrote:
> commit 01cf9d524ff0 ("microblaze/PCI: Support generic Xilinx AXI PCIe Host
> Bridge IP driver") removed pcibios calls to:
>
> pcibios_setup_bus_self()
> pcibios_setup_bus_devices()
>
> Given that pcibios_fixup_bus() was the only caller of those functions
> they have now become dead code (along with the functions they were
> calling in turn) so they can be removed.
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieral...@arm.com>
> Cc: Bharat Kumar Gogada <bhara...@xilinx.com>
> Cc: Ravi Kiran Gummaluri <rgum...@xilinx.com>
> Cc: Bjorn Helgaas <bhelg...@google.com>
> Cc: Michal Simek <michal.si...@xilinx.com>
Applied with Michal's ack to pci/misc for v4.14, thanks!
I also removed the "Fixup resources of a PCI<->PCI bridge" comment
since it's no longer applicable.
> ---
> Bjorn, Michal,
>
> spotted this while reading microblaze code that parses legacy IRQs,
> I am not familiar with microblaze code but as things stand those
> pcibios calls are just unused IIUC.
>
> Lorenzo
>
> arch/microblaze/include/asm/pci.h | 3 -
> arch/microblaze/pci/pci-common.c | 131
> --------------------------------------
> 2 files changed, 134 deletions(-)
>
> diff --git a/arch/microblaze/include/asm/pci.h
> b/arch/microblaze/include/asm/pci.h
> index efd4983..114b934 100644
> --- a/arch/microblaze/include/asm/pci.h
> +++ b/arch/microblaze/include/asm/pci.h
> @@ -81,9 +81,6 @@ extern pgprot_t pci_phys_mem_access_prot(struct file
> *file,
>
> #define HAVE_ARCH_PCI_RESOURCE_TO_USER
>
> -extern void pcibios_setup_bus_devices(struct pci_bus *bus);
> -extern void pcibios_setup_bus_self(struct pci_bus *bus);
> -
> /* This part of code was originally in xilinx-pci.h */
> #ifdef CONFIG_PCI_XILINX
> extern void __init xilinx_pci_init(void);
> diff --git a/arch/microblaze/pci/pci-common.c
> b/arch/microblaze/pci/pci-common.c
> index 404fb38..970b3a7 100644
> --- a/arch/microblaze/pci/pci-common.c
> +++ b/arch/microblaze/pci/pci-common.c
> @@ -678,138 +678,7 @@ static void pcibios_fixup_resources(struct pci_dev *dev)
> }
> DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
>
> -/* This function tries to figure out if a bridge resource has been
> initialized
> - * by the firmware or not. It doesn't have to be absolutely bullet proof, but
> - * things go more smoothly when it gets it right. It should covers cases such
> - * as Apple "closed" bridge resources and bare-metal pSeries unassigned
> bridges
> - */
> -static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
> - struct resource *res)
> -{
> - struct pci_controller *hose = pci_bus_to_host(bus);
> - struct pci_dev *dev = bus->self;
> - resource_size_t offset;
> - u16 command;
> - int i;
> -
> - /* Job is a bit different between memory and IO */
> - if (res->flags & IORESOURCE_MEM) {
> - /* If the BAR is non-0 (res != pci_mem_offset) then it's
> - * probably been initialized by somebody
> - */
> - if (res->start != hose->pci_mem_offset)
> - return 0;
> -
> - /* The BAR is 0, let's check if memory decoding is enabled on
> - * the bridge. If not, we consider it unassigned
> - */
> - pci_read_config_word(dev, PCI_COMMAND, &command);
> - if ((command & PCI_COMMAND_MEMORY) == 0)
> - return 1;
> -
> - /* Memory decoding is enabled and the BAR is 0. If any of
> - * the bridge resources covers that starting address (0 then
> - * it's good enough for us for memory
> - */
> - for (i = 0; i < 3; i++) {
> - if ((hose->mem_resources[i].flags & IORESOURCE_MEM) &&
> - hose->mem_resources[i].start == hose->pci_mem_offset)
> - return 0;
> - }
> -
> - /* Well, it starts at 0 and we know it will collide so we may as
> - * well consider it as unassigned. That covers the Apple case.
> - */
> - return 1;
> - } else {
> - /* If the BAR is non-0, then we consider it assigned */
> - offset = (unsigned long)hose->io_base_virt - _IO_BASE;
> - if (((res->start - offset) & 0xfffffffful) != 0)
> - return 0;
> -
> - /* Here, we are a bit different than memory as typically IO
> - * space starting at low addresses -is- valid. What we do
> - * instead if that we consider as unassigned anything that
> - * doesn't have IO enabled in the PCI command register,
> - * and that's it.
> - */
> - pci_read_config_word(dev, PCI_COMMAND, &command);
> - if (command & PCI_COMMAND_IO)
> - return 0;
> -
> - /* It's starting at 0 and IO is disabled in the bridge, consider
> - * it unassigned
> - */
> - return 1;
> - }
> -}
> -
> /* Fixup resources of a PCI<->PCI bridge */
> -static void pcibios_fixup_bridge(struct pci_bus *bus)
> -{
> - struct resource *res;
> - int i;
> -
> - struct pci_dev *dev = bus->self;
> -
> - pci_bus_for_each_resource(bus, res, i) {
> - if (!res)
> - continue;
> - if (!res->flags)
> - continue;
> - if (i >= 3 && bus->self->transparent)
> - continue;
> -
> - pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
> - pci_name(dev), i,
> - (unsigned long long)res->start,
> - (unsigned long long)res->end,
> - (unsigned int)res->flags);
> -
> - /* Try to detect uninitialized P2P bridge resources,
> - * and clear them out so they get re-assigned later
> - */
> - if (pcibios_uninitialized_bridge_resource(bus, res)) {
> - res->flags = 0;
> - pr_debug("PCI:%s (unassigned)\n",
> - pci_name(dev));
> - } else {
> - pr_debug("PCI:%s %016llx-%016llx\n",
> - pci_name(dev),
> - (unsigned long long)res->start,
> - (unsigned long long)res->end);
> - }
> - }
> -}
> -
> -void pcibios_setup_bus_self(struct pci_bus *bus)
> -{
> - /* Fix up the bus resources for P2P bridges */
> - if (bus->self != NULL)
> - pcibios_fixup_bridge(bus);
> -}
> -
> -void pcibios_setup_bus_devices(struct pci_bus *bus)
> -{
> - struct pci_dev *dev;
> -
> - pr_debug("PCI: Fixup bus devices %d (%s)\n",
> - bus->number, bus->self ? pci_name(bus->self) : "PHB");
> -
> - list_for_each_entry(dev, &bus->devices, bus_list) {
> - /* Setup OF node pointer in archdata */
> - dev->dev.of_node = pci_device_to_OF_node(dev);
> -
> - /* Fixup NUMA node as it may not be setup yet by the generic
> - * code and is needed by the DMA init
> - */
> - set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
> -
> - /* Read default IRQs and fixup if necessary */
> - dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
> - }
> -}
> -
> void pcibios_fixup_bus(struct pci_bus *bus)
> {
> /* nothing to do */
> --
> 2.10.0
>
