Hi, 2017-07-17 10:54 GMT+02:00 Chanwoo Choi <cw00.c...@samsung.com>: > Hi Enric, > > When I tried to apply this patch, error happened as following: > (based on v4.13-rc1) > > Applying: extcon: cros-ec: Add extcon-cros-ec driver to support display out. > error: patch failed: include/linux/mfd/cros_ec_commands.h:285 > error: include/linux/mfd/cros_ec_commands.h: patch does not apply >
Very sorry about that, I had another patch that touched this file and I forget to invert the sequence, first apply these patches then the others. Let me fix that and resend again in few minutes, Very sorry for the noise. > Is it based on v4.13-rc1? > > > On 2017년 07월 17일 16:37, Enric Balletbo i Serra wrote: >> From: Benson Leung <ble...@chromium.org> >> >> This is the driver for the USB Type C cable detection mechanism >> built into the ChromeOS Embedded Controller on systems that >> have USB Type-C ports. >> >> At present, this allows for the presence of display out, but in >> future, it may also be used to notify host and device type cables >> and the presence of power. >> >> Signed-off-by: Benson Leung <ble...@chromium.org> >> Signed-off-by: Enric Balletbo i Serra <enric.balle...@collabora.com> >> Acked-by: Chanwoo Choi <cw00.c...@samsung.com> >> Acked-by: Lee Jones <lee.jo...@linaro.org> >> --- >> Changes since v2: >> - Rebase on top of v4.13-rc1 >> Changes since v1: >> Requested by Chanwoo Choi >> - Rename files changing _ for - >> - Remove the unneeded blank line on bottom of header. >> - Remove kobject.h and cros_ec_commands.h includes. >> - Remove the debug message as is not necessary. >> - Use the tab for indentation instead of space for if sentence. >> - Define each variable on different lines when the variables should be >> initialized. >> - Remove EXTCON_USB and EXTCON_USB_HOST as are not really used for now. >> - Add one blank line to split out between state and property setting. >> - Add the author information (header and module) >> >> Enric Balletbo >> - As Rob suggested to rename the compatible name to something indicating >> that >> is USB Type C related I also renamed the file names, extcon-cros-ec -> >> extcon-usbc-cros-ec, I think it's more clear. >> >> drivers/extcon/Kconfig | 7 + >> drivers/extcon/Makefile | 1 + >> drivers/extcon/extcon-usbc-cros-ec.c | 415 >> +++++++++++++++++++++++++++++++++++ >> include/linux/mfd/cros_ec_commands.h | 75 +++++++ >> 4 files changed, 498 insertions(+) >> create mode 100644 drivers/extcon/extcon-usbc-cros-ec.c >> >> diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig >> index 6d50071..a7bca42 100644 >> --- a/drivers/extcon/Kconfig >> +++ b/drivers/extcon/Kconfig >> @@ -150,4 +150,11 @@ config EXTCON_USB_GPIO >> Say Y here to enable GPIO based USB cable detection extcon support. >> Used typically if GPIO is used for USB ID pin detection. >> >> +config EXTCON_USBC_CROS_EC >> + tristate "ChromeOS Embedded Controller EXTCON support" >> + depends on MFD_CROS_EC >> + help >> + Say Y here to enable USB Type C cable detection extcon support when >> + using Chrome OS EC based USB Type-C ports. >> + >> endif >> diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile >> index ecfa958..a73624e 100644 >> --- a/drivers/extcon/Makefile >> +++ b/drivers/extcon/Makefile >> @@ -20,3 +20,4 @@ obj-$(CONFIG_EXTCON_QCOM_SPMI_MISC) += >> extcon-qcom-spmi-misc.o >> obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o >> obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o >> obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o >> +obj-$(CONFIG_EXTCON_USBC_CROS_EC) += extcon-usbc-cros-ec.o >> diff --git a/drivers/extcon/extcon-usbc-cros-ec.c >> b/drivers/extcon/extcon-usbc-cros-ec.c >> new file mode 100644 >> index 0000000..e759ed4 >> --- /dev/null >> +++ b/drivers/extcon/extcon-usbc-cros-ec.c >> @@ -0,0 +1,415 @@ >> +/** >> + * drivers/extcon/extcon-usbc-cros-ec - ChromeOS Embedded Controller extcon >> + * >> + * Copyright (C) 2017 Google, Inc >> + * Author: Benson Leung <ble...@chromium.org> >> + * >> + * This software is licensed under the terms of the GNU General Public >> + * License version 2, as published by the Free Software Foundation, and >> + * may be copied, distributed, and modified under those terms. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +#include <linux/extcon.h> >> +#include <linux/kernel.h> >> +#include <linux/mfd/cros_ec.h> >> +#include <linux/module.h> >> +#include <linux/notifier.h> >> +#include <linux/of.h> >> +#include <linux/platform_device.h> >> +#include <linux/slab.h> >> +#include <linux/sched.h> >> + >> +struct cros_ec_extcon_info { >> + struct device *dev; >> + struct extcon_dev *edev; >> + >> + int port_id; >> + >> + struct cros_ec_device *ec; >> + >> + struct notifier_block notifier; >> + >> + bool dp; /* DisplayPort enabled */ >> + bool mux; /* SuperSpeed (usb3) enabled */ >> + unsigned int power_type; >> +}; >> + >> +static const unsigned int usb_type_c_cable[] = { >> + EXTCON_DISP_DP, >> + EXTCON_NONE, >> +}; >> + >> +/** >> + * cros_ec_pd_command() - Send a command to the EC. >> + * @info: pointer to struct cros_ec_extcon_info >> + * @command: EC command >> + * @version: EC command version >> + * @outdata: EC command output data >> + * @outsize: Size of outdata >> + * @indata: EC command input data >> + * @insize: Size of indata >> + * >> + * Return: 0 on success, <0 on failure. >> + */ >> +static int cros_ec_pd_command(struct cros_ec_extcon_info *info, >> + unsigned int command, >> + unsigned int version, >> + void *outdata, >> + unsigned int outsize, >> + void *indata, >> + unsigned int insize) >> +{ >> + struct cros_ec_command *msg; >> + int ret; >> + >> + msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL); >> + >> + msg->version = version; >> + msg->command = command; >> + msg->outsize = outsize; >> + msg->insize = insize; >> + >> + if (outsize) >> + memcpy(msg->data, outdata, outsize); >> + >> + ret = cros_ec_cmd_xfer_status(info->ec, msg); >> + if (ret >= 0 && insize) >> + memcpy(indata, msg->data, insize); >> + >> + kfree(msg); >> + return ret; >> +} >> + >> +/** >> + * cros_ec_usb_get_power_type() - Get power type info about PD device >> attached >> + * to given port. >> + * @info: pointer to struct cros_ec_extcon_info >> + * >> + * Return: power type on success, <0 on failure. >> + */ >> +static int cros_ec_usb_get_power_type(struct cros_ec_extcon_info *info) >> +{ >> + struct ec_params_usb_pd_power_info req; >> + struct ec_response_usb_pd_power_info resp; >> + int ret; >> + >> + req.port = info->port_id; >> + ret = cros_ec_pd_command(info, EC_CMD_USB_PD_POWER_INFO, 0, >> + &req, sizeof(req), &resp, sizeof(resp)); >> + if (ret < 0) >> + return ret; >> + >> + return resp.type; >> +} >> + >> +/** >> + * cros_ec_usb_get_pd_mux_state() - Get PD mux state for given port. >> + * @info: pointer to struct cros_ec_extcon_info >> + * >> + * Return: PD mux state on success, <0 on failure. >> + */ >> +static int cros_ec_usb_get_pd_mux_state(struct cros_ec_extcon_info *info) >> +{ >> + struct ec_params_usb_pd_mux_info req; >> + struct ec_response_usb_pd_mux_info resp; >> + int ret; >> + >> + req.port = info->port_id; >> + ret = cros_ec_pd_command(info, EC_CMD_USB_PD_MUX_INFO, 0, >> + &req, sizeof(req), >> + &resp, sizeof(resp)); >> + if (ret < 0) >> + return ret; >> + >> + return resp.flags; >> +} >> + >> +/** >> + * cros_ec_usb_get_role() - Get role info about possible PD device attached >> to a >> + * given port. >> + * @info: pointer to struct cros_ec_extcon_info >> + * @polarity: pointer to cable polarity (return value) >> + * >> + * Return: role info on success, -ENOTCONN if no cable is connected, <0 on >> + * failure. >> + */ >> +static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info, >> + bool *polarity) >> +{ >> + struct ec_params_usb_pd_control pd_control; >> + struct ec_response_usb_pd_control_v1 resp; >> + int ret; >> + >> + pd_control.port = info->port_id; >> + pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE; >> + pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE; >> + ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1, >> + &pd_control, sizeof(pd_control), >> + &resp, sizeof(resp)); >> + if (ret < 0) >> + return ret; >> + >> + if (!(resp.enabled & PD_CTRL_RESP_ENABLED_CONNECTED)) >> + return -ENOTCONN; >> + >> + *polarity = resp.polarity; >> + >> + return resp.role; >> +} >> + >> +/** >> + * cros_ec_pd_get_num_ports() - Get number of EC charge ports. >> + * @info: pointer to struct cros_ec_extcon_info >> + * >> + * Return: number of ports on success, <0 on failure. >> + */ >> +static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info) >> +{ >> + struct ec_response_usb_pd_ports resp; >> + int ret; >> + >> + ret = cros_ec_pd_command(info, EC_CMD_USB_PD_PORTS, >> + 0, NULL, 0, &resp, sizeof(resp)); >> + if (ret < 0) >> + return ret; >> + >> + return resp.num_ports; >> +} >> + >> +static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info, >> + bool force) >> +{ >> + struct device *dev = info->dev; >> + int role, power_type; >> + bool polarity = false; >> + bool dp = false; >> + bool mux = false; >> + bool hpd = false; >> + >> + power_type = cros_ec_usb_get_power_type(info); >> + if (power_type < 0) { >> + dev_err(dev, "failed getting power type err = %d\n", >> + power_type); >> + return power_type; >> + } >> + >> + role = cros_ec_usb_get_role(info, &polarity); >> + if (role < 0) { >> + if (role != -ENOTCONN) { >> + dev_err(dev, "failed getting role err = %d\n", role); >> + return role; >> + } >> + } else { >> + int pd_mux_state; >> + >> + pd_mux_state = cros_ec_usb_get_pd_mux_state(info); >> + if (pd_mux_state < 0) >> + pd_mux_state = USB_PD_MUX_USB_ENABLED; >> + >> + dp = pd_mux_state & USB_PD_MUX_DP_ENABLED; >> + mux = pd_mux_state & USB_PD_MUX_USB_ENABLED; >> + hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ; >> + } >> + >> + if (force || info->dp != dp || info->mux != mux || >> + info->power_type != power_type) { >> + >> + info->dp = dp; >> + info->mux = mux; >> + info->power_type = power_type; >> + >> + extcon_set_state(info->edev, EXTCON_DISP_DP, dp); >> + >> + extcon_set_property(info->edev, EXTCON_DISP_DP, >> + EXTCON_PROP_USB_TYPEC_POLARITY, >> + (union >> extcon_property_value)(int)polarity); >> + extcon_set_property(info->edev, EXTCON_DISP_DP, >> + EXTCON_PROP_USB_SS, >> + (union extcon_property_value)(int)mux); >> + extcon_set_property(info->edev, EXTCON_DISP_DP, >> + EXTCON_PROP_DISP_HPD, >> + (union extcon_property_value)(int)hpd); >> + >> + extcon_sync(info->edev, EXTCON_DISP_DP); >> + >> + } else if (hpd) { >> + extcon_set_property(info->edev, EXTCON_DISP_DP, >> + EXTCON_PROP_DISP_HPD, >> + (union extcon_property_value)(int)hpd); >> + extcon_sync(info->edev, EXTCON_DISP_DP); >> + } >> + >> + return 0; >> +} >> + >> +static int extcon_cros_ec_event(struct notifier_block *nb, >> + unsigned long queued_during_suspend, >> + void *_notify) >> +{ >> + struct cros_ec_extcon_info *info; >> + struct cros_ec_device *ec; >> + u32 host_event; >> + >> + info = container_of(nb, struct cros_ec_extcon_info, notifier); >> + ec = info->ec; >> + >> + host_event = cros_ec_get_host_event(ec); >> + if (host_event & (EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) | >> + EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_MUX))) { >> + extcon_cros_ec_detect_cable(info, false); >> + return NOTIFY_OK; >> + } >> + >> + return NOTIFY_DONE; >> +} >> + >> +static int extcon_cros_ec_probe(struct platform_device *pdev) >> +{ >> + struct cros_ec_extcon_info *info; >> + struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent); >> + struct device *dev = &pdev->dev; >> + struct device_node *np = dev->of_node; >> + int numports, ret; >> + >> + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); >> + if (!info) >> + return -ENOMEM; >> + >> + info->dev = dev; >> + info->ec = ec; >> + >> + if (np) { >> + u32 port; >> + >> + ret = of_property_read_u32(np, "google,usb-port-id", &port); >> + if (ret < 0) { >> + dev_err(dev, "Missing google,usb-port-id property\n"); >> + return ret; >> + } >> + info->port_id = port; >> + } else { >> + info->port_id = pdev->id; >> + } >> + >> + numports = cros_ec_pd_get_num_ports(info); >> + if (numports < 0) { >> + dev_err(dev, "failed getting number of ports! ret = %d\n", >> + numports); >> + return numports; >> + } >> + >> + if (info->port_id >= numports) { >> + dev_err(dev, "This system only supports %d ports\n", numports); >> + return -ENODEV; >> + } >> + >> + info->edev = devm_extcon_dev_allocate(dev, usb_type_c_cable); >> + if (IS_ERR(info->edev)) { >> + dev_err(dev, "failed to allocate extcon device\n"); >> + return -ENOMEM; >> + } >> + >> + ret = devm_extcon_dev_register(dev, info->edev); >> + if (ret < 0) { >> + dev_err(dev, "failed to register extcon device\n"); >> + return ret; >> + } >> + >> + extcon_set_property_capability(info->edev, EXTCON_DISP_DP, >> + EXTCON_PROP_USB_TYPEC_POLARITY); >> + extcon_set_property_capability(info->edev, EXTCON_DISP_DP, >> + EXTCON_PROP_USB_SS); >> + extcon_set_property_capability(info->edev, EXTCON_DISP_DP, >> + EXTCON_PROP_DISP_HPD); >> + >> + platform_set_drvdata(pdev, info); >> + >> + /* Get PD events from the EC */ >> + info->notifier.notifier_call = extcon_cros_ec_event; >> + ret = blocking_notifier_chain_register(&info->ec->event_notifier, >> + &info->notifier); >> + if (ret < 0) { >> + dev_err(dev, "failed to register notifier\n"); >> + return ret; >> + } >> + >> + /* Perform initial detection */ >> + ret = extcon_cros_ec_detect_cable(info, true); >> + if (ret < 0) { >> + dev_err(dev, "failed to detect initial cable state\n"); >> + goto unregister_notifier; >> + } >> + >> + return 0; >> + >> +unregister_notifier: >> + blocking_notifier_chain_unregister(&info->ec->event_notifier, >> + &info->notifier); >> + return ret; >> +} >> + >> +static int extcon_cros_ec_remove(struct platform_device *pdev) >> +{ >> + struct cros_ec_extcon_info *info = platform_get_drvdata(pdev); >> + >> + blocking_notifier_chain_unregister(&info->ec->event_notifier, >> + &info->notifier); >> + >> + return 0; >> +} >> + >> +#ifdef CONFIG_PM_SLEEP >> +static int extcon_cros_ec_suspend(struct device *dev) >> +{ >> + return 0; >> +} >> + >> +static int extcon_cros_ec_resume(struct device *dev) >> +{ >> + int ret; >> + struct cros_ec_extcon_info *info = dev_get_drvdata(dev); >> + >> + ret = extcon_cros_ec_detect_cable(info, true); >> + if (ret < 0) >> + dev_err(dev, "failed to detect cable state on resume\n"); >> + >> + return 0; >> +} >> + >> +static const struct dev_pm_ops extcon_cros_ec_dev_pm_ops = { >> + SET_SYSTEM_SLEEP_PM_OPS(extcon_cros_ec_suspend, extcon_cros_ec_resume) >> +}; >> + >> +#define DEV_PM_OPS (&extcon_cros_ec_dev_pm_ops) >> +#else >> +#define DEV_PM_OPS NULL >> +#endif /* CONFIG_PM_SLEEP */ >> + >> +#ifdef CONFIG_OF >> +static const struct of_device_id extcon_cros_ec_of_match[] = { >> + { .compatible = "google,extcon-usbc-cros-ec" }, >> + { /* sentinel */ } >> +}; >> +MODULE_DEVICE_TABLE(of, extcon_cros_ec_of_match); >> +#endif /* CONFIG_OF */ >> + >> +static struct platform_driver extcon_cros_ec_driver = { >> + .driver = { >> + .name = "extcon-usbc-cros-ec", >> + .of_match_table = of_match_ptr(extcon_cros_ec_of_match), >> + .pm = DEV_PM_OPS, >> + }, >> + .remove = extcon_cros_ec_remove, >> + .probe = extcon_cros_ec_probe, >> +}; >> + >> +module_platform_driver(extcon_cros_ec_driver); >> + >> +MODULE_DESCRIPTION("ChromeOS Embedded Controller extcon driver"); >> +MODULE_AUTHOR("Benson Leung <ble...@chromium.org>"); >> +MODULE_LICENSE("GPL"); >> diff --git a/include/linux/mfd/cros_ec_commands.h >> b/include/linux/mfd/cros_ec_commands.h >> index 26ef492..fdea68c 100644 >> --- a/include/linux/mfd/cros_ec_commands.h >> +++ b/include/linux/mfd/cros_ec_commands.h >> @@ -285,10 +285,15 @@ enum host_event_code { >> EC_HOST_EVENT_HANG_DETECT = 20, >> /* Hang detect logic detected a hang and warm rebooted the AP */ >> EC_HOST_EVENT_HANG_REBOOT = 21, >> + /* PD MCU triggering host event */ >> + EC_HOST_EVENT_PD_MCU = 22, >> >> /* EC RTC event occurred */ >> EC_HOST_EVENT_RTC = 26, >> >> + /* EC desires to change state of host-controlled USB mux */ >> + EC_HOST_EVENT_USB_MUX = 28, >> + >> /* >> * The high bit of the event mask is not used as a host event code. If >> * it reads back as set, then the entire event mask should be >> @@ -2913,6 +2918,76 @@ struct ec_params_usb_pd_control { >> uint8_t mux; >> } __packed; >> >> +#define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */ >> +#define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */ >> +#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */ >> + >> +struct ec_response_usb_pd_control_v1 { >> + uint8_t enabled; >> + uint8_t role; >> + uint8_t polarity; >> + char state[32]; >> +} __packed; >> + >> +#define EC_CMD_USB_PD_PORTS 0x102 >> + >> +struct ec_response_usb_pd_ports { >> + uint8_t num_ports; >> +} __packed; >> + >> +#define EC_CMD_USB_PD_POWER_INFO 0x103 >> + >> +#define PD_POWER_CHARGING_PORT 0xff >> +struct ec_params_usb_pd_power_info { >> + uint8_t port; >> +} __packed; >> + >> +enum usb_chg_type { >> + USB_CHG_TYPE_NONE, >> + USB_CHG_TYPE_PD, >> + USB_CHG_TYPE_C, >> + USB_CHG_TYPE_PROPRIETARY, >> + USB_CHG_TYPE_BC12_DCP, >> + USB_CHG_TYPE_BC12_CDP, >> + USB_CHG_TYPE_BC12_SDP, >> + USB_CHG_TYPE_OTHER, >> + USB_CHG_TYPE_VBUS, >> + USB_CHG_TYPE_UNKNOWN, >> +}; >> + >> +struct usb_chg_measures { >> + uint16_t voltage_max; >> + uint16_t voltage_now; >> + uint16_t current_max; >> + uint16_t current_lim; >> +} __packed; >> + >> +struct ec_response_usb_pd_power_info { >> + uint8_t role; >> + uint8_t type; >> + uint8_t dualrole; >> + uint8_t reserved1; >> + struct usb_chg_measures meas; >> + uint32_t max_power; >> +} __packed; >> + >> +/* Get info about USB-C SS muxes */ >> +#define EC_CMD_USB_PD_MUX_INFO 0x11a >> + >> +struct ec_params_usb_pd_mux_info { >> + uint8_t port; /* USB-C port number */ >> +} __packed; >> + >> +/* Flags representing mux state */ >> +#define USB_PD_MUX_USB_ENABLED (1 << 0) >> +#define USB_PD_MUX_DP_ENABLED (1 << 1) >> +#define USB_PD_MUX_POLARITY_INVERTED (1 << 2) >> +#define USB_PD_MUX_HPD_IRQ (1 << 3) >> + >> +struct ec_response_usb_pd_mux_info { >> + uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */ >> +} __packed; >> + >> >> /*****************************************************************************/ >> /* >> * Passthru commands >> > > > -- > Best Regards, > Chanwoo Choi > Samsung Electronics