On 21 June 2017 at 09:10, Viresh Kumar <viresh.ku...@linaro.org> wrote: > Some platforms have the capability to configure the performance state of > their Power Domains. The performance levels are identified by positive > integer values, a lower value represents lower performance state. > > This patch adds a new genpd API: pm_genpd_update_performance_state(). > The caller passes the affected device and the frequency representing its > next DVFS state. > > The power domains get two new callbacks: > > - get_performance_state(): This is called by the genpd core to retrieve > the performance state (integer value) corresponding to a target > frequency for the device. This state is used by the genpd core to find > the highest requested state by all the devices powered by a domain.
Please clarify this a bit more. I guess what you want to say is that genpd aggregates all requested performance state of all its devices and its subdomains, to be able to set a correct (highest requested) performance state. Moreover, could you perhaps explain a bit on *when* this callback becomes invoked. > > - set_performance_state(): The highest state retrieved from above > interface is then passed to this callback to finally program the > performance state of the power domain. When will this callback be invoked? What happens when a power domain gets powered off and then on. Is the performance state restored? Please elaborate a bit on this. > > The power domains can avoid supplying these callbacks, if they don't > support setting performance-states. > > A power domain may have only get_performance_state() callback, if it > doesn't have the capability of changing the performance state itself but > someone in its parent hierarchy has. > > A power domain may have only set_performance_state(), if it doesn't have > any direct devices below it but subdomains. And so the > get_performance_state() will never get called from the core. > It seems like the ->get_perfomance_state() is a device specific callback, while the ->set_performance_state() is a genpd domain callback. I am wondering whether we should try to improve the names of the callbacks to reflect this. > The more common case would be to have both the callbacks set. > > Another API, pm_genpd_has_performance_state(), is also added to let > other parts of the kernel check if the power domain of a device supports > performance-states or not. This could have been done from I think a better name of this function is: dev_pm_genpd_has_performance_state(). What do you think? We might even want to decide to explicitly stay using the terminology "DVFS" instead. In such case, perhaps converting the names of the callbacks/API to use "dvfs" instead. For the API added here, maybe dev_pm_genpd_can_dvfs(). > pm_genpd_update_performance_state() as well, but that routine gets > called every time we do DVFS for the device and it wouldn't be optimal > in that case. So pm_genpd_update_performance_state() is also a new API added in $subject patch. But there is no information about it in the changelog, besides the above. Please add that. Moreover, perhaps we should rename the function to dev_pm_genpd_set_dvfs() > > Note that, the performance level as returned by > ->get_performance_state() for the parent domain of a device is used for > all domains in parent hierarchy. Please clarify a bit on this. What exactly does this mean? > > Tested-by: Rajendra Nayak <rna...@codeaurora.org> > Signed-off-by: Viresh Kumar <viresh.ku...@linaro.org> > --- > drivers/base/power/domain.c | 223 > ++++++++++++++++++++++++++++++++++++++++++++ > include/linux/pm_domain.h | 22 +++++ > 2 files changed, 245 insertions(+) > > diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c > index 71c95ad808d5..d506be9ff1f7 100644 > --- a/drivers/base/power/domain.c > +++ b/drivers/base/power/domain.c > @@ -466,6 +466,229 @@ static int genpd_dev_pm_qos_notifier(struct > notifier_block *nb, > return NOTIFY_DONE; > } > > +/* > + * Returns true if anyone in genpd's parent hierarchy has > + * set_performance_state() set. > + */ > +static bool genpd_has_set_performance_state(struct generic_pm_domain *genpd) > +{ So this function will be become in-directly called by generic drivers that supports DVFS of the genpd for their devices. I think the data you validate here would be better to be pre-validated at pm_genpd_init() and at pm_genpd_add|remove_subdomain() and the result stored in a variable in the genpd struct. Especially when a subdomain is added, that is a point when you can verify the *_performance_state() callbacks, and thus make sure it's a correct setup from the topology point of view. > + struct gpd_link *link; > + > + if (genpd->set_performance_state) > + return true; > + > + list_for_each_entry(link, &genpd->slave_links, slave_node) { > + if (genpd_has_set_performance_state(link->master)) > + return true; > + } > + > + return false; > +} > + > +/** > + * pm_genpd_has_performance_state - Checks if power domain does performance > + * state management. > + * > + * @dev: Device whose power domain is getting inquired. > + * > + * This must be called by the user drivers, before they start calling > + * pm_genpd_update_performance_state(), to guarantee that all dependencies > are > + * met and the device's genpd supports performance states. > + * > + * It is assumed that the user driver guarantees that the genpd wouldn't be > + * detached while this routine is getting called. > + * > + * Returns "true" if device's genpd supports performance states, "false" > + * otherwise. > + */ > +bool pm_genpd_has_performance_state(struct device *dev) > +{ > + struct generic_pm_domain *genpd = genpd_lookup_dev(dev); > + > + /* The parent domain must have set get_performance_state() */ This comment is wrong. This is not about *parent* domains. Instead I think it should say: "The genpd must have the ->get_performance_state() assigned." ... > + if (!IS_ERR(genpd) && genpd->get_performance_state) { > + if (genpd_has_set_performance_state(genpd)) > + return true; ... while this is about verifying that some of the domains (genpds) in domain topology has a ->set_performance_state() callback. In other words, either the genpd or some of its masters must have a ->set_performance_state() callback. That makes me wonder: what will happen if there are more than one master having a ->set_perfomance_state() callback assigned? I guess that is non-allowed configuration? > + > + /* > + * A genpd with ->get_performance_state() callback must also > + * allow setting performance state. > + */ > + dev_err(dev, "genpd doesn't support setting performance > state\n"); > + } > + > + return false; > +} > +EXPORT_SYMBOL_GPL(pm_genpd_has_performance_state); > + > +/* > + * Re-evaluate performance state of a power domain. Finds the highest > requested > + * performance state by the devices and subdomains within the power domain > and > + * then tries to change its performance state. If the power domain doesn't > have > + * a set_performance_state() callback, then we move the request to its parent > + * power domain. > + * > + * Locking: Access (or update) to device's "pd_data->performance_state" field > + * happens only with parent domain's lock held. Subdomains have their What is a *parent* domain here? In genpd we try to use the terminology of master- and sub-domains. Could you re-phrase this to get some clarity on what you try to explain from the above? > + * "genpd->performance_state" protected with their own lock (and they are the > + * only user of this field) and their per-parent-domain > + * "link->performance_state" field is protected with individual parent power > + * domain's lock and is only accessed/updated with that lock held. > + */ I recall we discussed this off-list, but I am not sure this was the conclusion on how to solve the locking. :-) More comments below. > +static int genpd_update_performance_state(struct generic_pm_domain *genpd, > + int depth) > +{ > + struct generic_pm_domain_data *pd_data; > + struct generic_pm_domain *master; > + struct pm_domain_data *pdd; > + unsigned int state = 0, prev; > + struct gpd_link *link; > + int ret; > + > + /* Traverse all devices within the domain */ > + list_for_each_entry(pdd, &genpd->dev_list, list_node) { > + pd_data = to_gpd_data(pdd); > + > + if (pd_data->performance_state > state) > + state = pd_data->performance_state; > + } I don't think walking the list of devices for each master domain is necessary, unless the aggregated performance state from the subdomain was increased. > + > + /* Traverse all subdomains within the domain */ > + list_for_each_entry(link, &genpd->master_links, master_node) { > + if (link->performance_state > state) > + state = link->performance_state; > + } > + >From a locking point of view we always traverse the topology from bottom an up. In other words, we walk the genpd's ->slave_links, and lock the masters in the order the are defined via the slave_links list. The order is important to avoid deadlocks. I don't think you should walk the master_links as being done above, especially not without using locks. > + if (genpd->performance_state == state) > + return 0; > + > + if (genpd->set_performance_state) { > + ret = genpd->set_performance_state(genpd, state); > + if (!ret) > + genpd->performance_state = state; > + > + return ret; This looks wrong. I think you should continue to walk upwards in the domain topology, as there may be some other master than needs to get its performance state updated. > + } > + > + /* > + * Not all domains support updating performance state. Move on to > their > + * parent domains in that case. /s/parent/master > + */ > + prev = genpd->performance_state; > + > + list_for_each_entry(link, &genpd->slave_links, slave_node) { > + master = link->master; > + > + genpd_lock_nested(master, depth + 1); > + > + link->performance_state = state; > + ret = genpd_update_performance_state(master, depth + 1); > + if (ret) > + link->performance_state = prev; > + > + genpd_unlock(master); > + > + if (ret) > + goto err; > + } > + A general comment is that I think you should look more closely in the code of genpd_power_off|on(). And also how it calls the ->power_on|off() callbacks. Depending whether you want to update the performance state of the master domain before the subdomain or the opposite, you will find one of them being suited for this case as well. > + /* > + * The parent domains are updated now, lets get genpd > performance_state > + * in sync with those. > + */ > + genpd->performance_state = state; > + return 0; > + > +err: > + list_for_each_entry_continue_reverse(link, &genpd->slave_links, > + slave_node) { > + master = link->master; > + > + genpd_lock_nested(master, depth + 1); > + link->performance_state = prev; > + if (genpd_update_performance_state(master, depth + 1)) > + pr_err("%s: Failed to roll back to %d performance > state\n", > + genpd->name, prev); > + genpd_unlock(master); > + } > + > + return ret; > +} > + > +static int __dev_update_performance_state(struct device *dev, int state) Please use the prefix genpd, _genpd_ or __genpd for static functions. > +{ > + struct generic_pm_domain_data *gpd_data; > + int ret; > + > + spin_lock_irq(&dev->power.lock); Actually there is no need to use this lock. Because you hold the genpd lock here, then the device can't be removed from its genpd and thus there is always a valid gpd_data. > + > + if (!dev->power.subsys_data || !dev->power.subsys_data->domain_data) { > + ret = -ENODEV; > + goto unlock; > + } > + > + gpd_data = to_gpd_data(dev->power.subsys_data->domain_data); > + > + ret = gpd_data->performance_state; > + gpd_data->performance_state = state; > + > +unlock: > + spin_unlock_irq(&dev->power.lock); > + > + return ret; > +} > + > +/** > + * pm_genpd_update_performance_state - Update performance state of device's > + * parent power domain for the target frequency for the device. > + * > + * @dev: Device for which the performance-state needs to be adjusted. > + * @rate: Device's next frequency. This can be set as 0 when the device > doesn't > + * have any performance state constraints left (And so the device wouldn't > + * participate anymore to find the target performance state of the genpd). > + * > + * This must be called by the user drivers (as many times as they want) only > + * after pm_genpd_has_performance_state() is called (only once) and that > + * returned "true". > + * > + * It is assumed that the user driver guarantees that the genpd wouldn't be > + * detached while this routine is getting called. > + * > + * Returns 0 on success and negative error values on failures. > + */ > +int pm_genpd_update_performance_state(struct device *dev, unsigned long rate) > +{ > + struct generic_pm_domain *genpd = dev_to_genpd(dev); > + int ret, state; > + > + if (IS_ERR(genpd)) > + return -ENODEV; > + > + genpd_lock(genpd); > + > + state = genpd->get_performance_state(dev, rate); > + if (state < 0) { > + ret = state; > + goto unlock; > + } > + > + state = __dev_update_performance_state(dev, state); > + if (state < 0) { > + ret = state; > + goto unlock; > + } > + > + ret = genpd_update_performance_state(genpd, 0); > + if (ret) > + __dev_update_performance_state(dev, state); > + > +unlock: > + genpd_unlock(genpd); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(pm_genpd_update_performance_state); > + > /** > * genpd_power_off_work_fn - Power off PM domain whose subdomain count is 0. > * @work: Work structure used for scheduling the execution of this function. > diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h > index b7803a251044..bf90177208a2 100644 > --- a/include/linux/pm_domain.h > +++ b/include/linux/pm_domain.h > @@ -63,8 +63,12 @@ struct generic_pm_domain { > unsigned int device_count; /* Number of devices */ > unsigned int suspended_count; /* System suspend device counter */ > unsigned int prepared_count; /* Suspend counter of prepared > devices */ > + unsigned int performance_state; /* Max requested performance state */ > int (*power_off)(struct generic_pm_domain *domain); > int (*power_on)(struct generic_pm_domain *domain); > + int (*get_performance_state)(struct device *dev, unsigned long rate); > + int (*set_performance_state)(struct generic_pm_domain *domain, > + unsigned int state); > struct gpd_dev_ops dev_ops; > s64 max_off_time_ns; /* Maximum allowed "suspended" time. */ > bool max_off_time_changed; > @@ -99,6 +103,9 @@ struct gpd_link { > struct list_head master_node; > struct generic_pm_domain *slave; > struct list_head slave_node; > + > + /* Sub-domain's per-parent domain performance state */ > + unsigned int performance_state; How about aggregate_dvfs_state, and move it to the struct generic_pm_domain. Because I think you only need to keep track one aggregated state per domain and per each subdomain, right? > }; > > struct gpd_timing_data { > @@ -118,6 +125,7 @@ struct generic_pm_domain_data { > struct pm_domain_data base; > struct gpd_timing_data td; > struct notifier_block nb; > + unsigned int performance_state; > void *data; > }; > > @@ -148,6 +156,9 @@ extern int pm_genpd_remove(struct generic_pm_domain > *genpd); > > extern struct dev_power_governor simple_qos_governor; > extern struct dev_power_governor pm_domain_always_on_gov; > +extern bool pm_genpd_has_performance_state(struct device *dev); > +extern int pm_genpd_update_performance_state(struct device *dev, > + unsigned long rate); Please move these above governor defines, as to be consistent with below changes. > #else > > static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev) > @@ -185,6 +196,17 @@ static inline int pm_genpd_remove(struct > generic_pm_domain *genpd) > return -ENOTSUPP; > } > > +static inline bool pm_genpd_has_performance_state(struct device *dev) > +{ > + return false; > +} > + > +static inline int pm_genpd_update_performance_state(struct device *dev, > + unsigned long rate) > +{ > + return -ENOTSUPP; > +} > + > #define simple_qos_governor (*(struct dev_power_governor *)(NULL)) > #define pm_domain_always_on_gov (*(struct dev_power_governor > *)(NULL)) > #endif > -- > 2.13.0.71.gd7076ec9c9cb > Huh, I hope my comments make some sense. It's a bit of tricky code, when walking the domain topology and I think there are couple optimization we can do while doing that. Hopefully you can understand most of my comments at least. :-) Feel free to ping me on IRC, if further explanations is needed. Kind regards Uffe