This is the patch series for TPS68470 PMIC that works as a camera PMIC.
The patch series provide the following 3 drivers, to help configure the voltage
regulators, clocks and GPIOs provided by the TPS68470 PMIC, to be able to use
the camera sensors connected to this PMIC.
TPS68470 MFD driver:
This is the multi function driver that initializes the TPS68470 PMIC and
supports the GPIO and Op Region functions.
TPS68470 GPIO driver:
This is the PMIC GPIO driver that will be used by the OS GPIO layer, when the
BIOS / firmware triggered GPIO access is done.
TPS68470 Op Region driver:
This is the driver that will be invoked, when the BIOS / firmware configures
the voltage / clock for the sensors / vcm devices connected to the PMIC.
---
Update on 2 GPIO chips implementation over 1:
- Attempted to implement 2 GPIO chips, but ran into couple of
issues in the kernel, so we couldn't get it to work.
- It was decided to postpone this change, since it is not
critical
Changes in v4:
- MFD driver:
- Removed board specific code and FIXME comment
- Moved i2c.h include from tps68470.h to tps68470.c
- Moved the TPS68470 REVID read code after PMIC reset
- Fixed typo in debug error message (on failure of
devm_mfd_add_devices() )
- Enhanced dependency on I2C by changing it to I2C=y
(to fix build errors if I2C is built as module
e.g tps68470.c:71: undefined reference to `__devm_regmap_init_i2c'
tps68470.c:117: undefined reference to `i2c_register_driver')
- Removed most of the unused header file definitions
- Moved devm_mfd_add_devices() after PMIC resett
- Used probe_new() and removed i2c_device_id table
The following patch from Andy is needed for the driver to be
probed.
http://marc.info/?l=linux-acpi&m=150030081523885&w=2
- GPIO driver:
- Added newline at the end of Kconfig description
- Updated commit message about the descriptive
names for the GPIOs and the typical usage model
of the GPIO driver
- Opregion driver:
- Added dependency on MFD_TPS68470
- Converted 2 liner into one line code
Changes in v3:
- MFD driver:
- Removed GPIO lookup table
- Reverted to probe() for consistency
- Addressed other comments from Andy
- GPIO driver:
- Removed the code that initializes the default values
of GPIOs to zeros
- Used gpiochip_get_data() to access data inside the gpio_chip
Changes in v2:
- MFD driver:
- Removed tps68470_* wrappers around regmap_* calls
- Removed "struct tps68470"
- used devm_mfd_add_devices and removed mutex in mfd driver
- Added reasoning about the need of having mfd driver
as bool/builtin
- Opregion driver:
- renamed opregion driver file / internal symbol names
with tps68470_pmic*
- Made opregion driver tables as const
- Removed unused *handler_context in common handler
- Replaced "int" with "unsigned int"
- Changed to WARN macro to dev_warn()
- Destroyed mutex on error
- Added reasoning about the need of having Opregion driver
as bool/builtin
- GPIO driver:
- Implemented get_direction() in the GPIO driver
- Setup gpio_chip.names
- Moved the GPIO lookup table code inside mfd driver
- Added reasoning about the need of having GPIO driver
as bool/builtin
---
Rajmohan Mani (3):
mfd: Add new mfd device TPS68470
gpio: Add support for TPS68470 GPIOs
ACPI / PMIC: Add TI PMIC TPS68470 operation region driver
drivers/acpi/Kconfig | 16 ++
drivers/acpi/Makefile | 2 +
drivers/acpi/pmic/tps68470_pmic.c | 455 ++++++++++++++++++++++++++++++++++++++
drivers/gpio/Kconfig | 15 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-tps68470.c | 174 +++++++++++++++
drivers/mfd/Kconfig | 18 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/tps68470.c | 110 +++++++++
include/linux/mfd/tps68470.h | 97 ++++++++
10 files changed, 889 insertions(+)
create mode 100644 drivers/acpi/pmic/tps68470_pmic.c
create mode 100644 drivers/gpio/gpio-tps68470.c
create mode 100644 drivers/mfd/tps68470.c
create mode 100644 include/linux/mfd/tps68470.h
--
1.9.1
