v4:
  phy: qcom-qmp: Fix phy pipe clock name
        Based on Vivek's comments, return failure only for
        PCI/USB type of phys.
        Removed Ack.

  phy: qcom-qmp: Handle unavailable registers
        Removed this patch.
        Incorrectly used a block of code that is not applicable
        to IPQ8074, hence had to avoid an "unavailable" register.
        Since that is addressed using 'has_phy_com_ctrl' this
        patch is not needed.

  phy: qcom-qmp: Add support for IPQ8074
        Set 'has_phy_com_ctrl' to false
        Remove ipq8074_pciephy_regs_layout

v3:
  PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
        Incoporate Stan's feedback:-
         - Add SoC Wrapper and Synopsys Core IP versions

v2:
  dt-bindings: phy: qmp: Add output-clock-names
        Added Rob H's Ack

  dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
        Removed example
        Added IPQ8074 specific details

  phy: qcom-qmp: Fix phy pipe clock name
        Added Vivek's Ack

  phy: qcom-qmp: Handle unavailable registers
        No changes

  phy: qcom-qmp: Add support for IPQ8074
        No changes

  PCI: dwc: qcom: Use block IP version for operations
        Added new patch to use block IP version instead of v1, v2...

  dt-bindings: pci: qcom: Add support for IPQ8074
        Removed example
        Added IPQ8074 specific details

  PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
        Incorporated Bjorn's feedback:-
         - Removed reset names, helper function to assert/deassert, helper
           function to R/M/W register.
         - Renamed sys_noc clock as iface clock
         - Added deinit if phy power on fails

v1:
Add definitions required to enable QMP phy support for IPQ8074.

Add support for the IPQ8074 PCIe controller.  IPQ8074 supports
Gen 1/2, one lane, two PCIe root complex with support for MSI and
legacy interrupts, and it conforms to PCI Express Base 2.1
specification.

Varadarajan Narayanan (7):
  dt-bindings: phy: qmp: Add output-clock-names
  dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
  phy: qcom-qmp: Fix phy pipe clock name
  phy: qcom-qmp: Add support for IPQ8074
  PCI: dwc: qcom: Use block IP version for operations
  dt-bindings: pci: qcom: Add support for IPQ8074
  PCI: dwc: qcom: Add support for IPQ8074 PCIe controller

 .../devicetree/bindings/pci/qcom,pcie.txt          |  23 ++
 .../devicetree/bindings/phy/qcom-qmp-phy.txt       |  11 +
 drivers/pci/dwc/pcie-qcom.c                        | 378 +++++++++++++++++----
 drivers/phy/qualcomm/phy-qcom-qmp.c                | 169 ++++++++-
 4 files changed, 502 insertions(+), 79 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of 
Code Aurora Forum, hosted by The Linux Foundation

Reply via email to