Ups, linux-api, didn't make it into the CC list. Let's add it here.
The cover which will give you some context is here
http://lkml.kernel.org/r/20170721143915.14161-1-mho...@kernel.org
On Fri 21-07-17 16:39:07, Michal Hocko wrote:
> From: Michal Hocko <mho...@suse.com>
>
> Supporting zone ordered zonelists costs us just a lot of code while
> the usefulness is arguable if existent at all. Mel has already made
> node ordering default on 64b systems. 32b systems are still using
> ZONELIST_ORDER_ZONE because it is considered better to fallback to
> a different NUMA node rather than consume precious lowmem zones.
>
> This argument is, however, weaken by the fact that the memory reclaim
> has been reworked to be node rather than zone oriented. This means
> that lowmem requests have to skip over all highmem pages on LRUs already
> and so zone ordering doesn't save the reclaim time much. So the only
> advantage of the zone ordering is under a light memory pressure when
> highmem requests do not ever hit into lowmem zones and the lowmem
> pressure doesn't need to reclaim.
>
> Considering that 32b NUMA systems are rather suboptimal already and
> it is generally advisable to use 64b kernel on such a HW I believe we
> should rather care about the code maintainability and just get rid of
> ZONELIST_ORDER_ZONE altogether. Keep systcl in place and warn if
> somebody tries to set zone ordering either from kernel command line
> or the sysctl.
>
> Changes since v1
> - do not print Default in sysctl handler because our behavior was rather
> inconsistent in the past numa_zonelist_order was lowecase while
> zonelist_order_name was uppercase so boot time unchanged value woul
> print lowercase while updated value could be uppercase. Print "Node"
> which is the default instead - Mel
> - update documentation - Vlastimil
>
> Cc: linux-...@vger.kernel.org
> Acked-by: Mel Gorman <mgor...@suse.de>
> Acked-by: Vlastimil Babka <vba...@suse.cz>
> Signed-off-by: Michal Hocko <mho...@suse.com>
> ---
> Documentation/admin-guide/kernel-parameters.txt | 2 +-
> Documentation/sysctl/vm.txt | 4 +-
> Documentation/vm/numa | 7 +-
> include/linux/mmzone.h | 2 -
> kernel/sysctl.c | 2 -
> mm/page_alloc.c | 178
> +++---------------------
> 6 files changed, 29 insertions(+), 166 deletions(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt
> b/Documentation/admin-guide/kernel-parameters.txt
> index 60530c8490ff..28f1a0f84456 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -2724,7 +2724,7 @@
> Allowed values are enable and disable
>
> numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
> - one of ['zone', 'node', 'default'] can be specified
> + 'node', 'default' can be specified
> This can be set from sysctl after boot.
> See Documentation/sysctl/vm.txt for details.
>
> diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
> index 48244c42ff52..9baf66a9ef4e 100644
> --- a/Documentation/sysctl/vm.txt
> +++ b/Documentation/sysctl/vm.txt
> @@ -572,7 +572,9 @@ See Documentation/nommu-mmap.txt for more information.
>
> numa_zonelist_order
>
> -This sysctl is only for NUMA.
> +This sysctl is only for NUMA and it is deprecated. Anything but
> +Node order will fail!
> +
> 'where the memory is allocated from' is controlled by zonelists.
> (This documentation ignores ZONE_HIGHMEM/ZONE_DMA32 for simple explanation.
> you may be able to read ZONE_DMA as ZONE_DMA32...)
> diff --git a/Documentation/vm/numa b/Documentation/vm/numa
> index a08f71647714..a31b85b9bb88 100644
> --- a/Documentation/vm/numa
> +++ b/Documentation/vm/numa
> @@ -79,11 +79,8 @@ memory, Linux must decide whether to order the zonelists
> such that allocations
> fall back to the same zone type on a different node, or to a different zone
> type on the same node. This is an important consideration because some
> zones,
> such as DMA or DMA32, represent relatively scarce resources. Linux chooses
> -a default zonelist order based on the sizes of the various zone types
> relative
> -to the total memory of the node and the total memory of the system. The
> -default zonelist order may be overridden using the numa_zonelist_order kernel
> -boot parameter or sysctl. [see
> Documentation/admin-guide/kernel-parameters.rst and
> -Documentation/sysctl/vm.txt]
> +a default Node ordered zonelist. This means it tries to fallback to other
> zones
> +from the same node before using remote nodes which are ordered by NUMA
> distance.
>
> By default, Linux will attempt to satisfy memory allocation requests from the
> node to which the CPU that executes the request is assigned. Specifically,
> diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
> index fc14b8b3f6ce..b849006b20d3 100644
> --- a/include/linux/mmzone.h
> +++ b/include/linux/mmzone.h
> @@ -895,8 +895,6 @@ int sysctl_min_slab_ratio_sysctl_handler(struct ctl_table
> *, int,
>
> extern int numa_zonelist_order_handler(struct ctl_table *, int,
> void __user *, size_t *, loff_t *);
> -extern char numa_zonelist_order[];
> -#define NUMA_ZONELIST_ORDER_LEN 16 /* string buffer size */
>
> #ifndef CONFIG_NEED_MULTIPLE_NODES
>
> diff --git a/kernel/sysctl.c b/kernel/sysctl.c
> index 655686d546cb..0cbce40f5426 100644
> --- a/kernel/sysctl.c
> +++ b/kernel/sysctl.c
> @@ -1553,8 +1553,6 @@ static struct ctl_table vm_table[] = {
> #ifdef CONFIG_NUMA
> {
> .procname = "numa_zonelist_order",
> - .data = &numa_zonelist_order,
> - .maxlen = NUMA_ZONELIST_ORDER_LEN,
> .mode = 0644,
> .proc_handler = numa_zonelist_order_handler,
> },
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index 80e4adb4c360..b839a90e24c8 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -4791,52 +4791,18 @@ static int build_zonelists_node(pg_data_t *pgdat,
> struct zonelist *zonelist,
> return nr_zones;
> }
>
> -
> -/*
> - * zonelist_order:
> - * 0 = automatic detection of better ordering.
> - * 1 = order by ([node] distance, -zonetype)
> - * 2 = order by (-zonetype, [node] distance)
> - *
> - * If not NUMA, ZONELIST_ORDER_ZONE and ZONELIST_ORDER_NODE will create
> - * the same zonelist. So only NUMA can configure this param.
> - */
> -#define ZONELIST_ORDER_DEFAULT 0
> -#define ZONELIST_ORDER_NODE 1
> -#define ZONELIST_ORDER_ZONE 2
> -
> -/* zonelist order in the kernel.
> - * set_zonelist_order() will set this to NODE or ZONE.
> - */
> -static int current_zonelist_order = ZONELIST_ORDER_DEFAULT;
> -static char zonelist_order_name[3][8] = {"Default", "Node", "Zone"};
> -
> -
> #ifdef CONFIG_NUMA
> -/* The value user specified ....changed by config */
> -static int user_zonelist_order = ZONELIST_ORDER_DEFAULT;
> -/* string for sysctl */
> -#define NUMA_ZONELIST_ORDER_LEN 16
> -char numa_zonelist_order[16] = "default";
> -
> -/*
> - * interface for configure zonelist ordering.
> - * command line option "numa_zonelist_order"
> - * = "[dD]efault - default, automatic configuration.
> - * = "[nN]ode - order by node locality, then by zone within node
> - * = "[zZ]one - order by zone, then by locality within zone
> - */
>
> static int __parse_numa_zonelist_order(char *s)
> {
> - if (*s == 'd' || *s == 'D') {
> - user_zonelist_order = ZONELIST_ORDER_DEFAULT;
> - } else if (*s == 'n' || *s == 'N') {
> - user_zonelist_order = ZONELIST_ORDER_NODE;
> - } else if (*s == 'z' || *s == 'Z') {
> - user_zonelist_order = ZONELIST_ORDER_ZONE;
> - } else {
> - pr_warn("Ignoring invalid numa_zonelist_order value: %s\n", s);
> + /*
> + * We used to support different zonlists modes but they turned
> + * out to be just not useful. Let's keep the warning in place
> + * if somebody still use the cmd line parameter so that we do
> + * not fail it silently
> + */
> + if (!(*s == 'd' || *s == 'D' || *s == 'n' || *s == 'N')) {
> + pr_warn("Ignoring unsupported numa_zonelist_order value:
> %s\n", s);
> return -EINVAL;
> }
> return 0;
> @@ -4844,16 +4810,10 @@ static int __parse_numa_zonelist_order(char *s)
>
> static __init int setup_numa_zonelist_order(char *s)
> {
> - int ret;
> -
> if (!s)
> return 0;
>
> - ret = __parse_numa_zonelist_order(s);
> - if (ret == 0)
> - strlcpy(numa_zonelist_order, s, NUMA_ZONELIST_ORDER_LEN);
> -
> - return ret;
> + return __parse_numa_zonelist_order(s);
> }
> early_param("numa_zonelist_order", setup_numa_zonelist_order);
>
> @@ -4864,40 +4824,22 @@ int numa_zonelist_order_handler(struct ctl_table
> *table, int write,
> void __user *buffer, size_t *length,
> loff_t *ppos)
> {
> - char saved_string[NUMA_ZONELIST_ORDER_LEN];
> + char *str;
> int ret;
> - static DEFINE_MUTEX(zl_order_mutex);
>
> - mutex_lock(&zl_order_mutex);
> - if (write) {
> - if (strlen((char *)table->data) >= NUMA_ZONELIST_ORDER_LEN) {
> - ret = -EINVAL;
> - goto out;
> - }
> - strcpy(saved_string, (char *)table->data);
> + if (!write) {
> + int len = sizeof("Node");
> + if (copy_to_user(buffer, "Node", len))
> + return -EFAULT;
> + return len;
> }
> - ret = proc_dostring(table, write, buffer, length, ppos);
> - if (ret)
> - goto out;
> - if (write) {
> - int oldval = user_zonelist_order;
>
> - ret = __parse_numa_zonelist_order((char *)table->data);
> - if (ret) {
> - /*
> - * bogus value. restore saved string
> - */
> - strncpy((char *)table->data, saved_string,
> - NUMA_ZONELIST_ORDER_LEN);
> - user_zonelist_order = oldval;
> - } else if (oldval != user_zonelist_order) {
> - mutex_lock(&zonelists_mutex);
> - build_all_zonelists(NULL, NULL);
> - mutex_unlock(&zonelists_mutex);
> - }
> - }
> -out:
> - mutex_unlock(&zl_order_mutex);
> + str = memdup_user_nul(buffer, 16);
> + if (IS_ERR(str))
> + return PTR_ERR(str);
> +
> + ret = __parse_numa_zonelist_order(str);
> + kfree(str);
> return ret;
> }
>
> @@ -5006,70 +4948,12 @@ static void build_thisnode_zonelists(pg_data_t *pgdat)
> */
> static int node_order[MAX_NUMNODES];
>
> -static void build_zonelists_in_zone_order(pg_data_t *pgdat, int nr_nodes)
> -{
> - int pos, j, node;
> - int zone_type; /* needs to be signed */
> - struct zone *z;
> - struct zonelist *zonelist;
> -
> - zonelist = &pgdat->node_zonelists[ZONELIST_FALLBACK];
> - pos = 0;
> - for (zone_type = MAX_NR_ZONES - 1; zone_type >= 0; zone_type--) {
> - for (j = 0; j < nr_nodes; j++) {
> - node = node_order[j];
> - z = &NODE_DATA(node)->node_zones[zone_type];
> - if (managed_zone(z)) {
> - zoneref_set_zone(z,
> - &zonelist->_zonerefs[pos++]);
> - check_highest_zone(zone_type);
> - }
> - }
> - }
> - zonelist->_zonerefs[pos].zone = NULL;
> - zonelist->_zonerefs[pos].zone_idx = 0;
> -}
> -
> -#if defined(CONFIG_64BIT)
> -/*
> - * Devices that require DMA32/DMA are relatively rare and do not justify a
> - * penalty to every machine in case the specialised case applies. Default
> - * to Node-ordering on 64-bit NUMA machines
> - */
> -static int default_zonelist_order(void)
> -{
> - return ZONELIST_ORDER_NODE;
> -}
> -#else
> -/*
> - * On 32-bit, the Normal zone needs to be preserved for allocations
> accessible
> - * by the kernel. If processes running on node 0 deplete the low memory zone
> - * then reclaim will occur more frequency increasing stalls and potentially
> - * be easier to OOM if a large percentage of the zone is under writeback or
> - * dirty. The problem is significantly worse if CONFIG_HIGHPTE is not set.
> - * Hence, default to zone ordering on 32-bit.
> - */
> -static int default_zonelist_order(void)
> -{
> - return ZONELIST_ORDER_ZONE;
> -}
> -#endif /* CONFIG_64BIT */
> -
> -static void set_zonelist_order(void)
> -{
> - if (user_zonelist_order == ZONELIST_ORDER_DEFAULT)
> - current_zonelist_order = default_zonelist_order();
> - else
> - current_zonelist_order = user_zonelist_order;
> -}
> -
> static void build_zonelists(pg_data_t *pgdat)
> {
> int i, node, load;
> nodemask_t used_mask;
> int local_node, prev_node;
> struct zonelist *zonelist;
> - unsigned int order = current_zonelist_order;
>
> /* initialize zonelists */
> for (i = 0; i < MAX_ZONELISTS; i++) {
> @@ -5099,15 +4983,7 @@ static void build_zonelists(pg_data_t *pgdat)
>
> prev_node = node;
> load--;
> - if (order == ZONELIST_ORDER_NODE)
> - build_zonelists_in_node_order(pgdat, node);
> - else
> - node_order[i++] = node; /* remember order */
> - }
> -
> - if (order == ZONELIST_ORDER_ZONE) {
> - /* calculate node order -- i.e., DMA last! */
> - build_zonelists_in_zone_order(pgdat, i);
> + build_zonelists_in_node_order(pgdat, node);
> }
>
> build_thisnode_zonelists(pgdat);
> @@ -5135,11 +5011,6 @@ static void setup_min_unmapped_ratio(void);
> static void setup_min_slab_ratio(void);
> #else /* CONFIG_NUMA */
>
> -static void set_zonelist_order(void)
> -{
> - current_zonelist_order = ZONELIST_ORDER_ZONE;
> -}
> -
> static void build_zonelists(pg_data_t *pgdat)
> {
> int node, local_node;
> @@ -5279,8 +5150,6 @@ build_all_zonelists_init(void)
> */
> void __ref build_all_zonelists(pg_data_t *pgdat, struct zone *zone)
> {
> - set_zonelist_order();
> -
> if (system_state == SYSTEM_BOOTING) {
> build_all_zonelists_init();
> } else {
> @@ -5306,9 +5175,8 @@ void __ref build_all_zonelists(pg_data_t *pgdat, struct
> zone *zone)
> else
> page_group_by_mobility_disabled = 0;
>
> - pr_info("Built %i zonelists in %s order, mobility grouping %s. Total
> pages: %ld\n",
> + pr_info("Built %i zonelists, mobility grouping %s. Total pages: %ld\n",
> nr_online_nodes,
> - zonelist_order_name[current_zonelist_order],
> page_group_by_mobility_disabled ? "off" : "on",
> vm_total_pages);
> #ifdef CONFIG_NUMA
> --
> 2.11.0
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majord...@kvack.org. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"d...@kvack.org";> em...@kvack.org </a>
--
Michal Hocko
SUSE Labs
