I have a rackmount server that has a dual port onboard 82546EB card.
I've googled and seen this card apparently active with other users but I seem to only get checksum errors. [ 0.194129] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI [ 0.194234] Copyright (c) 1999-2006 Intel Corporation. [ 0.194405] ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 51 (level, low) -> IRQ 16 [ 0.458732] e1000: 0000:04:09.0: e1000_probe: (PCI:66MHz:64-bit) 00:04:23:cd:93:d2 [ 0.489766] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 0.489889] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 30 (level, low) -> IRQ 17 [ 0.721071] e1000: 0000:03:07.0: e1000_probe: The EEPROM Checksum Is Not Valid [ 0.742509] ACPI: PCI interrupt for device 0000:03:07.0 disabled [ 0.742614] e1000: probe of 0000:03:07.0 failed with error -5 [ 0.742731] ACPI: PCI Interrupt 0000:03:07.1[B] -> GSI 31 (level, low) -> IRQ 18 [ 0.973865] e1000: 0000:03:07.1: e1000_probe: The EEPROM Checksum Is Not Valid [ 0.995304] ACPI: PCI interrupt for device 0000:03:07.1 disabled [ 0.995405] e1000: probe of 0000:03:07.1 failed with error -5 03:07.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 01) 03:07.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 01) 04: 09.0 Ethernet controller: Intel Corporation 82545GM Gigabit Ethernet Controller (rev 04) 03:07.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 01) Subsystem: Intel Corporation Unknown device 341a Flags: 66MHz, medium devsel, IRQ 17 Memory at fe5c0000 (64-bit, non-prefetchable) [size=128K] I/O ports at 2040 [size=64] Capabilities: [dc] Power Management version 2 Capabilities: [e4] PCI-X non-bridge device Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- 03:07.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 01) Subsystem: Intel Corporation Unknown device 341a Flags: 66MHz, medium devsel, IRQ 18 Memory at fe5e0000 (64-bit, non-prefetchable) [size=128K] I/O ports at 2000 [size=64] Capabilities: [dc] Power Management version 2 Capabilities: [e4] PCI-X non-bridge device Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- 04:09.0 Ethernet controller: Intel Corporation 82545GM Gigabit Ethernet Controller (rev 04) Subsystem: Intel Corporation PRO/1000 MT Server Adapter Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at fe8c0000 (64-bit, non-prefetchable) [size=128K] Memory at fe880000 (64-bit, non-prefetchable) [size=256K] I/O ports at 3000 [size=64] Expansion ROM at fe840000 [disabled] [size=256K] Capabilities: [dc] Power Management version 2 Capabilities: [e4] PCI-X non-bridge device The 82545GM card comes up fine but the 46EB card does not. This is 2.6.20-gentoo-r6 I'll be happy to fulfill information request if needed. Any suggestions that'd help me get the 46EB working? Thank you, David - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/