On Wed, Jul 26, 2017 at 02:48:54PM +0200, Rafael J. Wysocki wrote: > On Wednesday, July 26, 2017 11:32:44 AM Mika Westerberg wrote: > > On Tue, Jul 25, 2017 at 06:10:57PM +0200, Rafael J. Wysocki wrote: > > > On Tuesday, July 25, 2017 01:00:12 PM Mika Westerberg wrote: > > > > On Tue, Jul 25, 2017 at 01:31:00AM +0200, Rafael J. Wysocki wrote: > > > > > From: Rafael J. Wysocki <rafael.j.wyso...@intel.com> > > > > > > > > > > On one of my test machines nhi_mailbox_cmd() called from icm_suspend() > > > > > times out and returnes an error which then is propagated to the > > > > > caller and causes the entire system suspend to be aborted which isn't > > > > > very useful. > > > > > > > > > > Instead of aborting system suspend, print the error into the log > > > > > and continue. > > > > > > > > I agree, it should not prevent suspend but I wonder why it fails in the > > > > first place? Can you check what is the return value? > > > > > > As per the above, the error is a timeout, ie. -ETIMEDOUT. > > > > Ah, right I somehow missed that. > > > > Does it have Falcon Ridge controller or Alpine Ridge? > > I'll check later today, but i guess you'll know (see below).
No need to check, it is Alpine Ridge (since it is Dell 9360). > > Just to make sure, can you increase the timeout in nhi_mailbox_cmd() > > to 1000ms or so. It should not take that long though but better to check. > > Well, I can do that, but I don't think it will help. > > It just looks like the chip is not responding at all at that point. I see. Then I think we should apply your patch now and we can investigate this further offline and hopefully find the root cause for the problem. For this patch: Acked-by: Mika Westerberg <mika.westerb...@linux.intel.com> > > Which system this is BTW? > > It's the Dell 9360. :-) > > Sometimes after a reboot or a power cycle it starts in a state in which the > TBT controller and a USB one (which seem to be somehow connected) > appear to be dead or at least really flaky. Basically, the box needs to be > power-cycled again to get rid of this condition and then everything works. The xHCI controller is part of the Thunderbolt controller so whenever you have normal USB-C device connected there, you should also see the Alpine Ridge hierarchy in lspci output but the Thunderbolt host controller is not there.