Update the bindings doc and driver for pmi8994-gpio devices. Signed-off-by: Vivek Gautam <[email protected]> ---
- Have been using this patch-set on db820c [1] for extcon with usb controller. The usb controller uses one of these gpios for usb-id/vbus detection. [1] https://github.com/boddob/linux/tree/for-qcomlt/4.13rc2-merged Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 ++ drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 + 2 files changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 8d893a874634..74932318d41d 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -15,6 +15,7 @@ PMIC's from Qualcomm. "qcom,pm8921-gpio" "qcom,pm8941-gpio" "qcom,pm8994-gpio" + "qcom,pmi8994-gpio" "qcom,pma8084-gpio" And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" @@ -84,6 +85,7 @@ to specify in a pin configuration subnode: gpio1-gpio44 for pm8921 gpio1-gpio36 for pm8941 gpio1-gpio22 for pm8994 + gpio1-gpio10 for pmi8994 gpio1-gpio22 for pma8084 - function: diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 664b641fd776..bf0a6438424b 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -799,6 +799,7 @@ static int pmic_gpio_remove(struct platform_device *pdev) { .compatible = "qcom,pm8916-gpio" }, /* 4 GPIO's */ { .compatible = "qcom,pm8941-gpio" }, /* 36 GPIO's */ { .compatible = "qcom,pm8994-gpio" }, /* 22 GPIO's */ + { .compatible = "qcom,pmi8994-gpio" }, /* 10 GPIO's */ { .compatible = "qcom,pma8084-gpio" }, /* 22 GPIO's */ { .compatible = "qcom,spmi-gpio" }, /* Generic */ { }, -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
