Hi Andrew,
> -----Original Message-----
> From: Andrew Lunn [mailto:and...@lunn.ch]
> Sent: Saturday, July 29, 2017 12:49 AM
> To: Salil Mehta
> Cc: da...@davemloft.net; Zhuangyuzeng (Yisen); huangdaode; lipeng (Y);
> mehta.salil....@gmail.com; net...@vger.kernel.org; linux-
> ker...@vger.kernel.org; linux-r...@vger.kernel.org; Linuxarm
> Subject: Re: [PATCH V5 net-next 7/8] net: hns3: Add Ethtool support to
> HNS3 driver
>
> On Fri, Jul 28, 2017 at 11:26:51PM +0100, Salil Mehta wrote:
> > +static const struct hns3_link_mode_mapping hns3_lm_map[] = {
> > + {HNS3_LM_FIBRE_BIT, ETHTOOL_LINK_MODE_FIBRE_BIT, FLG},
> > + {HNS3_LM_AUTONEG_BIT, ETHTOOL_LINK_MODE_Autoneg_BIT, FLG},
> > + {HNS3_LM_TP_BIT, ETHTOOL_LINK_MODE_TP_BIT, FLG},
> > + {HNS3_LM_PAUSE_BIT, ETHTOOL_LINK_MODE_Pause_BIT, FLG},
> > + {HNS3_LM_BACKPLANE_BIT, ETHTOOL_LINK_MODE_Backplane_BIT, FLG},
> > + {HNS3_LM_10BASET_HALF_BIT, ETHTOOL_LINK_MODE_10baseT_Half_BIT,
> FLG},
> > + {HNS3_LM_10BASET_FULL_BIT, ETHTOOL_LINK_MODE_10baseT_Full_BIT,
> FLG},
> > + {HNS3_LM_100BASET_HALF_BIT, ETHTOOL_LINK_MODE_100baseT_Half_BIT,
> FLG},
> > + {HNS3_LM_100BASET_FULL_BIT, ETHTOOL_LINK_MODE_100baseT_Full_BIT,
> FLG},
> > + {HNS3_LM_1000BASET_FULL_BIT,
> ETHTOOL_LINK_MODE_1000baseT_Full_BIT, FLG},
> > +};
>
> It seems like all entries have link_mode_ksettings set to FLG. Which
> probably indicates it is pointless.
It is to support SUPPORTED and ADVERTISED link modes.
>
> > +
> > +static inline void hns3_driv_to_eth_caps(u32 caps,
> > + struct ethtool_link_ksettings *cmd)
>
> Please don't use inline anywhere except in header file stub
> functions. Let the compiler decide.
This was added as per Florian's comment.
>
> > +static int hns3_get_link_ksettings(struct net_device *netdev,
> > + struct ethtool_link_ksettings *cmd)
> > +{
> > + struct hns3_nic_priv *priv = netdev_priv(netdev);
> > + struct hnae3_handle *h = priv->ae_handle;
> > + u32 supported_caps;
> > + u32 advertised_caps;
> > + u8 media_type;
> > + u8 link_stat;
> > + u8 auto_neg;
> > + u8 duplex;
> > + u32 speed;
> > +
> > + if (!h->ae_algo || !h->ae_algo->ops)
> > + return -ESRCH;
>
> #define ESRCH 3 /* No such process */
>
> No such process ????
Seems weird return error. Will correct this. Thanks!
>
> Andrew
