On 08/01/2017 01:24 PM, Sean Young wrote:
This reverts commit 1104321a7b3bb670dc614ffa7958c553e7b3b836. The code is not dead at all and breaks winbond-cir. Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a CIR port lirc lirc0: lirc_dev: driver ir-lirc-codec (winbond-cir) registered at minor = 0 winbond-cir 00:03: Region 0x2f8-0x2ff already in use! winbond-cir: probe of 00:03 failed with error -16
You are right, uart->port.type gets overwritten, so it is definitely not dead code. That was an oversight from me, sorry for the inconvenience.
Reviewed-by: Matthias Brugger <mbrug...@suse.com>
Signed-off-by: Sean Young <s...@mess.org> --- drivers/tty/serial/8250/8250_core.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index b5def356af63..1aab3010fbfa 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1043,13 +1043,24 @@ int serial8250_register_8250_port(struct uart_8250_port *up) if (up->dl_write) uart->dl_write = up->dl_write;- if (serial8250_isa_config != NULL)- serial8250_isa_config(0, &uart->port, - &uart->capabilities); + if (uart->port.type != PORT_8250_CIR) { + if (serial8250_isa_config != NULL) + serial8250_isa_config(0, &uart->port, + &uart->capabilities); + + ret = uart_add_one_port(&serial8250_reg, + &uart->port); + if (ret == 0) + ret = uart->port.line; + } else { + dev_info(uart->port.dev, + "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n", + uart->port.iobase, + (unsigned long long)uart->port.mapbase, + uart->port.irq);- ret = uart_add_one_port(&serial8250_reg, &uart->port);- if (ret == 0) - ret = uart->port.line; + ret = 0; + } } mutex_unlock(&serial_mutex);
